Loading (50 kb)...'
(continued)
production of titanium
dioxide using the
chloride-ilmenite
process.
Pesticides:
K031......................... By-product salts (T)
generated in the
production of MSMA and
cacodylic acid.
K032......................... Wastewater treatment (T)
sludge from the
production of chlordane.
K033......................... Wastewater and scrub (T)
water from the
chlorination of
cyclopentadiene in the
production of chlordane.
K034......................... Filter solids from the (T)
filtration of
hexachlorocyclopentadien
e in the production of
chlordane.
K035......................... Wastewater treatment (T)
sludges generated in the
production of creosote.
K036......................... Still bottoms from (T)
toluene reclamation
distillation in the
production of disulfoton.
K037......................... Wastewater treatment (T)
sludges from the
production of disulfoton.
K038......................... Wastewater from the (T)
washing and stripping of
phorate production.
K039......................... Filter cake from the (T)
filtration of
diethylphosphorodithioic
acid in the production
of phorate.
K040......................... Wastewater treatment (T)
sludge from the
production of phorate.
K041......................... Wastewater treatment (T)
sludge from the
production of toxaphene.
K042......................... Heavy ends or (T)
distillation residues
from the distillation of
tetrachlorobenzene in
the production of 2,4,5-
T.
K043......................... 2,6-Dichlorophenol waste (T)
from the production of
2,4-D.
K097......................... Vacuum stripper discharge (T)
from the chlordane
chlorinator in the
production of chlordane.
K098......................... Untreated process (T)
wastewater from the
production of toxaphene.
K099......................... Untreated wastewater from (T)
the production of 2,4-D.
K123......................... Process wastewater (T)
(including supernates,
filtrates, and
washwaters) from the
production of
ethylenebisdithiocarbami
c acid and its salt.
K124......................... Reactor vent scrubber (C, T)
water from the
production of
ethylenebisdithiocarbami
c acid and its salts.
K125......................... Filtration, evaporation, (T)
and centrifugation
solids from the
production of
ethylenebisdithiocarbami
c acid and its salts.
K126......................... Baghouse dust and floor (T)
sweepings in milling and
packaging operations
from the production or
formulation of
ethylenebisdithiocarbami
c acid and its salts.
K131......................... Wastewater from the (C, T)
reactor and spent
sulfuric acid from the
acid dryer from the
production of methyl
bromide.
K132......................... Spent absorbent and (T)
wastewater separator
solids from the
production of methyl
bromide.
Explosives:
K044......................... Wastewater treatment (R)
sludges from the
manufacturing and
processing of explosives.
K045......................... Spent carbon from the (R)
treatment of wastewater
containing explosives.
K046......................... Wastewater treatment (T)
sludges from the
manufacturing,
formulation and loading
of lead-based initiating
compounds.
K047......................... Pink/red water from TNT (R)
operations.
Petroleum refining:
K048......................... Dissolved air flotation (T)
(DAF) float from the
petroleum refining
industry.
K049......................... Slop oil emulsion solids (T)
from the petroleum
refining industry.
K050......................... Heat exchanger bundle (T)
cleaning sludge from the
petroleum refining
industry.
K051......................... API separator sludge from (T)
the petroleum refining
industry.
K052......................... Tank bottoms (leaded) (T)
from the petroleum
refining industry.
K169......................... Crude oil storage tank (T)
sediment from petroleum
refining operations.
K170......................... Clarified slurry oil tank (T)
sediment and/or in-line
filter/separation solids
from petroleum refining
operations.
K171......................... Spent Hydrotreating (I,T)
catalyst from petroleum
refining operations,
including guard beds
used to desulfurize
feeds to other catalytic
reactors (this listing
does not include inert
support media).
K172......................... Spent Hydrorefining (I,T)
catalyst from petroleum
refining operations,
including guard beds
used to desulfurize
feeds to other catalytic
reactors (this listing
does not include inert
support media).
Iron and steel:
K061......................... Emission control dust/ (T)
sludge from the primary
production of steel in
electric furnaces.
K062......................... Spent pickle liquor (C,T)
generated by steel
finishing operations of
facilities within the
iron and steel industry
(SIC Codes 331 and 332).
Primary copper:
Primary lead:
Primary zinc:
Primary aluminum:
K088......................... Spent potliners from (T)
primary aluminum
reduction.
Ferroalloys:
Secondary lead:
K069......................... Emission control dust/ (T)
sludge from secondary
lead smelting. (Note:
This listing is stayed
administratively for
sludge generated from
secondary acid scrubber
systems. The stay will
remain in effect until
further administrative
action is taken. If EPA
takes further action
effecting this stay, EPA
will publish a notice of
the action in the
Federal Register.
