Loading (50 kb)...'
(continued)
(b) Automatic transfers. As an alternative to transfers under paragraph (a) of this section, any NPDES permit may be automatically transferred to a new permittee if:
(1) The current permittee notifies the Director at least 30 days in advance of the proposed transfer date in paragraph (b)(2) of this section;
(2) The notice includes a written agreement between the existing and new permittees containing a specific date for transfer of permit responsibility, coverage, and liability between them; and
(3) The Director does not notify the existing permittee and the proposed new permittee of his or her intent to modify or revoke and reissue the permit. A modification under this subparagraph may also be a minor modification under §122.63. If this notice is not received, the transfer is effective on the date specified in the agreement mentioned in paragraph (b)(2) of this section.
§ 122.62 Modification or revocation and reissuance of permits (applicable to State programs, see §123.25).
top
When the Director receives any information (for example, inspects the facility, receives information submitted by the permittee as required in the permit (see §122.41), receives a request for modification or revocation and reissuance under §124.5, or conducts a review of the permit file) he or she may determine whether or not one or more of the causes listed in paragraphs (a) and (b) of this section for modification or revocation and reissuance or both exist. If cause exists, the Director may modify or revoke and reissue the permit accordingly, subject to the limitations of §124.5(c), and may request an updated application if necessary. When a permit is modified, only the conditions subject to modification are reopened. If a permit is revoked and reissued, the entire permit is reopened and subject to revision and the permit is reissued for a new term. See §124.5(c)(2). If cause does not exist under this section or §122.63, the Director shall not modify or revoke and reissue the permit. If a permit modification satisfies the criteria in §122.63 for “minor modifications” the permit may be modified without a draft permit or public review. Otherwise, a draft permit must be prepared and other procedures in part 124 (or procedures of an approved State program) followed.
(a) Causes for modification. The following are causes for modification but not revocation and reissuance of permits except when the permittee requests or agrees.
(1) Alterations. There are material and substantial alterations or additions to the permitted facility or activity (including a change or changes in the permittee's sludge use or disposal practice) which occurred after permit issuance which justify the application of permit conditions that are different or absent in the existing permit.
Note: Certain reconstruction activities may cause the new source provisions of §122.29 to be applicable.
(2) Information. The Director has received new information. Permits may be modified during their terms for this cause only if the information was not available at the time of permit issuance (other than revised regulations, guidance, or test methods) and would have justified the application of different permit conditions at the time of issuance. For NPDES general permits (§122.28) this cause includes any information indicating that cumulative effects on the environment are unacceptable. For new source or new discharger NPDES permits §§122.21, 122.29), this cause shall include any significant information derived from effluent testing required under §122.21(k)(5)(vi) or §122.21(h)(4)(iii) after issuance of the permit.
(3) New regulations. The standards or regulations on which the permit was based have been changed by promulgation of amended standards or regulations or by judicial decision after the permit was issued. Permits may be modified during their terms for this cause only as follows:
(i) For promulgation of amended standards or regulations, when:
(A) The permit condition requested to be modified was based on a promulgated effluent limitation guideline, EPA approved or promulgated water quality standards, or the Secondary Treatment Regulations under part 133; and
(B) EPA has revised, withdrawn, or modified that portion of the regulation or effluent limitation guideline on which the permit condition was based, or has approved a State action with regard to a water quality standard on which the permit condition was based; and
(C) A permittee requests modification in accordance with §124.5 within ninety (90) days after Federal Register notice of the action on which the request is based.
(ii) For judicial decisions, a court of competent jurisdiction has remanded and stayed EPA promulgated regulations or effluent limitation guidelines, if the remand and stay concern that portion of the regulations or guidelines on which the permit condition was based and a request is filed by the permittee in accordance with §124.5 within ninety (90) days of judicial remand.
(iii) For changes based upon modified State certifications of NPDES permits, see §124.55(b).
