Loading (50 kb)...'
(continued)
\1\ Within the range 6.0 to 9.0.
[40 FR 2341, Jan. 10, 1975, as amended at 60 FR 33963, June 29, 1995]
§ 428.83 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
top
The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable:
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of
product)
-----------------------------
COD....................................... 14.7 6.11
Oil and grease............................ 0.40 0.144
TSS....................................... 1.04 0.52
pH........................................ (\1\) (\1\)
-----------------------------
English
units (lb/
1,000 lb
of
product)
-----------------------------
COD....................................... 14.7 6.11
Oil and grease............................ 0.40 0.144
TSS....................................... 1.04 0.52
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.
§ 428.84 [Reserved]
top
§ 428.85 Standards of performance for new sources.
top
The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of
product)
-----------------------------
COD....................................... 14.7 6.11
Oil and grease............................ 0.40 0.144
TSS....................................... 1.04 0.52
pH........................................ (\1\) (\1\)
-----------------------------
English
units (lb/
1,000 lb
of
product)
-----------------------------
COD....................................... 14.7 6.11
Oil and grease............................ 0.40 0.144
TSS....................................... 1.04 0.52
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.
§ 428.86 Pretreatment standards for new sources.
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart:
------------------------------------------------------------------------
Pretreatment standards
-----------------------------
Average of daily
Pollutant or pollutant property Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of
product)
-----------------------------
COD....................................... 14.7 6.11
Oil and grease............................ (\1\) (\1\)
TSS....................................... (\2\) (\2\)
pH........................................ (\2\) (\2\)
-----------------------------
English
units (lb/
1,000 lb
of
product)
-----------------------------
COD....................................... 14.7 6.11
Oil and grease............................ (\1\) (\1\)
TSS....................................... (\2\) (\2\)
pH........................................ (\2\) (\2\)
------------------------------------------------------------------------
\1\ 100 mg/l.
\2\ No limitation.
[40 FR 2341, Jan. 10, 1975, as amended at 60 FR 33964, June 29, 1995]
Subpart I—Pan, Dry Digestion, and Mechanical Reclaimed Rubber Subcategory
top
Source: 40 FR 2342, Jan. 10, 1975, unless otherwise noted.
§ 428.90 Applicability; description of the pan, dry digestion, and mechanical reclaimed rubber subcategory.
top
The provisions of this subpart are applicable to process waste water discharges resulting from the production of reclaimed rubber except when produced by the wet digestion process.
§ 428.91 Specialized definitions.
top
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in part 401 of this chapter shall apply to this subpart.
§ 428.92 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
(a) The following limitations establish the quantity or quality of pollutants or pollutant properties controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best practicable control technology currently available:
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of
product)
-----------------------------
Oil and grease............................ 0.40 0.144
TSS....................................... 0.384 0.192
pH........................................ (\1\) (\1\)
-----------------------------
English
units (lb/
1,000 lb
of
product)
-----------------------------
Oil and grease............................ 0.40 0.144
TSS....................................... 0.384 0.192
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.
(b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to pan, dry digestion, and mechanical reclaimed rubber processes which are integrated with a wet digestion reclaimed process, which may be discharged by a point source subject to the provisions of this subpart after application of the best practicable control technology currently available, in addition to the limitations set forth by §428.92(a):
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of
product)
-----------------------------
COD....................................... 6.7 2.8
-----------------------------
English
units (lb/
1,000 lb
of
product)
-----------------------------
COD....................................... 6.7 2.8
------------------------------------------------------------------------
[40 FR 2342, Jan. 10, 1975, as amended at 60 FR 33964, June 29, 1995]
§ 428.93 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
top
(a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable:
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of
product)
-----------------------------
Oil and grease............................ 0.40 0.144
TSS....................................... 0.384 0.192
pH........................................ (\1\) (\1\)
-----------------------------
English
units (lb/
1,000 lb
of
product)
-----------------------------
Oil and grease............................ 0.40 0.144
TSS....................................... 0.384 0.192
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.