K100......................... Waste leaching solution (T)
from acid leaching of
emission control dust/
sludge from secondary
lead smelting.
Veterinary pharmaceuticals:
K084......................... Wastewater treatment (T)
sludges generated during
the production of
veterinary
pharmaceuticals from
arsenic or organo-
arsenic compounds.
K101......................... Distillation tar residues (T)
from the distillation of
aniline-based compounds
in the production of
veterinary
pharmaceuticals from
arsenic or organo-
arsenic compounds.
K102......................... Residue from the use of (T)
activated carbon for
decolorization in the
production of veterinary
pharmaceuticals from
arsenic or organo-
arsenic compounds.
Ink formulation:
K086......................... Solvent washes and (T)
sludges, caustic washes
and sludges, or water
washes and sludges from
cleaning tubs and
equipment used in the
formulation of ink from
pigments, driers, soaps,
and stabilizers
containing chromium and
lead.
Coking:
K060......................... Ammonia still lime sludge (T)
from coking operations.
K087......................... Decanter tank tar sludge (T)
from coking operations.
K141......................... Process residues from the (T)
recovery of coal tar,
including, but not
limited to, collecting
sump residues from the
production of coke from
coal or the recovery of
coke by-products
produced from coal. This
listing does not include
K087 (decanter tank tar
sludges from coking
operations).
K142......................... Tar storage tank residues (T)
from the production of
coke from coal or from
the recovery of coke by-
products produced from
coal.
K143......................... Process residues from the (T)
recovery of light oil,
including, but not
limited to, those
generated in stills,
decanters, and wash oil
recovery units from the
recovery of coke by-
products produced from
coal.
K144......................... Wastewater sump residues (T)
from light oil refining,
including, but not
limited to, intercepting
or contamination sump
sludges from the
recovery of coke by-
products produced from
coal.
K145......................... Residues from naphthalene (T)
collection and recovery
operations from the
recovery of coke by-
products produced from
coal.
K147......................... Tar storage tank residues (T)
from coal tar refining.
K148......................... Residues from coal tar (T)
distillation, including
but not limited to,
still bottoms.
------------------------------------------------------------------------
(b) Listing Specific Definitions: (1) For the purposes of the K181 listing, dyes and/or pigments production is defined to include manufacture of the following product classes: dyes, pigments, or FDA certified colors that are classified as azo, triarylmethane, perylene or anthraquinone classes. Azo products include azo, monoazo, diazo, triazo, polyazo, azoic, benzidine, and pyrazolone products. Triarylmethane products include both triarylmethane and triphenylmethane products. Wastes that are not generated at a dyes and/or pigments manufacturing site, such as wastes from the offsite use, formulation, and packaging of dyes and/or pigments, are not included in the K181 listing.
(c) K181 Listing Levels. Nonwastewaters containing constituents in amounts equal to or exceeding the following levels during any calendar year are subject to the K181 listing, unless the conditions in the K181 listing are met.
------------------------------------------------------------------------
Chemical Mass
Constituent abstracts levels
No. (kg/yr)
------------------------------------------------------------------------
Aniline........................................... 62-53-3 9,300
o-Anisidine....................................... 90-04-0 110
4-Chloroaniline................................... 106-47-8 4,800
p-Cresidine....................................... 120-71-8 660
2,4-Dimethylaniline............................... 95-68-1 100
1,2-Phenylenediamine.............................. 95-54-5 710
1,3-Phenylenediamine.............................. 108-45-2 1,200
------------------------------------------------------------------------
(d) Procedures for demonstrating that dyes and/or pigment nonwastewaters are not K181. The procedures described in paragraphs (d)(1)–(d)(3) and (d)(5) of this section establish when nonwastewaters from the production of dyes/pigments would not be hazardous (these procedures apply to wastes that are not disposed in landfill units or treated in combustion units as specified in paragraph (a) of this section). If the nonwastewaters are disposed in landfill units or treated in combustion units as described in paragraph (a) of this section, then the nonwastewaters are not hazardous. In order to demonstrate that it is meeting the landfill disposal or combustion conditions contained in the K181 listing description, the generator must maintain documentation as described in paragraph (d)(4) of this section.
(1) Determination based on no K181 constituents. Generators that have knowledge (e.g., knowledge of constituents in wastes based on prior sampling and analysis data and/or information about raw materials used, production processes used, and reaction and degradation products formed) that their wastes contain none of the K181 constituents (see paragraph (c) of this section) can use their knowledge to determine that their waste is not K181. The generator must document the basis for all such determinations on an annual basis and keep each annual documentation for three years.