(4) Compliance schedules. The Director determines good cause exists for modification of a compliance schedule, such as an act of God, strike, flood, or materials shortage or other events over which the permittee has little or no control and for which there is no reasonably available remedy. However, in no case may an NPDES compliance schedule be modified to extend beyond an applicable CWA statutory deadline. See also §122.63(c) (minor modifications) and paragraph (a)(14) of this section (NPDES innovative technology).
(5) When the permittee has filed a request for a variance under CWA section 301(c), 301(g), 301(h), 301(i), 301(k), or 316(a) or for “fundamentally different factors” within the time specified in §122.21 or §125.27(a).
(6) 307(a) toxics. When required to incorporate an applicable 307(a) toxic effluent standard or prohibition (see §122.44(b)).
(7) Reopener. When required by the “reopener” conditions in a permit, which are established in the permit under §122.44(b) (for CWA toxic effluent limitations and Standards for sewage sludge use or disposal, see also §122.44(c)) or 40 CFR 403.18(e) (Pretreatment program).
(8)(i) Net limits. Upon request of a permittee who qualifies for effluent limitations on a net basis under §122.45(g).
(ii) When a discharger is no longer eligible for net limitations, as provided in §122.45(g)(1)(ii).
(9) Pretreatment. As necessary under 40 CFR 403.8(e) (compliance schedule for development of pretreatment program).
(10) Failure to notify. Upon failure of an approved State to notify, as required by section 402(b)(3), another State whose waters may be affected by a discharge from the approved State.
(11) Non-limited pollutants. When the level of discharge of any pollutant which is not limited in the permit exceeds the level which can be achieved by the technology-based treatment requirements appropriate to the permittee under §125.3(c).
(12) Notification levels. To establish a “notification level” as provided in §122.44(f).
(13) Compliance schedules. To modify a schedule of compliance to reflect the time lost during construction of an innovative or alternative facility, in the case of a POTW which has received a grant under section 202(a)(3) of CWA for 100% of the costs to modify or replace facilities constructed with a grant for innovative and alternative wastewater technology under section 202(a)(2). In no case shall the compliance schedule be modified to extend beyond an applicable CWA statutory deadline for compliance.
(14) For a small MS4, to include an effluent limitation requiring implementation of a minimum control measure or measures as specified in §122.34(b) when:
(i) The permit does not include such measure(s) based upon the determination that another entity was responsible for implementation of the requirement(s); and
(ii) The other entity fails to implement measure(s) that satisfy the requirement(s).
(15) To correct technical mistakes, such as errors in calculation, or mistaken interpretations of law made in determining permit conditions.
(16) When the discharger has installed the treatment technology considered by the permit writer in setting effluent limitations imposed under section 402(a)(1) of the CWA and has properly operated and maintained the facilities but nevertheless has been unable to achieve those effluent limitations. In this case, the limitations in the modified permit may reflect the level of pollutant control actually achieved (but shall not be less stringent than required by a subsequently promulgated effluent limitations guideline).
(17) [Reserved]
(18) Land application plans. When required by a permit condition to incorporate a land application plan for beneficial reuse of sewage sludge, to revise an existing land application plan, or to add a land application plan.
(b) Causes for modification or revocation and reissuance. The following are causes to modify or, alternatively, revoke and reissue a permit:
(1) Cause exists for termination under §122.64, and the Director determines that modification or revocation and reissuance is appropriate.
(2) The Director has received notification (as required in the permit, see §122.41(l)(3)) of a proposed transfer of the permit. A permit also may be modified to reflect a transfer after the effective date of an automatic transfer (§122.61(b)) but will not be revoked and reissued after the effective date of the transfer except upon the request of the new permittee.
