CCLME.ORG - 40 CFR PART 52—APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS
Loading (50 kb)...'
(continued)

(20) Amendments to Sections .01 (Definitions), .04 (Ambient Air Quality Standards (former Section .05 of Regulations)), 10.03.36 through 10.03.41 (Regulations Governing Control of Air Pollution in the State of Maryland); amendments to Sections .01 (Control and Prohibition of Open Burning), .02 (Control and Prohibition of Particulate Emissions), .03 (Control and Prohibition of Sulfur Oxides, Hydrocarbons and Oxides of Nitrogen Emissions), and .06 (Control and Prohibition of Installations and Operations) of Maryland Regulations 10.03.36, 10.03.37, 10.03.40, and 10.03.41 (Regulations Controlling Air Pollution in the Cumberland-Keyser, Central Maryland, Southern Maryland and Eastern Shore AQCRs); amendments to Section .02 (Control and Prohibition of Visible Emissions), .03 (Control and Prohibition of sulfur oxides, hydrocarbons, and oxides of nitrogen emissions), and .06 (Control and Prohibition of Installations and Operations) of Maryland Regulations 10.03.38 and 10.03.39 (Regulations Controlling Air Pollution in the Metropolitan Baltimore and National Capital AQCRs); submitted on December 11, 1974 by the Governor.

(21) Amendments to Section .11 (Permits) of Maryland Regulation 10.03.35 (Regulations Governing Control of Air Pollution in the State of Maryland); amendments to Section .04 (Control and prohibition of sulfur oxides emissions) of Maryland Regulations 10.03.36, 10.03.37, 10.03.40 and 10.03.41 (Regulations Governing Air Pollution Control in the Cumberland-Keyser, Central Maryland, Southern Maryland and Eastern Shore AQCR's); deletion of Section .03D(1) (Control of particulate matter from grain drying installations) from Maryland Regulations 10.03.36, 10.03.37, 10.03.40 and 10.03.41; deletion of Section .03D (Control of particulate matter from grain drying installations) from Maryland Regulations 10.03.38 and 10.03.39 (Regulations Governing Air Pollution Control in the Metropolitan Baltimore and National Capital AQCR's) submitted by the Governor on July 1, 1975.

(22) A Consent Order for the Chalk Point power plant issued by the Circuit Court for Montgomery County on February 27, 1978.

(23) Amendments to Sections .01 (Definitions), .03 (Air Pollution Episode System), .06 (Test Methods) and .12 (Emission Test Methods); and deletion of Section .08 (Penalties and Plans for Compliance) of Regulation 10.03.35 (Regulations Governing Air Pollution Control in the State of Maryland); amendments to Table 1 (Emission Standards for New Fuel Burning Equipment) of Maryland Regulations 10.03.36 through 10.03.41; amendments to Section .04 (Control and Prohibition of Gas and Vapor Emissions) and .06 (Control and Prohibition of Installations and Operations; and deletion of Section. .03E (Process Weight Requirements) and .07 (Transition from Previous Regulations) of Maryland Regulation 10.03.38 (Regulation Governing Air Pollution Control in the Metropolitan Baltimore AQCR); amendments to Section .01 (Control of Open Fires) and .04 (Control of Gas and Vapor Emissions; and deletion of Sections .03E (Process Weight Requirements) and .07 (Transition from Previous Regulations) of Maryland Regulation 10.03.39 (Regulation Governing Air Pollution Control in the Maryland Portion of the National Capital Interstate AQCR) submitted on February 10, 1977 by the Governor.

(24) Amendments to Maryland Regulation 10.03.35 through 10.03.41 inclusive which supplement the English System measurement with equivalent metric units submitted on February 10, 1977 by the Governor.

(25) Consent Order dated July 28, 1978 between the Potomac Electric Power Company and the Department of Health and Mental Hygiene of the State of Maryland in the Circuit Court for Montgomery County (No. 49352—Equity) submitted on August 8, 1978 by Acting Governor Blair Lee.

(26) Consent Orders for Beall Jr./Sr. High School and Mount St. Mary's College issued by the Secretary of the Maryland Department of Health and Mental Hygiene on January 30, 1979 and March 8, 1979 respectively.

(27) Amendments to Sections .01, .07, and .11 of Maryland Regulation 10.18.01 as submitted on January 19, 1979 by the Governor.

(28) Amendments to Sections .03D, .03F, .03H, .06I of Maryland Regulation 10.18.04 and 10.18.05 as submitted on January 19, 1979 by the Governor.

(29) Variances from Maryland regulations 10.18.04.02(A), 10.18.04.03(B)(3), and 10.18.04.04(B)(1) relating to visible emissions, particulate matter from solid fuel burning equipment and prohibition of usage of fuel with sulfur content in excess of one percent by weight, respectively. The variance request was submitted on October 24, 1979 by the Governor of Maryland.

(30) Consent orders submitted by the Governor on July 16, 1975, November 18, 1977, and by the Administrator, Air Quality Programs on June 15, 1979 granting the Westvaco Corporation an exception to Regulation COMAR 10.18.02.04B.

(31)–(32) [Reserved]

(33) A consent order amending regulation 10.18.07, 10.18.07.02B, 10.18.07.03B(2)a, for the Firestone Plastics Co., Inc., Perryville, Maryland, submitted on December 1, 1978, by the Maryland Environmental Health Administration.

(34) Amendment to Maryland regulations 10.18.05.03(B)(2), 10.18.05.02(A), and 10.18.05.03(B)(1)(a) relating to relaxation of particulate emissions, visible emissions and waiving of particulate control equipment requirement for the Chalk Point Generating Station Unit #3. The amendment, a Secretarial Order, was submitted on August 13, 1979 by the State of Maryland.

(35) Variance from Maryland regulation 10.18.04.02(A) relating to visible emissions and allowing a maximum visible emission of 25% opacity. This variance expires on September 11, 1982. The variance request was submitted on September 27, 1979 by the State of Maryland.

(36) Amendments to Sections .01 (Definitions), .04 (Ambient Air Quality Standards), and .11 (Permits) of Maryland Regulation 10.18.01 (Regulations Governing Control of Air Pollution in the State of Maryland); and amendments to Section .02 (Control and Prohibition of Visible Emissions) of Maryland Regulations 10.18.04 and 10.18.05 (Regulations Governing Air Pollution Control in the Metropolitan Baltimore and National Capital AQCRS's) submitted by the Governor on September 26, 1979.