(2) Determination for generated quantities of 1,000 MT/yr or less for wastes that contain K181 constituents. If the total annual quantity of dyes and/or pigment nonwastewaters generated is 1,000 metric tons or less, the generator can use knowledge of the wastes (e.g., knowledge of constituents in wastes based on prior analytical data and/or information about raw materials used, production processes used, and reaction and degradation products formed) to conclude that annual mass loadings for the K181 constituents are below the listing levels of paragraph (c) of this section. To make this determination, the generator must:
(i) Each year document the basis for determining that the annual quantity of nonwastewaters expected to be generated will be less than 1,000 metric tons.
(ii) Track the actual quantity of nonwastewaters generated from January 1 through December 31 of each year. If, at any time within the year, the actual waste quantity exceeds 1,000 metric tons, the generator must comply with the requirements of paragraph (d)(3) of this section for the remainder of the year.
(iii) Keep a running total of the K181 constituent mass loadings over the course of the calendar year.
(iv) Keep the following records on site for the three most recent calendar years in which the hazardous waste determinations are made:
(A) The quantity of dyes and/or pigment nonwastewaters generated.
(B) The relevant process information used.
(C) The calculations performed to determine annual total mass loadings for each K181 constituent in the nonwastewaters during the year.
(3) Determination for generated quantities greater than 1,000 MT/yr for wastes that contain K181 constituents. If the total annual quantity of dyes and/or pigment nonwastewaters generated is greater than 1,000 metric tons, the generator must perform all of the steps described in paragraphs ((d)(3)(i)–(d)(3)(xi) of this section) in order to make a determination that its waste is not K181.
(i) Determine which K181 constituents (see paragraph (c) of this section) are reasonably expected to be present in the wastes based on knowledge of the wastes (e.g., based on prior sampling and analysis data and/or information about raw materials used, production processes used, and reaction and degradation products formed).
(ii) If 1,2-phenylenediamine is present in the wastes, the generator can use either knowledge or sampling and analysis procedures to determine the level of this constituent in the wastes. For determinations based on use of knowledge, the generator must comply with the procedures for using knowledge described in paragraph (d)(2) of this section and keep the records described in paragraph (d)(2)(iv) of this section. For determinations based on sampling and analysis, the generator must comply with the sampling and analysis and recordkeeping requirements described below in this section.
(iii) Develop a waste sampling and analysis plan (or modify an existing plan) to collect and analyze representative waste samples for the K181 constituents reasonably expected to be present in the wastes. At a minimum, the plan must include:
(A) A discussion of the number of samples needed to characterize the wastes fully;
(B) The planned sample collection method to obtain representative waste samples;
(C) A discussion of how the sampling plan accounts for potential temporal and spatial variability of the wastes.
(D) A detailed description of the test methods to be used, including sample preparation, clean up (if necessary), and determinative methods.
(iv) Collect and analyze samples in accordance with the waste sampling and analysis plan.
(A) The sampling and analysis must be unbiased, precise, and representative of the wastes.
(B) The analytical measurements must be sufficiently sensitive, accurate and precise to support any claim that the constituent mass loadings are below the listing levels of paragraph (c) of this section.
(v) Record the analytical results.
(vi) Record the waste quantity represented by the sampling and analysis results.
(vii) Calculate constituent-specific mass loadings (product of concentrations and waste quantity).
(viii) Keep a running total of the K181 constituent mass loadings over the course of the calendar year.
(ix) Determine whether the mass of any of the K181 constituents listed in paragraph (c) of this section generated between January 1 and December 31 of any year is below the K181 listing levels.
(x) Keep the following records on site for the three most recent calendar years in which the hazardous waste determinations are made:
(A) The sampling and analysis plan.
(B) The sampling and analysis results (including QA/QC data)
(C) The quantity of dyes and/or pigment nonwastewaters generated.
(D) The calculations performed to determine annual mass loadings.
(xi) Nonhazardous waste determinations must be conducted annually to verify that the wastes remain nonhazardous.
(A) The annual testing requirements are suspended after three consecutive successful annual demonstrations that the wastes are nonhazardous. The generator can then use knowledge of the wastes to support subsequent annual determinations.
(B) The annual testing requirements are reinstated if the manufacturing or waste treatment processes generating the wastes are significantly altered, resulting in an increase of the potential for the wastes to exceed the listing levels.
