Loading (50 kb)...'
(continued)
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
§ 410.47 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved]
top
Subpart E—Knit Fabric Finishing Subcategory
top
§ 410.50 Applicability; description of the knit fabric finishing subcategory.
top
The provisions of this subpart are applicable to process wastewater discharges resulting from the following types of textile mills: knit fabric finishers, which may include any or all of the following unit operations: Bleaching, mercerizing, dyeing, printing, resin treatment, water proofing, flame proofing, soil repellency application and a special finish application.
§ 410.51 Specialized definitions.
top
In addition to the definitions set forth in 40 CFR part 401 and §410.01 of this part, the following definitions apply to this subpart:
(a) The term simple manufacturing operation shall mean all the following unit processes: desizing, fiber preparation and dyeing.
(b) The term complex manufacturing operation shall mean “simple” unit processes (desizing, fiber preparation and dyeing) plus any additional manufacturing operations such as printing, water proofing, or applying stain resistance or other functional fabric finishes.
(c) For NSPS (§410.55) the term hosiery products shall mean the internal subdivision of the knit fabric finishing subcategory for facilities that are engaged primarily in dyeing or finishing hosiery of any type.
§ 410.52 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).
top
(a) Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
------------------------------------------------------------------------
BPT limitations
---------------------------
Average of
Pollutant or pollutant property daily values
Maximum for for 30
any 1 day consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb) of
product
---------------------------
BOD5........................................ 5.0 2.5
COD......................................... 60.0 30.0
TSS......................................... 21.8 10.9
Sulfide..................................... 0.20 0.10
Phenols..................................... 0.10 0.05
Total chromium.............................. 0.10 0.05
pH.......................................... (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0 at all times.
(b) Except as provided in paragraph (d) of this section for commission finishing operations, the following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to the finishing of knit fabrics through simple manufacturing operations employing a natural and synthetic fiber or through complex manufacturing operations employing a synthetic fiber, which may be discharged by a point source subject to the provisions of this subpart, in addition to the discharge allowed by paragraph (a) of this section.
------------------------------------------------------------------------
BPT limitations
-------------------------
Average of
daily
Pollutant or pollutant property Maximum for values for
any 1 day 30
consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb)
of product
-------------------------
COD........................................... 20.0 10.0
------------------------------------------------------------------------
(c) Except as provided in paragraph (d) of this section for commission finishing operations, the following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to the finishing of knit fabrics through complex manufacturing operations employing a natural and synthetic fiber blend, which may be discharged by a point source subject to the provisions of this subpart, in addition to the discharge allowed by paragraph (a) of this section.
------------------------------------------------------------------------
BPT limitations
-------------------------
Average of
daily
Pollutant or pollutant property Maximum for values for
any 1 day 30
consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb)
of product
-------------------------
COD........................................... 40.0 20.0
------------------------------------------------------------------------
(d) Additional allocations equal to the effluent limitations established in paragraphs (a), (b), and (c) of this section are allowed any existing point source subject to such effluent limitations that finishes knit fabrics through “commission finishing” as defined in §410.01.
[47 FR 38819, Sept. 2, 1982, as amended at 48 FR 39624, Sept. 1, 1983]
§ 410.53 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).
top
(a) Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT):
------------------------------------------------------------------------
BAT limitations
---------------------------
Average of
Pollutant or pollutant property daily values
Maximum for for 30
any 1 day consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb) of
product
---------------------------
COD......................................... 60.0 30.0
Sulfide..................................... 0.20 0.10
Phenols..................................... 0.10 0.05
Total Chromium.............................. 0.10 0.05
------------------------------------------------------------------------
(b) Except as provided in paragraph (d) of this section for commission finishing operations, the following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to the finishing of knit fabrics through simple manufacturing operations employing a natural and synthetic fiber or through complex manufacturing operations employing a synthetic fiber, which may be discharged by a point source subject to the provisions of this subpart, in addition to the discharge allowed by paragraph (a) of this section.
------------------------------------------------------------------------
BAT limitations
-------------------------
Average of
daily
Pollutant or pollutant property Maximum for values for
any 1 day 30
consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb)
of product
-------------------------
COD........................................... 20.0 10.0
------------------------------------------------------------------------
(c) Except as provided in paragraph (d) of this section for commission finishing operations, the following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to the finishing of knit fabrics through complex manufacturing operations employing a natural and synthetic fiber blend, which may be discharged by a point source subject to the provisions of this subpart, in addition to the discharge allowed by paragraph (a) of this section.