(37) Amendments to Section .04J(3)a and .04J(3)b (Organic Compounds) of Maryland Regulations 10.18.04 and 10.18.05; submitted on February 10, 1977 by the Governor.

(38) Deletion of Section .06G(2) (Control and Prohibition of Photochemically Reactive Organic Compounds from sources existing on or before February 12, 1974) of Maryland Regulations 10.18.04 and 10.18.05; submitted on December 10, 1979 by the Governor.

(39) Deletion of Sections .06G(1) and .06G(3) (Control and Prohibition of Photochemically Reactive Organic Materials From Sources Built or Modified after February 12, 1974) of Maryland Regulations 10.18.04 and 10.18.05 from the Maryland State Implementation Plan (SIP).

(40) Letter of January 21, 1980 from Maryland to EPA explaining the State's interpretation of the scope of coverage of Maryland Regulation 10.18.04.04J.

(41) Amendments to Sections .06 of Maryland Regulation 10.18.04 and 10.18.05 as submitted on January 19, 1979 by the Governor.

(42) Amendment to Section .01(y) of Maryland Regulation 10.18.01 as submitted on December 10, 1979 by the Governor.

(43) Amendments to Regulations 10.18.04 and 10.18.05; Sections .04J(1)c, .04J(1)d, .04J(1)e(i), .04J(1)f, .04J(1)g, .04J(1)h, .04J(1)i(i), .04J(3)d, .04J(4)a, .04J(4)b, and .04J(5) a through j; submitted on January 19, 1979, and amended on September 26, 1979 by the State of Maryland.

(44) A revision submitted by the State of Maryland on December 20, 1979 which is intended to establish an Ambient Air Quality Monitoring Network.

(45) Recodification of the Maryland Regulations submitted by the State of Maryland on May 22, 1980.

(46) Amendments to section .04D(4) of COMAR 10.18.04 and COMAR 10.18.05 establishing a revised sulfur oxides emissions limitation for all existing solid fuel-fired, cyclone type fuel burning equipment having an actual heat input in excess of 1,000 million Btu/hour; submitted on February 20, 1980 by the Governor.

(47) October 1, 1980 letter from George P. Ferreri, Maryland Office of Environmental Programs to James E. Sydnor, EPA, certifying that the Baltimore Gas & Electric Company's C. P. Crane Generating Station is the sole facility to which COMAR 10.18.04.04D(4) and 10.18.05.04D(4) would apply.

(48) A revision submitted by the State of Maryland on 9/10/80 consisting of a variance issued to the General Refractories Company of Baltimore, Maryland exempting the Company from the “No Visible Emissions” requirements of COMAR 10.18.04.02A for aperiod of three (3) years commencing 9/2/80.

(49) A revision submitted by the State of Maryland on November 3, 1980 consisting of a Consent Agreement (Order) between the State of Maryland and the Maryland Slag Company decreasing the particulate matter emission limitation for the Company.

(50) A revision submitted by the State of Maryland on October 24, 1979 consisting of amendments to the following regulations:


COMAR 10.18.01 as recodified in 40 CFR 52.1070(c)(45), 10.18.02 as recodified in 40 CFR 52.1070(c)(45), 10.18.03 as recodified in 40 CFR 52.1070(c)(45), 10.18.04 as recodified in 40 CFR 52.1070(c)(45), 10.18.05 as recodified in 40 CFR 52.1070(c)(45), 10.18.06 as recodified in 40 CFR 52.1070(c)(45), 10.18.07 as recodified in 40 CFR 52.1070(c)(45).


(51) A revision submitted by the State of Maryland on May 22, 1980, consisting of changes in definitions in sections 10.18.01.01 and revoking of obsolete regulations, COMAR 10.03.38.04 B(4) and 10.03.39.04 B(4).

(52) A revision submitted by the State of Maryland on April 24, 1974, consisting of changes in COMAR 10.03.35.06 A(1) and 10.03.35.06 A(3).

(53) A revision submitted by the State of Maryland on December 10, 1979, consisting of changes in Sections .01 and .11 of COMAR 10.18.01, and in Sections .05 and .07 of COMAR 10.18.02, 10.18.03, 10.18.04, 10.18.05, 10.18.06 and 10.18.07.

(54) A revision submitted by the State of Maryland on October 17, 1980, consisting of an exception to COMAR 10.18.06.02B for the Maryland Cup Corporation.

(55) A revision submitted by the State of Maryland on August 7, 1981 consisting of an exception to COMAR 10.18.09.07A(2)(c) for the Reading-Whitehall Paperboard Company.

(56) A Secretarial order submitted by the State of Maryland on June 23, 1981 consisting of a variance issued to the Potomac Electric Power Company at Dickerson, Maryland exempting the company from the “no visible emissions” requirements of COMAR 10.18.09.05A(2) until five years from the date of approval by EPA.

(57) A Secretarial order submitted by the State of Maryland on July 17, 1981 consisting of a various issued to the American Cyanamid Company, Havre de Grace, Maryland from the “no visible emissions” requirement of COMAR 10.18.06.02B until July 8, 1986.

(58) Amendments to COMAR 10.18.01, 10.18.06, 10.18.08, 10.18.09, 10.18.11, 10.18.12, 10.18.13, 10.18.14, 10.18.21, and Technical Memorandum TM–116 (amended November 1980) as submitted by the Governor on May 18, 1981.

(59) Addition of Maryland Regulation 10.18.06.14 (Control of PSD sources) which incorporates by reference the Federal prevention of significant deterioration (PSD) requirements set forth in 40 CFR 52.21; submitted on June 24, 1981 by the Governor.

(60) A State Implementation Plan for the control of lead (Pb) emissions submitted on October 23, 1980 by the Governor.

(61) A letter containing supplemental clarifying information with respect to the State's control strategy demonstration; submitted on July 27, 1981 by the Maryland Air Management Administration.

(62) A revised Secretarial order controlling lead emissions from the Mobay Chemical Corporation's frit manufacturing plant in Baltimore, Maryland; submitted December 16, 1981 by the Maryland Air Management Administration.