(C) If the annual testing requirements are suspended, the generator must keep records of the process knowledge information used to support a nonhazardous determination. If testing is reinstated, a description of the process change must be retained.
(4) Recordkeeping for the landfill disposal and combustion exemptions. For the purposes of meeting the landfill disposal and combustion condition set out in the K181 listing description, the generator must maintain on site for three years documentation demonstrating that each shipment of waste was received by a landfill unit that is subject to or meets the landfill design standards set out in the listing description, or was treated in combustion units as specified in the listing description.
(5) Waste holding and handling. During the interim period, from the point of generation to completion of the hazardous waste determination, the generator is responsible for storing the wastes appropriately. If the wastes are determined to be hazardous and the generator has not complied with the subtitle C requirements during the interim period, the generator could be subject to an enforcement action for improper management.
[46 FR 4618, Jan. 16, 1981]
Editorial Note: For Federal Register citations affecting §261.32, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and on GPO Access.
§ 261.33 Discarded commercial chemical products, off-specification species, container residues, and spill residues thereof.
top
The following materials or items are hazardous wastes if and when they are discarded or intended to be discarded as described in §261.2(a)(2)(i), when they are mixed with waste oil or used oil or other material and applied to the land for dust suppression or road treatment, when they are otherwise applied to the land in lieu of their original intended use or when they are contained in products that are applied to the land in lieu of their original intended use, or when, in lieu of their original intended use, they are produced for use as (or as a component of) a fuel, distributed for use as a fuel, or burned as a fuel.
(a) Any commercial chemical product, or manufacturing chemical intermediate having the generic name listed in paragraph (e) or (f) of this section.
(b) Any off-specification commercial chemical product or manufacturing chemical intermediate which, if it met specifications, would have the generic name listed in paragraph (e) or (f) of this section.
(c) Any residue remaining in a container or in an inner liner removed from a container that has held any commercial chemical product or manufacturing chemical intermediate having the generic name listed in paragraphs (e) or (f) of this section, unless the container is empty as defined in §261.7(b) of this chapter.
[Comment: Unless the residue is being beneficially used or reused, or legitimately recycled or reclaimed; or being accumulated, stored, transported or treated prior to such use, re-use, recycling or reclamation, EPA considers the residue to be intended for discard, and thus, a hazardous waste. An example of a legitimate re-use of the residue would be where the residue remains in the container and the container is used to hold the same commercial chemical product or manufacturing chemical intermediate it previously held. An example of the discard of the residue would be where the drum is sent to a drum reconditioner who reconditions the drum but discards the residue.]
(d) Any residue or contaminated soil, water or other debris resulting from the cleanup of a spill into or on any land or water of any commercial chemical product or manufacturing chemical intermediate having the generic name listed in paragraph (e) or (f) of this section, or any residue or contaminated soil, water or other debris resulting from the cleanup of a spill, into or on any land or water, of any off-specification chemical product and manufacturing chemical intermediate which, if it met specifications, would have the generic name listed in paragraph (e) or (f) of this section.
[Comment: The phrase “commercial chemical product or manufacturing chemical intermediate having the generic name listed in . . .” refers to a chemical substance which is manufactured or formulated for commercial or manufacturing use which consists of the commercially pure grade of the chemical, any technical grades of the chemical that are produced or marketed, and all formulations in which the chemical is the sole active ingredient. It does not refer to a material, such as a manufacturing process waste, that contains any of the substances listed in paragraph (e) or (f). Where a manufacturing process waste is deemed to be a hazardous waste because it contains a substance listed in paragraph (e) or (f), such waste will be listed in either §261.31 or §261.32 or will be identified as a hazardous waste by the characteristics set forth in subpart C of this part.]
(e) The commercial chemical products, manufacturing chemical intermediates or off-specification commercial chemical products or manufacturing chemical intermediates referred to in paragraphs (a) through (d) of this section, are identified as acute hazardous wastes (H) and are subject to be the small quantity exclusion defined in §261.5(e).
[Comment: For the convenience of the regulated community the primary hazardous properties of these materials have been indicated by the letters T (Toxicity), and R (Reactivity). Absence of a letter indicates that the compound only is listed for acute toxicity.]
These wastes and their corresponding EPA Hazardous Waste Numbers are:
------------------------------------------------------------------------
Chemical
Hazardous waste abstracts Substance
No. No.