[48 FR 14153, Apr. 1, 1983, as amended at 49 FR 25981, June 25, 1984; 49 FR 37009, Sept. 29, 1984; 49 FR 38050, Sept. 26, 1984; 50 FR 4514, Jan. 31, 1985; 51 FR 20431, June 4, 1986; 51 FR 26993, July 28, 1986; 54 FR 256, 258, Jan. 4, 1989; 54 FR 18784, May 2, 1989; 60 FR 33931, June 29, 1995; 64 FR 68847, Dec. 8, 1999; 65 FR 30909, May 15, 2000; 70 FR 60191, Oct. 14, 2005]
§ 122.63 Minor modifications of permits.
top
Upon the consent of the permittee, the Director may modify a permit to make the corrections or allowances for changes in the permitted activity listed in this section, without following the procedures of part 124. Any permit modification not processed as a minor modification under this section must be made for cause and with part 124 draft permit and public notice as required in §122.62. Minor modifications may only:
(a) Correct typographical errors;
(b) Require more frequent monitoring or reporting by the permittee;
(c) Change an interim compliance date in a schedule of compliance, provided the new date is not more than 120 days after the date specified in the existing permit and does not interfere with attainment of the final compliance date requirement; or
(d) Allow for a change in ownership or operational control of a facility where the Director determines that no other change in the permit is necessary, provided that a written agreement containing a specific date for transfer of permit responsibility, coverage, and liability between the current and new permittees has been submitted to the Director.
(e)(1) Change the construction schedule for a discharger which is a new source. No such change shall affect a discharger's obligation to have all pollution control equipment installed and in operation prior to discharge under §122.29.
(2) Delete a point source outfall when the discharge from that outfall is terminated and does not result in discharge of pollutants from other outfalls except in accordance with permit limits.
(f) [Reserved]
(g) Incorporate conditions of a POTW pretreatment program that has been approved in accordance with the procedures in 40 CFR 403.11 (or a modification thereto that has been approved in accordance with the procedures in 40 CFR 403.18) as enforceable conditions of the POTW's permits.
[48 FR 14153, Apr. 1, 1983, as amended at 49 FR 38051, Sept. 26, 1984; 51 FR 20431, June 4, 1986; 53 FR 40616, Oct. 17, 1988; 60 FR 33931, June 29, 1995]
§ 122.64 Termination of permits (applicable to State programs, see §123.25).
top
(a) The following are causes for terminating a permit during its term, or for denying a permit renewal application:
(1) Noncompliance by the permittee with any condition of the permit;
(2) The permittee's failure in the application or during the permit issuance process to disclose fully all relevant facts, or the permittee's misrepresentation of any relevant facts at any time;
(3) A determination that the permitted activity endangers human health or the environment and can only be regulated to acceptable levels by permit modification or termination; or
(4) A change in any condition that requires either a temporary or permanent reduction or elimination of any discharge or sludge use or disposal practice controlled by the permit (for example, plant closure or termination of discharge by connection to a POTW).
(b) The Director shall follow the applicable procedures in part 124 or part 22 of this chapter, as appropriate (or State procedures equivalent to part 124) in terminating any NPDES permit under this section, except that if the entire discharge is permanently terminated by elimination of the flow or by connection to a POTW (but not by land application or disposal into a well), the Director may terminate the permit by notice to the permittee. Termination by notice shall be effective 30 days after notice is sent, unless the permittee objects within that time. If the permittee objects during that period, the Director shall follow part 124 of this chapter or applicable State procedures for termination. Expedited permit termination procedures are not available to permittees that are subject to pending State and/or Federal enforcement actions including citizen suits brought under State or Federal law. If requesting expedited permit termination procedures, a permittee must certify that it is not subject to any pending State or Federal enforcement actions including citizen suits brought under State or Federal law. State-authorized NPDES programs are not required to use part 22 of this chapter procedures for NPDES permit terminations.