(63) A revision submitted by the State of Maryland on October 8, 1981 detailing a plan for satisfying requirements of sections 121 and 127 of the Clean Air Act Amendments of 1977.

(64) A revision submitted by the State of Maryland on November 18, 1981, consisting of a Modified Amended Consent Order for Potomac Electric Power Company's Chalk Point generating station.

(65) A Secretarial order stating the terms under which a construction permit for a new source in a nonattainment area will be issued by the Northeast Maryland Waste Disposal Authority to Wheelabrator-Frye, Inc. to construct and operate a municipal incinerator; submitted on December 22, 1981 by the Director, Maryland Air Management Administration, Department of Health and Mental Hygiene.

(66) An amendment to Code of Maryland Air Regulation (COMAR) 10.18.08.05A(1) revising the method for calculating particulate emissions from incinerators located in the Cumberland-Keyser, Central Maryland, Southern Maryland and Eastern Shore Air Quality Control Regions (AQCR's), submitted on January 11, 1982 by the Governor.

(67) Code of Maryland Air Regulations (COMAR) 10.18.10 (Control of Iron and Steel Production Installations); Technical Memorandum AMA–TM 81–04: Amendment to AMA–TM 73–116; Amendments to COMAR 10.18.01.01 (General Administrative Regulations—Definitions) and COMAR 10.18.06.02 (General Emission Standards, Prohibitions and Restriction); and a New Amended Plan for Compliance for the Bethlehem Steel Corporation's Sparrows Point, Maryland Plant; submitted on August 11, 1981 by the Governor.

(68) The revised Health-Environmental Article of the Annotated Code of Maryland, submitted on July 2, 1982 by the Director, Maryland Air Management Administration, Department of Health and Mental Hygiene.

(69) A revision submitted by the State of Maryland on November 15, 1982, consisting of an extension to the previous visible emission exception to COMAR 10.18.01.08 (Exception to Visible Emission Requirements) for the Maryland Cup Corporation. The exception is renewed until September 11, 1987.

(70) A modified Secretarial order stating the terms under which a construction permit for a new source in a nonattainment area will be issued to Wheelabrator-Frye, Inc. who will construct, own, and operate a municipal incinerator; submitted on March 17, 1983 by the Director, Maryland Air Management Administration, Department of Health and Mental Hygiene.

(71) Plan Revision, excluding the schedules for additional VOC controls and the required Vehicle Emissions Inspection Program, providing for attainment of the Ozone and Carbon Monoxide Standards, submitted by the State on July 1, 1982 for the Metropolitan Baltimore Intrastate Air Quality Control Region (AQCR) and November 5, 1982 for the Maryland portion of the National Capital Interstate AQCR. On May 4, 1983, and June 13 and 16, 1983, the State submitted amended I/M regulations. A revised schedule for the adoption of controls for VOC sources was submitted on December 23, 1983.

(72) Amendments to Code of Maryland Regulations (COMAR) 10.18.01, .02, .06, .11, .13, and .21 which apply to air quality control areas III and IV, submitted on August 22, 1983.

(73) A revision submitted by the State of Maryland on July 12, 1983, consisting of a plan for Compliance for the J.L. Clark Manufacturing Company in Havre De Grace.

(74) A Consent Order granting the Westvaco Corporation a sulfur dioxide (SO2) emissions limitation which is equivalent to COMAR 10.18.09. 07(A)(1)(a); submitted on September 7, 1983, as amended on February 7, 1984 by the Maryland Air Management Administration.

(75) Revision submitted by the State of Maryland on December 13, 1983 consisting of a Plan for Compliance for the General Motors Corporation, GM Assembly Division, Baltimore City Plant.

(76) Revision submitted by the State of Maryland on December 13, 1983 consisting of a Plan for Compliance for the American Can Company, Baltimore City.

(77) Revision submitted by the State of Maryland on December 13, 1983 consisting of a Plan for Compliance for the National Can Corporation, Baltimore County.

(78) Revision submitted by the State of Maryland on April 6, 1984 consisting of a Plan for Compliance for the Crown Cork and Seal Company, Inc., Baltimore City.

(79) Revision submitted by the State of Maryland on April 6, 1984 consisting of a Plan for Compliance for the Continental Can Company, Baltimore City.

(80) A revision submitted by the State of Maryland on January 26, 1984, and May 25, 1984 consisting of amendments to change the State's stationary source stack testing procedures document and to correct a State procedural defect relating to procedures for observing visible emissions from iron and steel facilities.

(81) [Reserved]

(82) Revisions to the Code of Maryland Regulations (COMAR) were submitted by the Director of the Maryland Air Management Administration of March 14, 1984.

(i) Incorporation by reference. (A) Amendments to COMAR 10.18.02 (Permits, Approvals and Registration) and COMAR 10.18.08 (Control of Incinerators), as published in the Maryland Register on February 3, 1984 (proposed on November 11, 1983).

(ii) Additional material. (A) Letter from the MAMA dated November 29, 1984 clarifying that permit applications would only be accepted from incinerators subject to the hazardous waste facility regulations and that hazardous waste facility permits would be treated as air quality permits for all purposes.

(83) Revisions to the Code of Maryland Regulations (COMAR) were submitted by the Director of the Maryland Air Management Administration on March 14, 1984.

(i) Incorporation by reference.

(A) Amendments to COMAR 10.18.09 (Control of Fuel Burning Equipment and Stationary Internal Combustion Engines), as published in the Maryland Register on March 2, 1984.

(ii) Additional information.

(A) Letter from MAMA dated November 29, 1984 clarifying that a permit cannot be issued for the sources unless they undergo new source review as under COMAR 10.18.02 (Permits, Approvals and Registration).

(84) [Reserved]

(85) Revisions to the Ozone Attainment Plan were submitted by the Director, Maryland Air Management Administration, on August 1, 1984.

(i) Incorporation by reference.

(A) State Secretarial Order for the Monarch Manufacturing Company located in Belcamp, Maryland, allowing interim VOC emission standards to be used by the Company until source-specific regulations are developed by MAMA. The Company shall come into compliance with the source-specific regulations within six months after their adoption. The Secretarial Order was approved on July 23, 1984.