------------------------------------------------------------------------
P023 107-20-0 Acetaldehyde, chloro-
P002 591-08-2 Acetamide, N-(aminothioxomethyl)-
P057 640-19-7 Acetamide, 2-fluoro-
P058 62-74-8 Acetic acid, fluoro-, sodium salt
P002 591-08-2 1-Acetyl-2-thiourea
P003 107-02-8 Acrolein
P070 116-06-3 Aldicarb
P203 1646-88-4 Aldicarb sulfone.
P004 309-00-2 Aldrin
P005 107-18-6 Allyl alcohol
P006 20859-73-8 Aluminum phosphide (R,T)
P007 2763-96-4 5-(Aminomethyl)-3-isoxazolol
P008 504-24-5 4-Aminopyridine
P009 131-74-8 Ammonium picrate (R)
P119 7803-55-6 Ammonium vanadate
P099 506-61-6 Argentate(1-), bis(cyano-C)-,
potassium
P010 7778-39-4 Arsenic acid H3 AsO4
P012 1327-53-3 Arsenic oxide As2 O3
P011 1303-28-2 Arsenic oxide As2 O5
P011 1303-28-2 Arsenic pentoxide
P012 1327-53-3 Arsenic trioxide
P038 692-42-2 Arsine, diethyl-
P036 696-28-6 Arsonous dichloride, phenyl-
P054 151-56-4 Aziridine
P067 75-55-8 Aziridine, 2-methyl-
P013 542-62-1 Barium cyanide
P024 106-47-8 Benzenamine, 4-chloro-
P077 100-01-6 Benzenamine, 4-nitro-
P028 100-44-7 Benzene, (chloromethyl)-
P042 51-43-4 1,2-Benzenediol, 4-[1-hydroxy-2-
(methylamino)ethyl]-, (R)-
P046 122-09-8 Benzeneethanamine, alpha,alpha-
dimethyl-
P014 108-98-5 Benzenethiol
P127 1563-66-2 7-Benzofuranol, 2,3-dihydro-2,2-
dimethyl-, methylcarbamate.
P188 57-64-7 Benzoic acid, 2-hydroxy-, compd. with
(3aS-cis)-1,2,3,3a,8,8a-hexahydro-
1,3a,8-trimethylpyrrolo[2,3-b]indol-5-
yl methylcarbamate ester (1:1).
P001 \1\ 81-81-2 2H-1-Benzopyran-2-one, 4-hydroxy-3-(3-
oxo-1-phenylbutyl)-, & salts,
when present at concentrations
greater than 0.3%
P028 100-44-7 Benzyl chloride
P015 7440-41-7 Beryllium powder
P017 598-31-2 Bromoacetone
P018 357-57-3 Brucine
P045 39196-18-4 2-Butanone, 3,3-dimethyl-1-
(methylthio)-,
O-[methylamino)carbonyl] oxime
P021 592-01-8 Calcium cyanide
P021 592-01-8 Calcium cyanide Ca(CN)2
P189 55285-14-8 Carbamic acid, [(dibutylamino)-
thio]methyl-, 2,3-dihydro-2,2-
dimethyl- 7-benzofuranyl ester.
P191 644-64-4 Carbamic acid, dimethyl-, 1-[(dimethyl-
amino)carbonyl]- 5-methyl-1H- pyrazol-
3-yl ester.
P192 119-38-0 Carbamic acid, dimethyl-, 3-methyl-1-
(1-methylethyl)-1H- pyrazol-5-yl
ester.
P190 1129-41-5 Carbamic acid, methyl-, 3-methylphenyl
ester.
P127 1563-66-2 Carbofuran.
P022 75-15-0 Carbon disulfide
P095 75-44-5 Carbonic dichloride
P189 55285-14-8 Carbosulfan.
P023 107-20-0 Chloroacetaldehyde
P024 106-47-8 p-Chloroaniline
P026 5344-82-1 1-(o-Chlorophenyl)thiourea
P027 542-76-7 3-Chloropropionitrile
P029 544-92-3 Copper cyanide
P029 544-92-3 Copper cyanide Cu(CN)
P202 64-00-6 m-Cumenyl methylcarbamate.