------------------------------------------------------------------------
BAT limitations
---------------------------
Average of
Pollutant or pollutant property daily values
Maximum for for 30
any 1 day consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb) of
product
---------------------------
COD......................................... 40.0 20.0
------------------------------------------------------------------------
(d) Additional allocations equal to the effluent limitations established in paragraphs (a), (b), and (c) of this section are allowed any existing point source subject to such effluent limitations that finishes knit fabrics through “commission finishing” as defined in §410.01.
[47 FR 38819, Sept. 2, 1982, as amended at 48 FR 39624, Sept. 1, 1983]
§ 410.54 Pretreatment standards for existing sources (PSES).
top
Any existing source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
§ 410.55 New source performance standards (NSPS).
top
Any new source subject to this subpart must achieve the following new source performance standards (NSPS):
Simple Manufacturing Operations
------------------------------------------------------------------------
NSPS
---------------------------
Average of
Pollutant or pollutant property daily values
Maximum for for 30
any 1 day consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb) of
product
---------------------------
BOD5........................................ 3.6 1.9
COD......................................... 48.1 31.0
TSS......................................... 13.2 5.9
Sulfide..................................... 0.20 0.10
Phenols..................................... 0.10 0.05
Total chromium.............................. 0.10 0.05
pH.......................................... (\1\) (\1\)
------------------------------------------------------------------------
1 Within the range 6.0 to 9.0 at all times.
Note: Additional allocations for ``commission finishers'' are not
available to new sources.
Complex Manufacturing Operations
------------------------------------------------------------------------
NSPS
---------------------------
Average of
Pollutant or pollutant property daily values
Maximum for for 30
any 1 day consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb) of
product
---------------------------
BOD5........................................ 4.8 2.5
COD......................................... 51.0 32.9
TSS......................................... 12.2 5.4
Sulfide..................................... 0.20 0.10
Phenols..................................... 0.10 0.05
Total Chromium.............................. 0.10 0.05
pH.......................................... (\1\-) (\1\-)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0 at all times.
Note: Additional allocations for ``commission finishers'' are not
available to new sources.
Hosiery Products
------------------------------------------------------------------------
NSPS
---------------------------
Average of
Pollutant or pollutant property daily values
Maximum for for 30
any 1 day consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb) of
product
---------------------------
BOD5........................................ 2.3 1.2
COD......................................... 30.7 19.8
TSS......................................... 8.4 3.7
Sulfide..................................... 0.20 0.10
Phenols..................................... 0.10 0.05
Total Chromium.............................. 0.10 0.05
pH.......................................... (\1\-) (\1\-)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0 at all times.
Note: Additional allocations for ``commission finishers'' are not
available to new sources.
§ 410.56 Pretreatment standards for new sources (PSNS).
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
§ 410.57 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved]
top
Subpart F—Carpet Finishing Subcategory
top
§ 410.60 Applicability; description of the carpet finishing subcategory.
top
The provisions of this subpart are applicable to process wastewater discharges resulting from the following types of textile mills: carpet mills, which may include any or all of the following unit operations: Bleaching, scouring, carbonizing, fulling, dyeing, printing, resin treatment, waterproofing, flameproofing, soil repellency, looping, and backing with foamed and unfoamed latex and jute. Carpet backing without other carpet manufacturing operations is included in subpart C.
§ 410.61 Specialized definitions.
top
In addition to the definitions set forth in 40 CFR part 401 and §410.01 of this part, the following definitions apply to this subpart:
(a) The term product shall mean the final carpet produced or processed including the primary backing but excluding the secondary backing.
(b) The term simple manufacturing operation shall mean the following unit processes: fiber preparation and dyeing with or without carpet backing.
(c) The term complex manufacturing operation shall mean “simple” unit processes (fiber preparation, dyeing and carpet backing) plus any additional manufacturing operations such as printing or dyeing and printing.
§ 410.62 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).
top
(a) Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
------------------------------------------------------------------------
BPT limitations
---------------------------
Average of
Pollutant or pollutant property daily values
Maximum for for 30
any 1 day consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb) of
product
---------------------------
BOD5........................................ 7.8 3.9
COD......................................... 70.2 35.1
TSS......................................... 11.0 5.5
Sulfide..................................... 0.08 0.04
Phenol...................................... 0.04 0.02
Total Chromium.............................. 0.04 0.02
pH.......................................... (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0 at all times.
(b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to the manufacture of carpets through complex manufacturing operations, which may be discharged by a point source subject to the provisions of this subpart, in addition to the discharge allowed by paragraph (a) of this section.