[48 FR 14153, Apr. 1, 1983; 50 FR 6940, Feb. 19, 1985, as amended at 54 FR 18784, May 2, 1989; 65 FR 30909, May 15, 2000]
Appendix A to Part 122—NPDES Primary Industry Categories
top
Any permit issued after June 30, 1981 to dischargers in the following categories shall include effluent limitations and a compliance schedule to meet the requirements of section 301(b)(2)(A), (C), (D), (E) and (F) of CWA, whether or not applicable effluent limitations guidelines have been promulgated. See §§122.44 and 122.46.
Industry Category
Adhesives and sealants
Aluminum forming
Auto and other laundries
Battery manufacturing
Coal mining
Coil coating
Copper forming
Electrical and electronic components
Electroplating
Explosives manufacturing
Foundries
Gum and wood chemicals
Inorganic chemicals manufacturing
Iron and steel manufacturing
Leather tanning and finishing
Mechanical products manufacturing
Nonferrous metals manufacturing
Ore mining
Organic chemicals manufacturing
Paint and ink formulation
Pesticides
Petroleum refining
Pharmaceutical preparations
Photographic equipment and supplies
Plastics processing
Plastic and synthetic materials manufacturing
Porcelain enameling
Printing and publishing
Pulp and paper mills
Rubber processing
Soap and detergent manufacturing
Steam electric power plants
Textile mills
Timber products processing
Appendix B to Part 122 [Reserved]
top
Appendix C to Part 122—Criteria for Determining a Concentrated Aquatic Animal Production Facility (§122.24)
top
A hatchery, fish farm, or other facility is a concentrated aquatic animal production facility for purposes of §122.24 if it contains, grows, or holds aquatic animals in either of the following categories:
(a) Cold water fish species or other cold water aquatic animals in ponds, raceways, or other similar structures which discharge at least 30 days per year but does not include:
(1) Facilities which produce less than 9,090 harvest weight kilograms (approximately 20,000 pounds) of aquatic animals per year; and
(2) Facilities which feed less than 2,272 kilograms (approximately 5,000 pounds) of food during the calendar month of maximum feeding.
(b) Warm water fish species or other warm water aquatic animals in ponds, raceways, or other similar structures which discharge at least 30 days per year, but does not include:
(1) Closed ponds which discharge only during periods of excess runoff; or
(2) Facilities which produce less than 45,454 harvest weight kilograms (approximately 100,000 pounds) of aquatic animals per year.
“Cold water aquatic animals” include, but are not limited to, the Salmonidae family of fish; e.g., trout and salmon.
“Warm water aquatic animals” include, but are not limited to, the Ameiuride, Centrarchidae and Cyprinidae families of fish; e.g., respectively, catfish, sunfish and minnows.
Appendix D to Part 122—NPDES Permit Application Testing Requirements (§122.21)
top
Table I_Testing Requirements for Organic Toxic Pollutants by Industrial
Category for Existing Dischargers
------------------------------------------------------------------------
GC/MS Fraction \1\
--------------------------------------
Industrial category Base/
Volatile Acid neutral Pesticide
------------------------------------------------------------------------
Adhesives and Sealants........... \2\ \2\ \2\
Aluminum Forming................. \2\ \2\ \2\
Auto and Other Laundries......... \2\ \2\ \2\ \2\
Battery Manufacturing............ \2\ ....... \2\
Coal Mining...................... \2\ \2\ \2\ \2\
Coil Coating..................... \2\ \2\ \2\
Copper Forming................... \2\ \2\ \2\
Electric and Electronic \2\ \2\ \2\ \2\
Components......................