P030 ............ Cyanides (soluble cyanide salts), not
otherwise specified
P031 460-19-5 Cyanogen
P033 506-77-4 Cyanogen chloride
P033 506-77-4 Cyanogen chloride (CN)Cl
P034 131-89-5 2-Cyclohexyl-4,6-dinitrophenol
P016 542-88-1 Dichloromethyl ether
P036 696-28-6 Dichlorophenylarsine
P037 60-57-1 Dieldrin
P038 692-42-2 Diethylarsine
P041 311-45-5 Diethyl-p-nitrophenyl phosphate
P040 297-97-2 O,O-Diethyl O-pyrazinyl
phosphorothioate
P043 55-91-4 Diisopropylfluorophosphate (DFP)
P004 309-00-2 1,4,5,8-Dimethanonaphthalene,
1,2,3,4,10,10-hexa- chloro-
1,4,4a,5,8,8a,-hexahydro-,
(1alpha,4alpha,4abeta,5alpha,8alpha,8
abeta)-
P060 465-73-6 1,4,5,8-Dimethanonaphthalene,
1,2,3,4,10,10-hexa- chloro-
1,4,4a,5,8,8a-hexahydro-,
(1alpha,4alpha,4abeta,5beta,8beta,8ab
eta)-
P037 60-57-1 2,7:3,6-Dimethanonaphth[2,3-b]oxirene,
3,4,5,6,9,9-hexachloro-
1a,2,2a,3,6,6a,7,7a-octahydro-,
(1aalpha,2beta,2aalpha,3beta,6beta,6a
alpha,7beta, 7aalpha)-
P051 \1\ 72-20-8 2,7:3,6-Dimethanonaphth [2,3-
b]oxirene, 3,4,5,6,9,9-hexachloro-
1a,2,2a,3,6,6a,7,7a-octahydro-,
(1aalpha,2beta,2abeta,3alpha,6alpha,6
abeta,7beta, 7aalpha)-, &
metabolites
P044 60-51-5 Dimethoate
P046 122-09-8 alpha,alpha-Dimethylphenethylamine
P191 644-64-4 Dimetilan.
P047 \1\ 534-52-1 4,6-Dinitro-o-cresol, & salts
P048 51-28-5 2,4-Dinitrophenol
P020 88-85-7 Dinoseb
P085 152-16-9 Diphosphoramide, octamethyl-
P111 107-49-3 Diphosphoric acid, tetraethyl ester
P039 298-04-4 Disulfoton
P049 541-53-7 Dithiobiuret
P185 26419-73-8 1,3-Dithiolane-2-carboxaldehyde, 2,4-
dimethyl-, O- [(methylamino)-
carbonyl]oxime.
P050 115-29-7 Endosulfan
P088 145-73-3 Endothall
P051 72-20-8 Endrin
P051 72-20-8 Endrin, & metabolites
P042 51-43-4 Epinephrine
P031 460-19-5 Ethanedinitrile
P194 23135-22-0 Ethanimidothioc acid, 2-
(dimethylamino)-N-[[(methylamino)
carbonyl]oxy]-2-oxo-, methyl ester.
P066 16752-77-5 Ethanimidothioic acid,
N-[[(methylamino)carbonyl]oxy]-,
methyl ester
P101 107-12-0 Ethyl cyanide
P054 151-56-4 Ethyleneimine
P097 52-85-7 Famphur
P056 7782-41-4 Fluorine
P057 640-19-7 Fluoroacetamide
P058 62-74-8 Fluoroacetic acid, sodium salt
P198 23422-53-9 Formetanate hydrochloride.
P197 17702-57-7 Formparanate.
P065 628-86-4 Fulminic acid, mercury(2+) salt (R,T)
P059 76-44-8 Heptachlor
P062 757-58-4 Hexaethyl tetraphosphate
P116 79-19-6 Hydrazinecarbothioamide
P068 60-34-4 Hydrazine, methyl-
P063 74-90-8 Hydrocyanic acid
P063 74-90-8 Hydrogen cyanide
P096 7803-51-2 Hydrogen phosphide
P060 465-73-6 Isodrin
P192 119-38-0 Isolan.
P202 64-00-6 3-Isopropylphenyl N-methylcarbamate.
P007 2763-96-4 3(2H)-Isoxazolone, 5-(aminomethyl)-
P196 15339-36-3 Manganese,
bis(dimethylcarbamodithioato-
S,S[prime])-,
P196 15339-36-3 Manganese dimethyldithiocarbamate.
P092 62-38-4 Mercury, (acetato-O)phenyl-
P065 628-86-4 Mercury fulminate (R,T)
P082 62-75-9 Methanamine, N-methyl-N-nitroso-
P064 624-83-9 Methane, isocyanato-
P016 542-88-1 Methane, oxybis[chloro-
P112 509-14-8 Methane, tetranitro- (R)
P118 75-70-7 Methanethiol, trichloro-
P198 23422-53-9 Methanimidamide, N,N-dimethyl-N[prime]-
[3-[[(methylamino)-
carbonyl]oxy]phenyl]-,
monohydrochloride.