(86) Revisions submitted on March, 1, 1989 by the Secretary, Maryland Department of the Environment, amending the Code of Maryland Air Regulations (COMAR) 10.18.21.10 (Graphic Arts) and COMAR 10.18.21.13 (Miscellaneous Metal Coating, Interior Sheet Drum Lining).

(i) Incorporation by reference.

(A) Revisions to COMAR 10.18.21.10, pertaining to graphic arts, and COMAR 10.18.21.13, pertaining to miscellaneous metal coating, interior sheet drum lining. These revisions were adopted by the Secretary of Health and Mental Hygiene on June 10, 1987and became effective on August 10, 1987.

(ii) Additional information.

(A) Letter of June 30, 1987 from George P. Ferreri, Director, Maryland Air Management Administration, to Thomas J. Maslany, EPA Region III, forwarding revisions to COMAR 10.18.21.10 and COMAR 10.18.21.13.

(B) Letter of March 13, 1989 from George P. Ferreri, Director, Maryland Air Management Administration to Stanley L. Laskowski, Acting Regional Administrator, EPA Region III, clarifying information with respect to the adopted and effective dates of the revisions to COMAR 10.18.21.10 and COMAR 10.18.21.13.

(87) A revision submitted by the Secretary, Maryland Department of Health and Mental Hygiene on March 30, 1987, consisting of amendments to the Good Engineering Practice (GEP) Stack Height Regulations, COMAR 10.18.01.08 (Determination of Ground Level Concentrations—Acceptable Techniques).

(i) Incorporation by reference.

(A) Letter of March 30, 1987 from the Secretary, Maryland Department of Health and Mental Hygiene.

(B) COMAR 10.18.01.08 (Determination of Ground Level Concentrations—Acceptable Techniques), which was adopted by the Maryland Department of Health and Mental Hygiene on January 23, 1987.

(ii) Additional information.

(A) None.

(88) [Reserved]

(89) Revisions to the State Implementation Plan submitted by the Maryland Department of the Environment on June 30, 1987.

(i) Incorporation by reference.

(A) Letter from the Maryland Department of Environment dated June 30, 1987 submitting a revision to the Maryland State Implementation Plan pertaining to the definitions of true vapor pressure and vapor pressure.

(B) Maryland Register Volume 13, page 2048; COMAR 10.18.01.01 Definitions V–1. and X–1 (Now recodified as COMAR 26.11.01.01 Z. and CC.).

(90) Revisions to the State Implementation Plan submitted by the Maryland Department of the Environment on March 21, 1991.

(i) Incorporation by reference.

(A) Letter from the Maryland Department of Environment dated March 21, 1991 submitting a revision to the Maryland State Implementation Plan.

(B) Recodified Maryland Regulations, revised effective August 1, 1988.

(1) COMAR 26.11.01.01A. through J., L., O. through BB., DD. (except for “ammonium carbonates”); COMAR 26.11.01.02 through 26.11.01.09.

(2) COMAR 26.11.02.01 through 26.11.02.03A.(6)(o), 26.11.02.03A.(7) through 26.11.02.09, 26.11.02.10A., 10E., 26.11.02.11A., .11B.(2)–(3), 11C., 26.11.02.12 through 26.11.02.16.

(3) COMAR 26.11.03.01 through 26.11.03.03, 26.11.03.05 through 26.11.03.08.

(4) COMAR 26.11.05—(Entire Chapter).

(5) COMAR 26.11.06.03A.–.03C.; 26.11.06.05, 26.11.06A., .06C., .06D; 26.11.06.10, 26.11.06.11, 26.11.06.15, 26.11.06.16.

(6) COMAR 26.11.07.01 through 26.11.07.04, 26.11.07.05A. (1), (2), 26.11.07.05A.(5) through .05A.(7), 26.11.07.05B (1), (2), (4), (5).

(7) COMAR 26.11.09.01 through 26.11.09.04, 26.11.09.05B., 26.11.09.06 through 26.11.09.09.

(8) COMAR 26.11.10—Entire chapter except for COMAR 26.11.10.03B.(3).

(9) COMAR 26.11.11—Entire chapter except for COMAR 26.11.11.04A(1)–(4).

(10) COMAR 26.11.12—Entire Chapter.

(11) COMAR 26.11.13.01 (definitions of “external floating roof,” “gasoline,” “internal floating roof,” “liquid-mounted seal,” “metallic-type shoe seal,” “rim-mounted secondary seal,” “shoe mounted secondary seal,” “tank truck,” “vapor control system,” “vapor mounted seal”; 26.11.13.02 (except for .02C(3)), 26.11.13.03, 26.11.13.04B., 26.11.13.05.

(12) COMAR 26.11.19.01A., 01B(2), (4), (5), .02A, .02B(1) (except for “low VOC adhesives”), .02B(2), (3), .02C(1), (2), .02D., .02E (except for all references to variables “C” and “D”), .02F(1), (2), (3) (except for “and”); 26.11.19.04 through 26.11.19.10, 26.11.19.13, 26.11.19.14.

(13) COMAR 26.11.20—Entire Chapter except for COMAR 26.11.20.02.

(ii) Additional materials.

(A) Remainder of the March 21, 1991 State Submittal known as Maryland 91–01B.

(91) Revisions to the State Implementation Plan submitted by the Maryland Department of the Environment—Air Management Administration on August 20, 1984, regarding a bubble for American Cyanamid in Havre de Grace, Maryland.

(i) Incorporation by reference.

(A) Letter from the Maryland Department of Health and Mental Hygiene—Air Management Administration (now known as the Maryland Department of the Environment—Air Management Administration) dated August 20, 1984 submitting a revision to the Maryland State Implementation Plan regarding a bubble for American Cyanamid.

(B) Secretarial Order (By Consent) between American Cyanamid and the Maryland State Department of Health and Mental Hygiene—Air Management Administration (now known as the Maryland Department of the Environment—Air Management Administration) except for section 2, approved on August 2, 1984.

(ii) Additional material.

(A) Letter dated September 17, 1984 from Ronald E. Lipinski, MAMA, to James Topsale, EPA Region III, providing emissions information for the sources involved in the American Cyanamid bubble.

(B) Public Hearing record for the May 23, 1984 public hearing.

(C) Technical Support Document, prepared by Maryland, for American Cyanamid, including formulas to calculate bubble emissions.