Electroplating................... \2\ \2\ \2\
Explosives Manufacturing......... ........ \2\ \2\
Foundries........................ \2\ \2\ \2\
Gum and Wood Chemicals........... \2\ \2\ \2\ \2\
Inorganic Chemicals Manufacturing \2\ \2\ \2\
Iron and Steel Manufacturing..... \2\ \2\ \2\
Leather Tanning and Finishing.... \2\ \2\ \2\ \2\
Mechanical Products Manufacturing \2\ \2\ \2\
Nonferrous Metals Manufacturing.. \2\ \2\ \2\ \2\
Ore Mining....................... \2\ \2\ \2\ \2\
Organic Chemicals Manufacturing.. \2\ \2\ \2\ \2\
Paint and Ink Formulation........ \2\ \2\ \2\ \2\
Pesticides....................... \2\ \2\ \2\ \2\
Petroleum Refining............... \2\ \2\ \2\ \2\
Pharmaceutical Preparations...... \2\ \2\ \2\
Photographic Equipment and \2\ \2\ \2\ \2\
Supplies........................
Plastic and Synthetic Materials \2\ \2\ \2\ \2\
Manufacturing...................
Plastic Processing............... \2\ ....... .......
Porcelain Enameling.............. \2\ ....... \2\ \2\
Printing and Publishing.......... \2\ \2\ \2\ \2\
Pulp and Paper Mills............. \2\ \2\ \2\ \2\
Rubber Processing................ \2\ \2\ \2\
Soap and Detergent Manufacturing. \2\ \2\ \2\
Steam Electric Power Plants...... \2\ \2\ \2\
Textile Mills.................... \2\ \2\ \2\ \2\
Timber Products Processing....... \2\ \2\ \2\ \2\
------------------------------------------------------------------------
\1\ The toxic pollutants in each fraction are listed in Table II.
\2\ Testing required.
Table II—Organic Toxic Pollutants in Each of Four Fractions in Analysis by Gas Chromatography/Mass Spectroscopy (GS/MS)
Volatiles
1V acrolein
2V acrylonitrile
3V benzene
5V bromoform
6V carbon tetrachloride
7V chlorobenzene
8V chlorodibromomethane
9V chloroethane
10V 2-chloroethylvinyl ether
11V chloroform
12V dichlorobromomethane
14V 1,1-dichloroethane
15V 1,2-dichloroethane
16V 1,1-dichloroethylene
17V 1,2-dichloropropane
18V 1,3-dichloropropylene
19V ethylbenzene
20V methyl bromide
21V methyl chloride
22V methylene chloride
23V 1,1,2,2-tetrachloroethane
24V tetrachloroethylene
25V toluene
26V 1,2-trans-dichloroethylene
27V 1,1,1-trichloroethane
28V 1,1,2-trichloroethane
29V trichloroethylene
31V vinyl chloride
Acid Compounds
1A 2-chlorophenol
2A 2,4-dichlorophenol
3A 2,4-dimethylphenol
4A 4,6-dinitro-o-cresol
5A 2,4-dinitrophenol
6A 2-nitrophenol
7A 4-nitrophenol
8A p-chloro-m-cresol
9A pentachlorophenol
10A phenol
11A 2,4,6-trichlorophenol
Base/Neutral
1B acenaphthene
2B acenaphthylene
3B anthracene
4B benzidine
5B benzo(a)anthracene
6B benzo(a)pyrene
7B 3,4-benzofluoranthene
8B benzo(ghi)perylene
9B benzo(k)fluoranthene
10B bis(2-chloroethoxy)methane
11B bis(2-chloroethyl)ether
12B bis(2-chloroisopropyl)ether
13B bis (2-ethylhexyl)phthalate
14B 4-bromophenyl phenyl ether
15B butylbenzyl phthalate
16B 2-chloronaphthalene
17B 4-chlorophenyl phenyl ether
18B chrysene
19B dibenzo(a,h)anthracene