P197 17702-57-7 Methanimidamide, N,N-dimethyl-N[prime]-
[2-methyl-4-
[[(methylamino)carbonyl]oxy]phenyl]-
P050 115-29-7 6,9-Methano-2,4,3-benzodioxathiepin,
6,7,8,9,10,10-
hexachloro-1,5,5a,6,9,9a-hexahydro-,
3-oxide
P059 76-44-8 4,7-Methano-1H-indene, 1,4,5,6,7,8,8-
heptachloro-
3a,4,7,7a-tetrahydro-
P199 2032-65-7 Methiocarb.
P066 16752-77-5 Methomyl
P068 60-34-4 Methyl hydrazine
P064 624-83-9 Methyl isocyanate
P069 75-86-5 2-Methyllactonitrile
P071 298-00-0 Methyl parathion
P190 1129-41-5 Metolcarb.
P128 315-8-4 Mexacarbate.
P072 86-88-4 alpha-Naphthylthiourea
P073 13463-39-3 Nickel carbonyl
P073 13463-39-3 Nickel carbonyl Ni(CO)4, (T-4)-
P074 557-19-7 Nickel cyanide
P074 557-19-7 Nickel cynaide Ni(CN)2
P075 \1\ 54-11-5 Nicotine, & salts
P076 10102-43-9 Nitric oxide
P077 100-01-6 p-Nitroaniline
P078 10102-44-0 Nitrogen dioxide
P076 10102-43-9 Nitrogen oxide NO
P078 10102-44-0 Nitrogen oxide NO2
P081 55-63-0 Nitroglycerine (R)
P082 62-75-9 N-Nitrosodimethylamine
P084 4549-40-0 N-Nitrosomethylvinylamine
P085 152-16-9 Octamethylpyrophosphoramide
P087 20816-12-0 Osmium oxide OsO4, (T-4)-
P087 20816-12-0 Osmium tetroxide
P088 145-73-3 7-Oxabicyclo[2.2.1]heptane-2,3-
dicarboxylic acid
P194 23135-22-0 Oxamyl.
P089 56-38-2 Parathion
P034 131-89-5 Phenol, 2-cyclohexyl-4,6-dinitro-
P048 51-28-5 Phenol, 2,4-dinitro-
P047 \1\ 534-52-1 Phenol, 2-methyl-4,6-dinitro-, &
salts
P020 88-85-7 Phenol, 2-(1-methylpropyl)-4,6-dinitro-
P009 131-74-8 Phenol, 2,4,6-trinitro-, ammonium salt
(R)
P128 315-18-4 Phenol, 4-(dimethylamino)-3,5-dimethyl-
, methylcarbamate (ester).
P199 2032-65-7 Phenol, (3,5-dimethyl-4-(methylthio)-,
methylcarbamate
P202 64-00-6 Phenol, 3-(1-methylethyl)-, methyl
carbamate.
P201 2631-37-0 Phenol, 3-methyl-5-(1-methylethyl)-,
methyl carbamate.
P092 62-38-4 Phenylmercury acetate
P093 103-85-5 Phenylthiourea
P094 298-02-2 Phorate
P095 75-44-5 Phosgene
P096 7803-51-2 Phosphine
P041 311-45-5 Phosphoric acid, diethyl 4-nitrophenyl
ester
P039 298-04-4 Phosphorodithioic acid, O,O-diethyl
S-[2-(ethylthio)ethyl] ester
P094 298-02-2 Phosphorodithioic acid, O,O-diethyl
S-[(ethylthio)methyl] ester
P044 60-51-5 Phosphorodithioic acid, O,O-dimethyl S-
[2-(methylamino)-2-oxoethyl] ester
P043 55-91-4 Phosphorofluoridic acid, bis(1-
methylethyl) ester
P089 56-38-2 Phosphorothioic acid, O,O-diethyl O-(4-
nitrophenyl) ester
P040 297-97-2 Phosphorothioic acid, O,O-diethyl O-
pyrazinyl ester
P097 52-85-7 Phosphorothioic acid,
O-[4-[(dimethylamino)sulfonyl]phenyl]
O,O-dimethyl ester
P071 298-00-0 Phosphorothioic acid, O,O,-dimethyl O-
(4-nitrophenyl) ester
P204 57-47-6 Physostigmine.
P188 57-64-7 Physostigmine salicylate.
P110 78-00-2 Plumbane, tetraethyl-
P098 151-50-8 Potassium cyanide
P098 151-50-8 Potassium cyanide K(CN)
P099 506-61-6 Potassium silver cyanide
P201 2631-37-0 Promecarb
P070 116-06-3 Propanal, 2-methyl-2-(methylthio)-,
O-[(methylamino)carbonyl]oxime
P203 1646-88-4 Propanal, 2-methyl-2-(methyl-sulfonyl)-
, O-[(methylamino)carbonyl] oxime.