(b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to pan, dry digestion, and mechanical reclaimed rubber processes which are integrated with a wet digestion reclaimed rubber process, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable in addition to the limitations set forth by §428.93(a):
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of
product)
-----------------------------
COD....................................... 6.7 2.8
-----------------------------
English
units (lb/
1,000 lb
of
product)
-----------------------------
COD....................................... 6.7 2.8
------------------------------------------------------------------------
§ 428.94 [Reserved]
top
§ 428.95 Standards of performance for new sources.
top
(a) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of
product)
-----------------------------
Oil and grease............................ 0.40 0.144
TSS....................................... 0.384 0.192
pH........................................ (\1\) (\1\)
-----------------------------
English
units (lb/
1,000 lb
of
product)
-----------------------------
Oil and grease............................ 0.40 0.144
TSS....................................... 0.384 0.192
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.
(b) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to pan, dry digestion, and mechanical reclaimed rubber processes which are integrated with a wet digestion reclaimed rubber process, which may be discharged by a new source subject to the provisions of this subpart, in addition to the limitations set forth by §428.95:
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of
product)
-----------------------------
COD....................................... 6.7 2.8
-----------------------------
English
units (lb/
1,000 lb
of
product)
-----------------------------
COD....................................... 6.7 2.8
------------------------------------------------------------------------
§ 428.96 Pretreatment standards for new sources.
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403, in addition to the limitations set forth in paragraphs (a) and (b) of this section.
(a) The following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart:
------------------------------------------------------------------------
Pollutant or pollutant property Pretreatment standard
------------------------------------------------------------------------
pH........................................ No limitation.
TSS....................................... Do.
Oil and grease............................ 100 mg/l daily maximum.
------------------------------------------------------------------------
(b) The following pretreatment standard establishes the quantity or quality or pollutant properties controlled by this section and attributable to pan, dry digestion, and mechanical reclaimed rubber processes which are integrated with a wet digestion reclaimed rubber process, which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart, in addition to the limitations set forth by §428.96(a):
------------------------------------------------------------------------
Pretreatment standards
-----------------------------
Average of daily
Pollutant or pollutant property Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of
product)
-----------------------------
COD....................................... 6.7 2.8
-----------------------------
English
units (lb/
1,000 lb
of
product)
-----------------------------
COD....................................... 6.7 2.8
------------------------------------------------------------------------
[40 FR 2342, Jan. 10, 1975, as amended at 60 FR 33964, June 29, 1995]
Subpart J—Latex-Dipped, Latex-Extruded, and Latex-Molded Rubber Subcategory
top
Source: 40 FR 2344, Jan. 10, 1975, unless otherwise noted.
§ 428.100 Applicability; description of the latex-dipped, latex-extruded, and latex-molded rubber subcategory.
top
The provisions of this subpart are applicable to process waste water discharges resulting from the manufacture of latex-dipped, latex-extruded, and latex-molded products with the exception of those discharges from textile plants subject to the provisions of part 410 of this chapter.
§ 428.101 Specialized definitions.
top
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in part 401 of this chapter shall apply to this subpart.
(b) The term “chromium” shall mean total chromium.
(c) The term “raw material” shall mean all latex solids used in the manufacture of latex-dipped, latex-extruded, and latex-molded products.
§ 428.102 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
(a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best practicable control technology currently available:
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Oil and grease............................ 2.0 0.73
BOD5...................................... 3.72 2.20
TSS....................................... 6.96 2.90
pH........................................ (\1\) (\1\)
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Oil and grease............................ 2.0 0.73
BOD5...................................... 3.72 2.20
TSS....................................... 6.96 2.90
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.
