Loading (50 kb)...'
(continued)
Oil and grease............................ 100 mg/l daily maximum.
------------------------------------------------------------------------
(b) The following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to lead-sheathed hose production, which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart, in addition to the limitations set forth by §428.56(a):
------------------------------------------------------------------------
Pretreatment standards
-----------------------------
Average of daily
values for
Pollutant or pollutant property Maximum thirty
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Lead...................................... 0.0017 0.0007
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Lead...................................... 0.0017 0.0007
------------------------------------------------------------------------
[40 FR 2336, Jan. 10, 1975, as amended at 60 FR 33963, June 29, 1995]
Subpart F—Medium-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory
top
Source: 40 FR 2338, Jan. 10, 1975, unless otherwise noted.
§ 428.60 Applicability; description of the medium-sized general molded, extruded, and fabricated rubber plants subcategory.
top
The following provisions of this subpart are applicable to process waste water discharges resulting from the production of molded, extruded, and fabricated rubber products, foam rubber backing, rubber cement-dipped goods, and retreaded tires by medium-sized plants. Specifically excluded from the provisions of this subpart are the discharges resulting from the production of latex-based products, tires and inner tubes, and those discharges from textile plants subject to the provisions of part 410 of this chapter.
§ 428.61 Specialized definitions.
top
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in part 401 of this chapter shall apply to this subpart.
(b) The term “raw material” shall mean all natural and synthetic rubber, carbon black, oils, chemical compounds, and fabric used in the manufacture of general molded, extruded, and fabricated rubber products.
(c) The term “raw material equivalent” shall be equal to the raw material usage multiplied by the volume of air scrubbed via wet scrubbers divided by the total volume of air scrubbed.
(d) The term “medium-sized plants” shall mean plants which process between 3,720 kg/day (8,200 lbs/day) and 10,430 kg/day (23,000 lbs/day) of raw materials.
§ 428.62 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
(a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best practicable control technology currently available:
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Oil and grease............................ 0.42 0.15
TSS....................................... 0.80 0.40
pH........................................ (\1\) (\1\)
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Oil and grease............................ 0.42 0.15
TSS....................................... 0.80 0.40
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.
(b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to leadsheathed hose production, which may be discharged by a point source subject to the provisions of this subpart after application of the best practicable control technology currently available, in addition to the limitations set forth by §428.62(a):
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Lead...................................... 0.0017 0.0007
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Lead...................................... 0.0017 0.0007
------------------------------------------------------------------------
(c) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to wet scrubbers, which may be discharged by a point source subject to the provisions of this subpart after application of the best practicable control technology currently available, in addition to the limitations set forth by §428.62(a):
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material
equivalent
)
-----------------------------
TSS....................................... 5.8 2.9
-----------------------------
English
units (lb/
1,000 lb
of raw
material
equivalent
)
-----------------------------
TSS....................................... 5.8 2.9
------------------------------------------------------------------------
[40 FR 2338, Jan. 10, 1975, as amended at 60 FR 33963, June 29, 1995]
§ 428.63 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
top
(a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable:
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Oil and grease............................ 0.42 0.15
TSS....................................... 0.80 0.40
pH........................................ (\1\) (\1\)
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Oil and grease............................ 0.42 0.15
TSS....................................... 0.80 0.40
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.
(b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to lead-sheathed hose production, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable, in addition to the limitations set forth by §428.63(a):
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Lead...................................... 0.0017 0.0007
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Lead...................................... 0.0017 0.0007
------------------------------------------------------------------------
(c) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to wet scrubbers, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable, in addition to the limitations set forth by §428.63:
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material
equivalent
)
-----------------------------
TSS....................................... 1.0 0.5
-----------------------------
English
units (lb/
1,000 lb
of raw
material
equivalent
)
-----------------------------
TSS....................................... 1.0 0.5
------------------------------------------------------------------------
§ 428.64 [Reserved]
top
§ 428.65 Standards of performance for new sources.
top
(a) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Oil and grease............................ 0.42 0.15
TSS....................................... 0.80 0.40
pH........................................ (\1\) (\1\)
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Oil and grease............................ 0.42 0.0
TSS....................................... 0.80 0.4
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.
(b) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to lead-sheathed hose production, which may be discharged by a new source subject to the provisions of this subpart, in addition to the limitations set forth by §428.65(a):
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Lead...................................... 0.0017 0.0007
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Lead...................................... 0.0017 0.0007
------------------------------------------------------------------------
§ 428.66 Pretreatment standards for new sources.
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403, in addition to the limitations set forth in paragraphs (a) and (b) of this section.
(a) The following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart:
------------------------------------------------------------------------
Pollutant or pollutant property Pretreatment standard
------------------------------------------------------------------------
pH........................................ No limitation.
TSS....................................... Do.
Oil and grease............................ 100 mg/l daily maximum.
------------------------------------------------------------------------
(b) The following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to lead-sheathed hose production, which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart, in addition to the limitations set forth by §428.66(a):
------------------------------------------------------------------------
Pretreatment standards
-----------------------------
Average of daily
values for
Pollutant or pollutant property Maximum thirty
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Lead...................................... 0.0017 0.0007
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Lead...................................... 0.0017 0.0007
------------------------------------------------------------------------
[40 FR 2338, Jan. 10, 1975, as amended at 60 FR 33963, June 29, 1995]
Subpart G—Large-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory
top
Source: 40 FR 2340, Jan. 10, 1975, unless otherwise noted.