P101 107-12-0 Propanenitrile
P027 542-76-7 Propanenitrile, 3-chloro-
P069 75-86-5 Propanenitrile, 2-hydroxy-2-methyl-
P081 55-63-0 1,2,3-Propanetriol, trinitrate (R)
P017 598-31-2 2-Propanone, 1-bromo-
P102 107-19-7 Propargyl alcohol
P003 107-02-8 2-Propenal
P005 107-18-6 2-Propen-1-ol
P067 75-55-8 1,2-Propylenimine
P102 107-19-7 2-Propyn-1-ol
P008 504-24-5 4-Pyridinamine
P075 \1\ 54-11-5 Pyridine, 3-(1-methyl-2-pyrrolidinyl)-
, (S)-, & salts
P204 57-47-6 Pyrrolo[2,3-b]indol-5-ol,
1,2,3,3a,8,8a-hexahydro-1,3a,8-
trimethyl-,
methylcarbamate (ester), (3aS-cis)-.
P114 12039-52-0 Selenious acid, dithallium(1+) salt
P103 630-10-4 Selenourea
P104 506-64-9 Silver cyanide
P104 506-64-9 Silver cyanide Ag(CN)
P105 26628-22-8 Sodium azide
P106 143-33-9 Sodium cyanide
P106 143-33-9 Sodium cyanide Na(CN)
P108 \1\ 57-24-9 Strychnidin-10-one, & salts
P018 357-57-3 Strychnidin-10-one, 2,3-dimethoxy-
P108 \1\ 57-24-9 Strychnine, & salts
P115 7446-18-6 Sulfuric acid, dithallium(1+) salt
P109 3689-24-5 Tetraethyldithiopyrophosphate
P110 78-00-2 Tetraethyl lead
P111 107-49-3 Tetraethyl pyrophosphate
P112 509-14-8 Tetranitromethane (R)
P062 757-58-4 Tetraphosphoric acid, hexaethyl ester
P113 1314-32-5 Thallic oxide
P113 1314-32-5 Thallium oxide Tl2 O3
P114 12039-52-0 Thallium(I) selenite
P115 7446-18-6 Thallium(I) sulfate
P109 3689-24-5 Thiodiphosphoric acid, tetraethyl
ester
P045 39196-18-4 Thiofanox
P049 541-53-7 Thioimidodicarbonic diamide [(H2
N)C(S)]2 NH
P014 108-98-5 Thiophenol
P116 79-19-6 Thiosemicarbazide
P026 5344-82-1 Thiourea, (2-chlorophenyl)-
P072 86-88-4 Thiourea, 1-naphthalenyl-
P093 103-85-5 Thiourea, phenyl-
P185 26419-73-8 Tirpate.
P123 8001-35-2 Toxaphene
P118 75-70-7 Trichloromethanethiol
P119 7803-55-6 Vanadic acid, ammonium salt
P120 1314-62-1 Vanadium oxide V2 O5
P120 1314-62-1 Vanadium pentoxide
P084 4549-40-0 Vinylamine, N-methyl-N-nitroso-
P001 \1\ 81-81-2 Warfarin, & salts, when present at
concentrations greater than 0.3%
P205 137-30-4 Zinc, bis(dimethylcarbamodithioato-
S,S[prime])-,
P121 557-21-1 Zinc cyanide
P121 557-21-1 Zinc cyanide Zn(CN)2
P122 1314-84-7 Zinc phosphide Zn3 P2, when present at
concentrations greater than 10% (R,T)
P205 137-30-4 Ziram.
------------------------------------------------------------------------
\1\ CAS Number given for parent compound only.
(f) The commercial chemical products, manfacturing chemical intermediates, or off-specification commercial chemical products referred to in paragraphs (a) through (d) of this section, are identified as toxic wastes (T), unless otherwise designated and are subject to the small quantity generator exclusion defined in §261.5 (a) and (g).
[Comment: For the convenience of the regulated community, the primary hazardous properties of these materials have been indicated by the letters T (Toxicity), R (Reactivity), I (Ignitability) and C (Corrosivity). Absence of a letter indicates that the compound is only listed for toxicity.]
These wastes and their corresponding EPA Hazardous Waste Numbers are:
------------------------------------------------------------------------
Chemical
Hazardous waste abstracts Substance (continued)