(b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to plants employing the chromic acid form-cleaning operation, by a point source subject to the provisions of this subpart after application of the best practicable control technology currently available, in addition to the limitations set forth by §428.102(a):
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Chromium.................................. 0.0086 0.0036
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Chromium.................................. 0.0086 0.0036
------------------------------------------------------------------------
[40 FR 2344, Jan. 10, 1975, as amended at 60 FR 33964, June 29, 1995]
§ 428.103 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
top
(a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable:
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Oil and grease............................ 2.0 0.73
BOD5...................................... 3.72 2.20
TSS....................................... 6.96 2.90
pH........................................ (\1\) (\1\)
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Oil and grease............................ 2.0 0.73
BOD5...................................... 3.72 2.20
TSS....................................... 6.96 2.90
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.
(b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to plants employing the chromic acid form-cleaning operation, by a point source subject to the provisions of this subpart after application of the best available technology economically achievable, in addition to the limitations set forth by §428.103(a):
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Chromium.................................. 0.0086 0.0036
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Chromium.................................. 0.0086 0.0036
------------------------------------------------------------------------
§ 428.104 [Reserved]
top
§ 428.105 Standards of performance for new sources.
top
(a) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Oil and grease............................ 2.0 0.73
BOD5...................................... 3.72 2.20
TSS....................................... 6.96 2.90
pH........................................ (\1\) (\1\)
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Oil and grease............................ 2.0 0.73
BOD5...................................... 3.72 2.20
TSS....................................... 6.96 2.90
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.
(b) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to plants employing the chromic acid form-cleaning operation, which may be discharged by a new source subject to the provisions of this subpart, in addition to the limitations set forth by §428.102(a):
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Chromium.................................. 0.0086 0.0036
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Chromium.................................. 0.0086 0.0036
------------------------------------------------------------------------
§ 428.106 Pretreatment standards for new sources.
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403, in addition to the limitations set forth in paragraphs (a) and (b) of this section.
(a) The following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart:
------------------------------------------------------------------------
Pollutant or pollutant property Pretreatment standard
------------------------------------------------------------------------
pH........................................ No limitation.
BOD5...................................... Do.
TSS....................................... Do.
Oil and grease............................ 100 mg/l daily maximum.
------------------------------------------------------------------------
(b) The following pretreatment standard establishes the quantity or quality of pollutant properties controlled by this section and attributable to plants employing the chromic acid form-cleaning operation, which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart, in addition to the limitations set forth by §428.106(a):
------------------------------------------------------------------------
Pretreatment standards
-----------------------------
Average of daily
Pollutant or pollutant property Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Chromium.................................. 0.0086 0.0036
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Chromium.................................. 0.0086 0.0036
------------------------------------------------------------------------
[40 FR 2344, Jan. 10, 1975, as amended at 60 FR 33964, June 29, 1995]
Subpart K—Latex Foam Subcategory
top
Source: 40 FR 2345, Jan. 10, 1975, unless otherwise noted.
§ 428.110 Applicability; description of the latex foam subcategory.
top
The provisions of this subpart are applicable to process waste water discharges resulting from the manufacture of latex foam except for those discharges from textile plants subject to the provisions of part 410 of this chapter.
§ 428.111 Specialized definitions.
top
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in part 401 of this chapter shall apply to this subpart.
(b) The term “raw material” shall mean all latex solids used in the manufacture of latex foam.
§ 428.112 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Zinc...................................... 0.058 0.024
BOD5...................................... 2.4 1.4
TSS....................................... 2.26 0.94
pH........................................ (\1\) (\1\)
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Zinc...................................... 0.058 0.024
BOD5...................................... 2.4 1.4
TSS....................................... 2.26 0.94
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.
[40 FR 2345, Jan. 10, 1975, as amended at 60 FR 33964, June 29, 1995]
§ 428.113 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
top
The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable:
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Zinc...................................... 0.058 0.024
BOD5...................................... 2.4 1.4
TSS....................................... 2.26 0.94
pH........................................ (\1\) (\1\)
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Zinc...................................... 0.058 0.024
BOD5...................................... 2.4 1.4
TSS....................................... 2.26 0.94
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.
§ 428.114 [Reserved]
top
§ 428.115 Standards of performance for new sources.
top
The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)----------------------------- (continued)