(92) Revisions to the State Implementation Plan submitted by the Maryland Department of the Environment on December 15, 1987.

(i) Incorporation by reference. (A) Letter from the Maryland Department of Environment dated December 15, 1987 submitting a revision to the Maryland State Implementation Plan.

(B) Amendments to the Code of Maryland Air Regulations (COMAR) 10.18.03, State Adopted National Ambient Air Quality Standards and Guidelines limited to the amendment of 10.18.03.04, carbon monoxide and COMAR 10.18.06, General Emission Standards, Prohibitions, and Restrictions, limited to the amendment of 10.18.06.04, carbon monoxide in areas III and IV. The amendments to COMAR 10.18.03.04 and 10.18.06.04 were adopted by the Maryland Department of the Environment on November 4, 1987, and made effective on January 5, 1988.

(93) Revisions to the State Implementation Plan submitted by the Maryland Department of the Environment on December 30, 1987.

(i) Incorporation by reference.

(A) Letter from the Maryland Department of Environment dated December 15, 1987, submitting revisions to the Maryland State Implementation Plan.

(B) Amendments to regulations 10.18.01 O–1, 10.18.02.03 H(3)(i), and 10.18.06.14 under the Code of Maryland Administrative Regulations (COMAR) revising Maryland's prevention of significant deterioration program to incorporate changes to 40 CFR 52.21 made between 1980 and 1986. The amendments to COMAR 10.18.01 O–1, 10.18.02.03 H(3)(i), and 10.18.06.14 were effective on January 5, 1988 in the State of Maryland.

(ii) Additional materials.

(A) None.

(94) Revisions to the State Implementation Plan submitted by the Maryland Department of the Environment on March 8, 1989.

(i) Incorporation by reference.

(A) Letter from the Maryland Department of Environment dated March 1, 1989, submitting revisions to the Maryland State Implementation Plan.

(B) Amendments to regulations 26.11.01.01, 26.11.02.10 (C)(9), and 26.11.06.14 (proposed as 10.18.01 O–1, 10.18.02.03 H(3)(i), and 10.18.06.14) under the Code of Maryland Administrative Regulations (COMAR) revising Maryland's prevention of significant deterioration program to incorporate changes to 40 CFR 52.21 made between 1986 and 1987, thereby establishing the increment for NO2 and requiring sources to conduct an NO2 increment consumption analysis. The amendments to COMAR 26.11.01.01, 26.11.02.10 (C)(9), and 26.11.06.14 were effective on March 21, 1989 in the State of Maryland.

(ii) Additional materials.

(A) None.

(95) Revisions to the State Implementation Plan submitted by the Maryland Department of the Environment on March 28, 1991.

(i) Incorporation by reference.

(A) Letter from the Maryland Department of Environment dated March 21, 1991 submitting revisions to the Maryland State Implementation Plan.

(B) Amendments to regulations 26.11.01.01 and 26.11.06.14 under the Code of Maryland Administrative Regulations (COMAR) revising Maryland's prevention of significant deterioration program to incorporate changes to 40 CFR 52.21 made between 1987 and 1989. The amendments to COMAR 26.11.01.01, and 26.11.06.14 were effective on March 31, 1991 in the State of Maryland. The amendments to 26.11.02.10 (C)(9) were effective on May 8, 1991 in the State of Maryland.

(ii) Additional materials.

(A) None.

(96) Revisions to the State Implementation Plan submitted by the Maryland Department of the Environment on April 3, 1992.

(i) Incorporation by reference.

(A) Letter from the Maryland Department of Environment dated March 27, 1992 submitting revisions to the Maryland State Implementation Plan.

(B) Amendments to regulations 26.11.01.01 and 26.11.06.14 under the Code of Maryland Administrative Regulations (COMAR) revising Maryland's prevention of significant deterioration program to incorporate changes to 40 CFR 52.21 made between 1989 and 1990. The amendments to COMAR 26.11.01.01 and 26.11.06.14 were effective on February 17, 1992 in the State of Maryland.

(ii) Additional materials.

(A) Remainder of April 3, 1992, State submittal.

(97) Revisions to the State Implementation Plan submitted on June 14, 1989, by the Maryland Department of the Environment:

(i) Incorporation by reference.

(A) Letter of June 14, 1989, from the Maryland Department of the Environment transmitting a revision to a Maryland State Implementation Plan.

(B) Revision to COMAR 26.11.01.01E (Definition of “Control Officer”), effective June 20, 1989.

(ii) Additional material.

(A) Remainder of the June 14, 1989 State submittal.

(98) Revisions to the Maryland State Implementation Plan submitted on April 5, 1991, and amended on January 18, 1993, by the Maryland Department of the Environment:

(i) Incorporation by reference.

(A) Letters of April 5, 1991, and January 18, 1993, from the Maryland Department of the Environment transmitting additions and revisions to Maryland's State Implementation Plan, pertaining to volatile organic compound regulations in Maryland's air quality regulations, Code of Maryland Administrative Regulations (COMAR) 26.11.

(B) The addition of COMAR 26.11.19.15C (proposed as COMAR 10.18.19.15C), Standards for Adhesive Application, adopted by the Secretary of Health and Hygiene on June 10, 1987, effective August 10, 1987;

(C) Amendments to COMAR 26.11.19.15C adopted by the Secretary of the Environment on March 9, 1991, effective May 8, 1991; and

(D) Amendments to COMAR 26.11.19.15C(4) adopted by the Secretary of the Environment on January 18, 1992, effective February 15, 1993.

(ii) Additional material.

(A) Remainder of April 5, 1991, and January 18, 1993, State submittals pertaining to COMAR 26.11.19.15C, Standards for Adhesive Application.

(B) Letter of April 17, 1992, from the Maryland Department of the Environment clarifying the intent of its April 5, 1991, letter transmitting revisions and additions to Maryland's State Implementation Plan.

(C) Letter of July 10, 1992, from the Maryland Department of the Environment clarifying Maryland's intent regarding COMAR 26.11.19.15C(4) and stating that Maryland was working to correct the administrative error in COMAR 26.11.19.15C(4) contained in the April 5, 1991, submittal.

(99) Revisions to the Maryland regulations for particulate matter (PM–10) submitted on March 1, 1989, by the Maryland Department of the Environment:

(i) Incorporation by reference.

