CCLME.ORG - 40 CFR PART 426—GLASS MANUFACTURING POINT SOURCE CATEGORY
Loading (50 kb)...'
(continued) e of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Fluoride.................................. 26.0 13.0
------------------------------------------------------------------------


[44 FR 50747, Aug. 29, 1979, as amended at 51 FR 25001, July 9, 1986]

§ 426.134 [Reserved]
top
§ 426.135 Standards of performance for new sources.
top
The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:

(a) Any plant which melts raw materials, produces hand pressed or blown leaded glassware, discharges greater than 50 gallons per day of process waste water, and employs hydrofluoric acid finishing techniques shall meet the following limitations.



------------------------------------------------------------------------
Effluent limitations (mg/l)
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Lead...................................... 0.2 0.1
Fluoride.................................. 26.0 13.0
TSS....................................... 20.0 10.0
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.


(b) Any plant which melts raw materials, produces non-leaded hand pressed or blown glassware, discharges greater than 50 gallons per day of process waste water, and employs hydrofluoric acid finishing techniques shall meet the following limitations.



------------------------------------------------------------------------
Effluent limitations (mg/l)
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
Fluoride.................................. 26.0 13.0
TSS....................................... 20.0 10.0
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.


(c) Any plant which melts raw materials, produces leaded or non-leaded hand pressed or blown glassware, discharges greater than 50 gallons per day of process waste water, and does not employ hydrofluoric acid finishing techniques shall meet the following limitations.



------------------------------------------------------------------------
Effluent limitations (mg/l)
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
TSS....................................... 20.0 10.0
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.


§ 426.136 Pretreatment standards for new sources.
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart.



------------------------------------------------------------------------
Pretreatment standards (mg/
l)
-----------------------------
Average of daily
Pollutant or pollutant property Maximum values for 30
for any 1 consecutive days
day shall not
exceed_
------------------------------------------------------------------------
(a):
Fluoride.................................. 26.0 13.0
Lead...................................... (\1\) (\1\)
TSS....................................... (\1\) (\1\)
pH........................................ (\1\) (\1\)
(b):
Fluoride.................................. 26.0 13.0
Lead...................................... (\1\) (\1\)
TSS....................................... (\1\) (\1\)
pH........................................ (\1\) (\1\)
(c):
TSS....................................... (\1\) (\1\)
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ No limitation.


[40 FR 2960, Jan. 16, 1975, as amended at 60 FR 33960, June 29, 1995]

§ 426.137 [Reserved]