§ 428.70 Applicability; description of the large-sized general molded, extruded, and fabricated rubber plants subcategory.
top
The following provisions of this subpart are applicable to process waste water discharges resulting from the production of molded, extruded, and fabricated rubber products, foam rubber backing, rubber cement-dipped goods, and retreaded tires by large-sized plants. Specifically excluded from the provisions of this subpart are the discharges resulting from the production of latex-based products, tires and inner tubes, and those discharges from textile plants subject to the provisions of part 410 of this chapter.
§ 428.71 Specialized definitions.
top
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in part 401 of this chapter shall apply to this subpart.
(b) The term “raw material” shall mean all natural and synthetic rubber, carbon black, oils, chemical compounds, and fabric used in the manufacture of general molded, extruded, and fabricated rubber products.
(c) The term “raw material equivalent” shall be equal to the raw material usage multiplied by the volume of air scrubbed via wet scrubbers divided by the total volume of air scrubbed.
(d) The term “large-sized plants” shall mean plants which process more than 10,430 kg/day (23,000 lbs/day) of raw materials.
§ 428.72 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
(a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best practicable control technology currently available:
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Oil and grease............................ 0.26 0.093
TSS....................................... 0.50 0.25
pH........................................ (\1\) (\1\)
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Oil and grease............................ 0.26 0.093
TSS....................................... 0.50 0.25
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.
(b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to lead-sheathed hose production, which may be discharged by a point source subject to the provisions of this subpart after application of the best practicable control technology currently available, in addition to the limitations set forth by §428.72(a):
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Lead...................................... 0.0017 0.0007
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Lead...................................... 0.0017 0.0007
------------------------------------------------------------------------
(c) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to wet scrubbers, which may be discharged by a point source subject to the provisions of this subpart after application of the best practicable control technology currently available, in addition to the limitations set forth by §428.72(a):
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material
equivalent
)
-----------------------------
Lead...................................... 5.8 2.9
-----------------------------
English
units (lb/
1,000 lb
of raw
material
equivalent
)
-----------------------------
Lead...................................... 5.8 2.9
------------------------------------------------------------------------
[40 FR 2340, Jan. 10, 1975, as amended at 60 FR 33963, June 29, 1995]
§ 428.73 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
top
(a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable:
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Oil and grease............................ 0.26 0.093
TSS....................................... 0.50 0.25
pH........................................ (\1\) (\1\)
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Oil and grease............................ 0.26 0.093
TSS....................................... 0.50 0.25
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.
(b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to lead-sheathed hose production, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable, in addition to the limitations set forth by §428.73(a):
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Lead...................................... 0.0017 0.0007
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Lead...................................... 0.0017 0.0007
------------------------------------------------------------------------
(c) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to wet scrubbers, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable, in addition to the limitations set forth by §428.73(a):
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material
equivalent
)
-----------------------------
Lead...................................... 1.0 0.5
-----------------------------
English
units (lb/
1,000 lb
of raw
material
equivalent
)
-----------------------------
Lead...................................... 1.0 0.5
------------------------------------------------------------------------
§ 428.74 [Reserved]
top
§ 428.75 Standards of performance for new sources.
top
(a) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Oil and grease............................ 0.26 0.093
TSS....................................... 0.50 0.25
pH........................................ (\1\) (\1\)
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Oil and grease............................ 0.26 0.093
TSS....................................... 0.50 0.25
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.
(b) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to lead-sheathed hose production, which may be discharged by a new source subject to the provisions of this subpart, in addition to the limitations set forth by §428.75(a):
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Lead...................................... 0.0017 0.0007
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Lead...................................... 0.0017 0.0007
------------------------------------------------------------------------
§ 428.76 Pretreatment standards for new sources.
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403, in addition to the limitations set forth in paragraphs (a) and (b) of this section.
(a) The following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart:
------------------------------------------------------------------------
Pollutant or pollutant property Pretreatment standard
------------------------------------------------------------------------
pH........................................ No limitation.
TSS....................................... Do.
Oil and grease............................ 100 mg/l daily maximum.
------------------------------------------------------------------------
(b) The following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section, and attributable to lead-sheathed hose production, which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart, in addition to the limitations set forth by §428.76(a):
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of raw
material)
-----------------------------
Lead...................................... 0.0017 0.0007
-----------------------------
English
units (lb/
1,000 lb
of raw
material)
-----------------------------
Lead...................................... 0.0017 0.0007
------------------------------------------------------------------------
[40 FR 2340, Jan. 10, 1975, as amended at 60 FR 33963, June 29, 1995]
Subpart H—Wet Digestion Reclaimed Rubber Subcategory
top
Source: 40 FR 2341, Jan. 10, 1975, unless otherwise noted.
§ 428.80 Applicability; description of the wet digestion reclaimed rubber subcategory.
top
The provisions of this subpart are applicable to process waste water discharges resulting from the production of reclaimed rubber by use of the wet digestion process.
§ 428.81 Specialized definitions.
top
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in part 401 of this chapter shall apply to this subpart.
§ 428.82 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
top
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Metric
units (kg/
kkg of
product)
-----------------------------
COD....................................... 14.7 6.11
Oil and grease............................ 0.40 0.144
TSS....................................... 1.04 0.52
pH........................................ (\1\) (\1\)
-----------------------------
English
units (lb/
1,000 lb
of
product)
-----------------------------
COD....................................... 14.7 6.11
Oil and grease............................ 0.40 0.144
TSS....................................... 1.04 0.52
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------ (continued)