(A) Letter of March 1, 1989, from the Department of the Environment transmitting a revision to the Maryland State implementation plan for particulate matter (PM–10) Group III areas.

(B) COMAR 10.18.01 (General Administrative Provisions), COMAR 10.18.02 (Permits, Approvals, and Registration), COMAR 10.18.03 (State-Adopted National Ambient Air Quality Standards and Guidelines), COMAR 10.18.05 (Air Pollution Episode System), and COMAR 10.18.06 (General Emission Standards, Prohibitions, and Restrictions) as published in the Maryland Register on February 10, 1989. The regulations were adopted on January 20, 1989, and became effective on March 21, 1989.

(ii) Additional materials.

(A) Remainder of the State implementation plan revision request submitted by the Maryland Department of the Environment on March 1, 1989.

(100) Revisions to the Code of Maryland Administrative Regulations (COMAR) submitted on June 7, 1990, by the Maryland Department of the Environment:

(i) Incorporation by reference.

(A) Letter of June 7, 1990, from the Maryland Department of the Environment transmitting revisions to the Maryland State Implementation Plan.

(B) The following revised regulations to COMAR 26.11.05 (Air Pollution Episode Plans), effective June 18, 1990: 26.11.05.01A., .01B., .01H., and .01J.; 26.11.05.02B., .02C.; 26.11.05.03A., 03B., 03D.; 26.11.05.05A., 05B., 05C., and .05D. Deletion of the definition “coefficient of haze.”

(ii) Additional material.

(A) Remainder of the June 7, 1990, State submittal.

(101) Revisions to the State of Maryland Regulations Oxygenated Gasoline Program regulations submitted on November 13, 1992, by the Maryland Department of the Environment. Effective date October 26, 1992.

(i) Incorporation by reference.

(A) Letter of November 13, 1992, from the Maryland Department of the Environment transmitting Oxygenated Gasoline Program regulations.

(B) The following State of Maryland regulations effective October 26, 1992:

(1) Amendments to COMAR 26.11.13.01 (Control of Gasoline and Volatile Organic Compound Storage and Handling).

(2) Deletion of Regulation .06 under COMAR 26.11.13 (Control of Gasoline and Volatile Organic Compound Storage and Handling).

(3) New Regulation COMAR 26.11.20.03 (Mobile Sources).

(4) COMAR 03.03.05.01, .01–1, .02–1, .05, .08, and .15 (Motor Fuel Inspection).

(5) COMAR 03.03.06.01 through .06 (Emissions Control Compliance).

(ii) The remainder of the November 13, 1992, submittal.

(102) Revisions to the Maryland State Implementation Plan submitted on April 5, 1991 by the Maryland Department of the Environment:

(i) Incorporation by reference.

(A) Letter of April 5, 1991 from the Maryland Department of the Environment transmitting addition, deletions, and revisions to Maryland's State Implementation Plan, pertaining to volatile organic compound regulations in Maryland's air quality regulations, Code of Maryland Administrative Regulations (COMAR) 26.11.

(B) The following revisions to the provisions of COMAR 26.11, adopted by the Secretary of Health and Hygiene on June 10, 1987, effective August 10, 1987:

(1) Amendments to COMAR 26.11.06.06B (proposed as 10.18.06.06B), pertaining to control of Volatile organic compounds from installations.

(2) Addition of new section COMAR 26.11.06.06E, (proposed as 10.18.06.06E), exemptions.

(3) Amendments to COMAR 26.11.19.01B, (proposed as COMAR 10.18.21.01B), including the addition of the definitions for the terms adhesive and exempt solvent, the renumbering of all definitions.

(4) Amendments to COMAR 26.11.19.02B–F, (proposed as COMAR 10.18.21.02B–F), pertaining to compliance methods, methods of assessing compliance, test methods, computations, and reporting.

(5) Amendments to COMAR 26.11.19.10B, (proposed as COMAR 10.18.21.10B), pertaining to applicability and exemptions for graphic arts sources.

(6) Amendments to COMAR 26.11.19.13, (proposed as COMAR 10.18.21.13), pertaining to miscellaneous metal coating.

(7) Addition of new section COMAR 26.11.19.15A (proposed as 10.18.21.15A), definition of terms.

(8) Addition of new section COMAR 26.11.19.15B (proposed as 10.18.21.15B), standards for paint, resin and adhesive manufacturing.

(C) Amendments to COMAR 26.11.19.12 (proposed as COMAR 10.18.21.12), pertaining to dry cleaning installations, including the addition of new sections E and F, pertaining to equipment specifications, emission standards, and compliance determinations for petroleum solvent dry cleaning installations, adopted by the Secretary of the Environment on April 21, 1989, effective June 20, 1989.

(D) Amendments to COMAR 26.11.19.12B–F, pertaining to applicability, exemptions, equipment specifications, emission standards, and compliance determinations for perchloroethylene and petroleum solvent dry cleaning installations, adopted by the Secretary of the Environment on May 17, 1990, effective July 16, 1990.

(E) The following revisions to the provisions of COMAR 26.11, adopted by the Secretary of the Environment on March 9, 1991, effective May 8, 1991:

(1) Amendments to COMAR 26.11.01.01, including the addition of definitions for the terms actual emissions, allowable emissions, potential to emit, premises, and reasonably available control technology (RACT); deletion of the definition for the term Ringelmann Smoke Chart; amendments to definitions for the terms New Source Impacting on a Non-Attainment Area (NSINA) and volatile organic compound (VOC); and renumbering of all definitions.

(2) Amendments to COMAR 26.11.02.03A(6)(k)(vii), pertaining to permits to construct or modify for motor vehicle gasoline storage tanks.

(3) The addition of new section COMAR 26.11.06.01, definitions for the terms installation and process line.

(4) Amendments to COMAR 26.11.06.06A, B and E, pertaining to applicability, control, and exemptions for sources of volatile organic compounds.

(5) The deletion of existing COMAR 26.11.13, pertaining to gasoline and volatile organic compound storage and handling.

(6) The addition of new COMAR 26.11.13.01, .02, .03, .05, and .06, pertaining to definitions, applicability, and exemptions for gasoline and volatile organic compounds storage and handling, large storage tanks, gasoline leaks from tank trucks, and Reid Vapor Pressure.