------------------------------------------------------------------------
BPT limitations
-------------------------
Average of
daily
Pollutant or pollutant property Maximum for values for
any 1 day 30
consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb)
of product
-------------------------
COD........................................... 20.0 10.0
------------------------------------------------------------------------
§ 410.63 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).
top
(a) Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following efflluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT):
------------------------------------------------------------------------
BAT limitations
---------------------------
Average of
Pollutant or pollutant property daily values
Maximum for for 30
any 1 day consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb) of
product
---------------------------
COD......................................... 70.2 35.1
Sulfide..................................... 0.08 0.04
Phenols..................................... 0.04 0.02
Total chromium.............................. 0.04 0.02
------------------------------------------------------------------------
(b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to the manufacture of carpets through complex manufacturing operations, which may be discharged by a point source subject to the provisions of this subpart, in addition to the discharge allowed by paragraph (a) of this section.
------------------------------------------------------------------------
BAT limitations
-------------------------
Average of
daily
Pollutant or pollutant property Maximum for values for
any 1 day 30
consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb)
of product
-------------------------
COD........................................... 20.0 10.0
------------------------------------------------------------------------
§ 410.64 Pretreatment standards for existing sources (PSES).
top
Any existing source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
§ 410.65 New source performance standards (NSPS).
top
Any new source subject to this subject must achieve the following new source performance standards (NSPS):
------------------------------------------------------------------------
NSPS limitations
---------------------------
Average of
Pollutant or pollutant property daily values
Maximum for for 30
any 1 day consecutive
days
------------------------------------------------------------------------
kg/kkg (or
pounds per
1,000 lb) of
product
---------------------------
BOD5........................................ 4.6 2.4
COD......................................... 26.6 17.1
TSS......................................... 8.6 3.8
Sulfide..................................... 0.08 0.04
Phenols..................................... 0.04 0.02
Total chromium.............................. 0.04 0.02
pH.......................................... (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0 at all times.
Note: Additional allocations for ``commission finishers'' are not
available to new sources.
§ 410.66 Pretreatment standards for new sources (PSNS).
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
§ 410.67 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved]
top
Subpart G—Stock and Yarn Finishing Subcategory
top
§ 410.70 Applicability; description of the stock and yarn finishing subcategory.
top
The provisions of this subpart are applicable to process wastewater discharges resulting from the following types of textile mills: Stock or yarn dyeing or finishing, which may include any or all of the following unit operations and processes: Cleaning, scouring, bleaching, mercerizing, dyeing and special finishing.
§ 410.71 Specialized definitions. [Reserved]
top
§ 410.72 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).
top
(a) Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
------------------------------------------------------------------------
BPT limitations
---------------------------
Average of
Pollutant or pollutant property daily values
Maximum for for 30
any 1 day consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb) of
product
---------------------------
BOD5........................................ 6.8 3.4
COD......................................... 84.6 42.3
TSS......................................... 17.4 8.7
Sulfide..................................... 0.24 0.12
Phenol...................................... 0.12 0.06
Total chromium.............................. 0.12 0.06
pH.......................................... (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0 at all times.
(b) [Reserved]
§ 410.73 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).
top
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT):
------------------------------------------------------------------------
BAT limitations
---------------------------
Average of
Pollutant or pollutant property daily values
Maximum for for 30
any 1 day consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb) of
product
---------------------------
COD......................................... 84.6 42.3
Sulfide..................................... 0.24 0.12
Phenols..................................... 0.12 0.06
Total chromium.............................. 0.12 0.06
------------------------------------------------------------------------
§ 410.74 Pretreatment standards for existing sources (PSES).
top
Any existing source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
§ 410.75 New source performance standards (NSPS).
top
Any new source subject to this subpart must achieve the following new source performance standards (NSPS):
------------------------------------------------------------------------
NSPS
---------------------------
Average of
Pollutant or pollutant property daily values
Maximum for for 30
any 1 day consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb) of
product
---------------------------
BOD5........................................ 3.6 1.9
COD......................................... 33.9 21.9
TSS......................................... 9.8 4.4
Sulfide..................................... 0.24 0.12
Phenols..................................... 0.12 0.06
Total chromium.............................. 0.12 0.06
pH.......................................... (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0 at all times.
Note: Additional allocations for ``commission finishers'' are not
available to new sources.
§ 410.76 Pretreatment standards for new sources (PSNS).