(7) Amendments to COMAR 26.11.19.01B, addition of the definition for the term transfer efficiency, amendments to the definition for the term coating.

(8) Amendments to COMAR 26.11.19.02A–F, pertaining to applicability, compliance methods, methods of assessing compliance, test methods, computations, and reporting for volatile organic compound regulations.

(9) Amendments to COMAR 26.11.19.07, the addition of new section B and revisions to new section C (former section B), pertaining to paper, fabric, and vinyl coating.

(10) Amendments to COMAR 26.11.19.10A, the deletion of definitions for the terms high velocity hot-air dryer, letterpress methods, lithographic methods, and roll printing; revisions to the definition for the term web printing; and renumbering of all definitions.

(11) Amendments to COMAR 26.11.19.10B and C, pertaining to graphic arts, including the deletion of existing section C and the addition of new section C.

(12) The addition of new COMAR 26.11.19.11A, B, and C, pertaining to sheet-fed paper and plastic parts coating, including definitions for the terms fountain, letterpress printing, lithographic printing, plastic parts coating, and sheet-fed coating.

(13) Amendments to COMAR 26.11.19.13B and C, pertaining to miscellaneous metal coating.

(14) Amendments to COMAR 26.11.19.14B, pertaining to synthesized pharmaceutical products.

(15) Amendments to COMAR 26.11.19.15A and B, pertaining to paint, resin, and adhesive manufacturing, including revisions to definitions for the terms adhesive application, resin thin down tank, specialty footwear manufacturing, specialty spiral tube winding, spiral tube winding, and spiral wound tube impregnating and curing, the deletion of the definition for the term honeycomb core installation, and the renumbering of all definitions.

(ii) Additional material.

(A) Remainder of April 5, 1991 State submittal pertaining to COMAR 26.11.01.01, 26.11.02.03, 26.11.06.01, 26.11.06.06A, B and E, 26.11.13.01, 26.11.13.02, 26.11.13.03, 26.11.13.05, 26.11.13.06, 26.11.19.01B, 26.11.19.02A–F, 26.11.19.07, 26.11.19.10, 26.11.19.11A–C, 26.11.19.12, 26.11.19.13, 26.11.19.14B, and 26.11.19.15A and B.

(B) Letter of April 17, 1992 from the Maryland Department of the Environment clarifying the intent of its April 5, 1991 letter transmitting additions, deletions, and revisions to Maryland's State Implementation Plan.

(C) Letter of October 18, 1993 from the Maryland Department of the Environment formally withdrawing revisions to COMAR 26.11.19.11D and E, pertaining to lithographic printing, from consideration as revisions to Maryland's State Implementation Plan.

(103) Revisions to the Maryland State Implementation Plan submitted on September 20, 1991 by the Maryland Department of the Environment:

(i) Incorporation by reference.

(A) Letter of September 20, 1991 from the Maryland Department of the Environment transmitting addition, deletions, and revisions to Maryland's State Implementation Plan, pertaining to volatile organic compound regulations in Maryland's air quality regulations, Code of Maryland Administrative Regulations (COMAR) 26.11.

(B) The following revisions to the provisions of COMAR 26.11, adopted by the Secretary of the Environment on July 24, 1991, effective August 19, 1991:

(1) Amendments to COMAR 26.11.01.01DD, the definition for the term volatile organic compound.

(2) Amendments to COMAR 26.11.01.04C, pertaining to emission test methods, including the addition of a: reference to 40 CFR part 60; and Methods 1000, 1002, and 1003 and Appendixes A and B, contained in “Technical Memorandum 91–01, Test Methods and Equipment Specifications for Stationary Sources” (January 1991).

(3) Amendments to COMAR 26.11.13.02(C)(2), pertaining to exemptions for large storage tanks.

(4) Amendments to COMAR 26.11.19.02D(2), pertaining to test methods.

(5) Amendments to COMAR 26.11.19.07A, including amendments to the definition for the term paper coating, and the addition of definitions for the terms sheet-fed paper coating and ultraviolet curable coating, and the renumbering of definitions.

(6) Addition of new COMAR 26.11.19.07D, pertaining to sheet-fed paper coating.

(7) Addition of new COMAR 26.11.19.11B(2), and amendments to COMAR 26.11.19.11C, pertaining to plastic coating.

(8) Amendments to COMAR 26.11.19.12F(3) and (4), pertaining to compliance determinations for petroleum solvent dry cleaning installations.

(9) Addition of new COMAR 26.11.19.16, pertaining to volatile organic compound equipment leaks.

(ii) Additional material.

(A) Remainder of the September 20, 1991 State submittal pertaining to COMAR 26.11.01.01DD, COMAR 26.11.01.04C, Appendixes A and B and Methods 1000, 1002, and 1003 contained in “Technical Memorandum 91–01, Test Methods and Equipment Specifications for Stationary Sources” (January 1991), COMAR 26.11.13.02(C)(2), COMAR 26.11.19.02D(2), COMAR 26.11.19.07A, COMAR 26.11.19.07D, COMAR 26.11.19.11B(2) and C, COMAR 26.11.19.12F(3) and (4), and COMAR 26.11.19.16.

(104) Revisions to the Maryland State Implementation Plan submitted on April 2, 1992 by the Maryland Department of the Environment:

(i) Incorporation by reference.

(A) Letter of April 2, 1992 from the Maryland Department of the Environment transmitting addition, deletions, and revisions to Maryland's State Implementation Plan, pertaining to volatile organic compound regulations in Maryland's air quality regulations, Code of Maryland Administrative Regulations (COMAR) 26.11.

(B) The following revisions to the provisions of COMAR 26.11, adopted by the Secretary of the Environment on January 20, 1992, effective February 17, 1992:

(1) Amendments to COMAR 26.1.01.01DD, the definition for the term volatile organic compound.

(2) Amendments to COMAR 26.11.01.04C, pertaining to emission test methods, including the addition of Methods 1006, 1007, and 1008 contained in Supplement 1 (July 1, 1991) to “Technical Memorandum 91–01, Test Methods and Equipment Specifications for Stationary Sources” (January 1991), and revisions to Method 1000 and Appendixes A and B contained in Supplement 1.

(3) Amendments to COMAR 26.11.19.02D, pertaining to test methods for coatings and adhesives containing volatile organic compounds.

(4) Amendments to COMAR 26.11.19.09B, pertaining to emission standards for volatile organic compound metal cleaning.

(5) Amendments to COMAR 26.11.19.12F(3) and (4), pertaining to compliance determinations for petroleum solvent dry cleaning installations.

(ii) Additional material.

(A) Remainder of the April 2, 1992 State submittal pertaining to COMAR 26.11.01.01DD, COMAR 26.11.01.04C, Appendixes A and B and Methods 1002, 1006, 1007, and 1008 contained in Supplement 1 (July 1, 1991) to “Technical Memorandum 91–01, Test Methods and Equipment Specifications for Stationary Sources” (January 1991), COMAR 26.11.19.02D, COMAR 26.11.19.09B, and COMAR 26.11.19.12F(3) and (4).

(105) Revisions to the Maryland State Implementation Plan submitted on January 18, 1993 by the Maryland Department of the Environment:

(i) Incorporation by reference.

(A) Letter of January 18, 1993 from the Maryland Department of the Environment transmitting addition, deletions, and revisions to Maryland's State Implementation Plan, pertaining to volatile organic compound regulations in Maryland's air quality regulations, Code of Maryland Administrative Regulations (COMAR) 26.11.

(B) The following revisions to the provisions of COMAR 26.11, adopted by the Secretary of the Environment on January 18, 1993, effective February 15, 1993:

(1) Amendments to COMAR 26.11.01.04C, pertaining to emission test methods, including the addition of Methods 1009, 1011, and 1012 contained in Supplement 2 (July 1, 1992) to “Technical Memorandum 91–01, Test Methods and Equipment Specifications for Stationary Sources” (January 1991), and revisions to Method 1003 and Appendix B contained in Supplement 2.

(2) Amendments to COMAR 26.11.13.05B(2) and C(2), pertaining to compliance determinations for tank trucks.

(3) Amendments to COMAR 26.11.19.07A(4), the definition for the term ultraviolet curable coating.

(ii) Additional material.

(A) Remainder of the January 18, 1993 State submittal pertaining to COMAR 26.11.01.04C, Appendix B and Methods 1003, 1009, 1011, and 1012 contained in Supplement 2 (July 1, 1992) to “Technical Memorandum 91–01, Test Methods and Equipment Specifications for Stationary Sources (January 1991), COMAR 26.11.13.05B(2) and C(2), and COMAR 26.11.19.07A(4).

(106) Revisions to the Maryland Regulations submitted on September 18, 1991 by the Maryland Department of the Environment.

(i) Incorporation by reference.

(A) Letter of September 18, 1991 from the Maryland Department of the Environment transmitting the continuous emission monitoring revision.

(B) Definition amendments to Code of Maryland Administrative Regulations (COMAR) 26.11.01.01, excluding paragraph E–1, and new regulations COMAR 26.11.01.10 Continuous Emission Monitoring Requirements, concerning continuous opacity monitoring, effective July 22, 1991.

(ii) Additional materials.

(A) Remainder of September 23, 1991 State submittal.

(107) Revisions to the Maryland State Implementation Plan submitted on January 18, 1993, by the Maryland Department of the Environment:

(i) Incorporation by reference.

(A) Letter of January 18, 1993, from the Maryland Department of the Environment transmitting additions to Maryland's State Implementation Plan, pertaining to volatile organic compound regulations in Maryland's air quality regulations, Code of Maryland Administrative Regulations (COMAR) 26.11.

(B) The addition of COMAR 26.11.24, Stage II Vapor Recovery at Gasoline Dispensing Facilities, adopted by the Secretary of the Environment on January 18, 1993, effective February 15, 1993.

(ii) Additional material.

(A) Remainder of the January 18, 1993, State submittal pertaining to COMAR 26.11.24, Stage II Vapor Recovery at Gasoline Dispensing Facilities.

(108) Revisions to the Code of Maryland Administrative Regulations (COMAR) submitted on March 30, 1987 by the Maryland Department of Health and Mental Hygiene:

(i) Incorporation by reference.

(A) Letter of March 30, 1987 from the Maryland Department of Health and Mental Hygiene transmitting revisions to the Maryland State Implementation Plan (SIP).

(B) Revised COMAR 10.18.02.03H. (Action on an Application for a Permit and for Approval of a PSD Source or NSINA) (currently COMAR 26.11.02.10C.), effective March 24, 1987.

(ii) Additional material.

(A) Remainder of the March 30, 1987 State submittal pertaining to COMAR 10.18.02.03H. (currently COMAR 26.11.02.10C.).

(109) Revisions to the State of Maryland Regulations State Implementation Plan submitted on November 13, 1992 by the Maryland Department of the Environment:

(i) Incorporation by reference.

(A) Letter of November 13, 1992 from Maryland Department of the Environment transmitting a revised regulation to require major sources of volatile organic compounds and oxides of nitrogen, Statewide, to certify their emissions annually.

(B) Revisions to Title 26, COMAR 26.11.01, specifically to amend regulation .01, and to add regulation .05–1. Effective on December 7, 1992.

(ii) Additional material.

(A) Remainder of December 7, 1992 State submittal.

(110) Revisions to the Maryland State Implementation Plan submitted on April 5, 1991 by the Maryland Department of the Environment:

(i) Incorporation by reference.

(A) Letter of April 5, 1991 from the Maryland Department of the Environment transmitting additions, deletions, and revisions to Maryland's State Implementation Plan, pertaining to volatile organic compound regulations in Maryland's air quality regulations, Code of Maryland Administrative Regulations (COMAR) 26.11.

(B) The addition of COMAR 26.11.13.04, pertaining to loading operations, adopted by the Secretary of the Environment on March 9, 1991, effective May 8, 1991.

(ii) Additional material.

(A) Remainder of April 5, 1991 State submittal pertaining to COMAR 26.11.13.04, loading operations.

(111) Revisions to the Maryland State Implementation Plan submitted on April 2, 1992 by the Maryland Department of the Environment:

(i) Incorporation by reference.

(A) Letter of April 2, 1992 from the Maryland Department of the Environment transmitting additions, deletions, and revisions to Maryland's State Implementation Plan, pertaining to volatile organic compound regulations in Maryland's air quality regulations, COMAR 26.11. (continued)