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
§ 410.77 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved]
top
Subpart H—Nonwoven Manufacturing Subcategory
top
§ 410.80 Applicability; description of the nonwoven manufacturing subcategory.
top
The provisions of this subpart are applicable to process wastewater discharges resulting from facilities that primarily manufacture nonwoven textile products of wool, cotton, or synthetics, singly or as blends, by mechanical, thermal, and/or adhesive bonding procedures. Nonwoven products produced by fulling and felting processes are covered in subpart I—Felted Fabric Processing.
§ 410.81 Specialized definitions. [Reserved]
top
§ 410.82 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).
top
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
------------------------------------------------------------------------
BPT limitations
---------------------------
Average of
Pollutant or pollutant property daily values
Maximum for for 30
any 1 day consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb) of
product
---------------------------
BOD5........................................ 4.4 2.2
COD......................................... 40.0 20.0
TSS......................................... 6.2 3.1
Sulfide..................................... 0.046 0.023
Phenol...................................... 0.023 0.011
Total chromium.............................. 0.023 0.011
pH.......................................... (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0 at all times.
§ 410.83 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).
top
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT):
------------------------------------------------------------------------
BAT limitations
---------------------------
Average of
Pollutant or pollutant property daily values
Maximum for for 30
any 1 day consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb) of
product
---------------------------
COD......................................... 40.0 20.0
Sulfide..................................... 0.046 0.023
Phenols..................................... 0.023 0.011
Total chromium.............................. 0.023 0.011
------------------------------------------------------------------------
§ 410.84 Pretreatment standards for existing sources (PSES).
top
Any existing source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
§ 410.85 New source performance standards (NSPS).
top
Any new source subject to this subpart must achieve the following new source performance standards (NSPS):
------------------------------------------------------------------------
NSPS
---------------------------
Average of
Pollutant or pollutant property daily values
Maximum for for 30
any 1 day consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb) of
product
---------------------------
BOD5........................................ 2.6 1.4
COD......................................... 15.2 9.8
TSS......................................... 4.9 2.2
Sulfide..................................... 0.046 0.023
Phenols..................................... 0.023 0.011
Total Chromium.............................. 0.023 0.011
pH.......................................... (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0 at all times.
Note: Additional allocations for ``commission finishers'' are not
available to new sources.
§ 410.86 Pretreatment standards for new sources (PSNS).
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
§ 410.87 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved]
top
Subpart I—Felted Fabric Processing Subcategory
top
§ 410.90 Applicability; description of the felted fabric processing subcategory.
top
The provisions of this subpart are applicable to process wastewater discharges resulting from facilities that primarily manufacture nonwoven products by employing fulling and felting operations as a means of achieving fiber bonding.
§ 410.91 Specialized definitions. [Reserved]
top
§ 410.92 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).
top
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
------------------------------------------------------------------------
BPT limitations
---------------------------
Average of
Pollutant or pollutant property daily values
Maximum for for 30
any 1 day consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb) of
product
---------------------------
BOD5........................................ 35.2 17.6
COD......................................... 256.8 128.4
TSS......................................... 55.4 27.7
Sulfide..................................... 0.44 0.22
Phenol...................................... 0.22 0.11
Total chromium.............................. 0.22 0.11
pH.......................................... (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.
§ 410.93 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).
top
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT):
------------------------------------------------------------------------
BAT limitations
---------------------------
Average of
Pollutant or pollutant property daily values
Maximum for for 30
any 1 day consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb) of
product
---------------------------
COD......................................... 256.8 128.4
Sulfide..................................... 0.44 0.22
Phenols..................................... 0.22 0.11
Total Chromium.............................. 0.22 0.11
------------------------------------------------------------------------
§ 410.94 Pretreatment standards for existing sources (PSES).
top
Any existing source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
§ 410.95 New source performance standards (NSPS).
top
Any new source subject to this subpart must achieve the following new source performance standards (NSPS):
------------------------------------------------------------------------
NSPS
---------------------------
Average of
Pollutant or pollutant property daily values
Maximum for for 30
any 1 day consecutive
days
------------------------------------------------------------------------
Kg/kkg (or
pounds per
1,000 lb) of
product
---------------------------
BOD5........................................ 16.9 8.7
COD......................................... 179.3 115.5
TSS......................................... 50.9 22.7
Sulfide..................................... 0.44 0.22
Phenols..................................... 0.22 0.11
Total Chromium.............................. 0.22 0.11
pH.......................................... (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range of 6.0 to 9.0 at all times.
Note: Additional allocations for ``commission finishers'' are not
available to new sources.
§ 410.96 Pretreatment standards for new sources (PSNS).
top
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
§ 410.97 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved] (continued)