20B 1,2-dichlorobenzene
21B 1,3-dichlorobenzene
22B 1,4-dichlorobenzene
23B 3,3'-dichlorobenzidine
24B diethyl phthalate
25B dimethyl phthalate
26B di-n-butyl phthalate
27B 2,4-dinitrotoluene
28B 2,6-dinitrotoluene
29B di-n-octyl phthalate
30B 1,2-diphenylhydrazine (as azobenzene)
31B fluroranthene
32B fluorene
33B hexachlorobenzene
34B hexachlorobutadiene
35B hexachlorocyclopentadiene
36B hexachloroethane
37B indeno(1,2,3-cd)pyrene
38B isophorone
39B napthalene
40B nitrobenzene
41B N-nitrosodimethylamine
42B N-nitrosodi-n-propylamine
43B N-nitrosodiphenylamine
44B phenanthrene
45B pyrene
46B 1,2,4-trichlorobenzene
Pesticides
1P aldrin
2P alpha-BHC
3P beta-BHC
4P gamma-BHC
5P delta-BHC
6P chlordane
7P 4,4'-DDT
8P 4,4'-DDE
9P 4,4'-DDD
10P dieldrin
11P alpha-endosulfan
12P beta-endosulfan
13P endosulfan sulfate
14P endrin
15P endrin aldehyde
16P heptachlor
17P heptachlor epoxide
18P PCB-1242
19P PCB-1254
20P PCB-1221
21P PCB-1232
22P PCB-1248
23P PCB-1260
24P PCB-1016
25P toxaphene
Table III—Other Toxic Pollutants (Metals and Cyanide) and Total Phenols
Antimony, Total
Arsenic, Total
Beryllium, Total
Cadmium, Total
Chromium, Total
Copper, Total
Lead, Total
Mercury, Total
Nickel, Total
Selenium, Total
Silver, Total
Thallium, Total
Zinc, Total
Cyanide, Total
Phenols, Total
Table IV—Conventional and Nonconventional Pollutants Required To Be Tested by Existing Dischargers if Expected to be Present
Bromide
Chlorine, Total Residual
Color
Fecal Coliform
Fluoride
Nitrate-Nitrite
Nitrogen, Total Organic
Oil and Grease
Phosphorus, Total
Radioactivity
Sulfate
Sulfide
Sulfite
Surfactants
Aluminum, Total
Barium, Total
Boron, Total
Cobalt, Total
Iron, Total
Magnesium, Total
Molybdenum, Total
Manganese, Total
Tin, Total
Titanium, Total
Table V—Toxic Pollutants and Hazardous Substances Required To Be Identified by Existing Dischargers if Expected To Be Present
Toxic Pollutants
Asbestos
Hazardous Substances
Acetaldehyde
Allyl alcohol
Allyl chloride
Amyl acetate
Aniline
Benzonitrile
Benzyl chloride
Butyl acetate
Butylamine
Captan
Carbaryl
Carbofuran
Carbon disulfide
Chlorpyrifos
Coumaphos
Cresol
Crotonaldehyde
Cyclohexane
2,4-D (2,4-Dichlorophenoxy acetic acid)
Diazinon
Dicamba
Dichlobenil
Dichlone
2,2-Dichloropropionic acid
Dichlorvos
Diethyl amine
Dimethyl amine
Dintrobenzene
Diquat
Disulfoton
Diuron
Epichlorohydrin
Ethion
Ethylene diamine
Ethylene dibromide
Formaldehyde
Furfural
Guthion
Isoprene
Isopropanolamine Dodecylbenzenesulfonate
Kelthane
Kepone
Malathion
Mercaptodimethur
Methoxychlor
Methyl mercaptan
Methyl methacrylate
Methyl parathion
Mevinphos
Mexacarbate
Monoethyl amine
Monomethyl amine
Naled
Napthenic acid
Nitrotoluene
Parathion
Phenolsulfanate
Phosgene
Propargite
Propylene oxide
Pyrethrins
Quinoline
Resorcinol
Strontium
Strychnine
Styrene
2,4,5-T (2,4,5-Trichlorophenoxy acetic acid)
TDE (Tetrachlorodiphenylethane)
2,4,5-TP [2-(2,4,5-Trichlorophenoxy) propanoic acid]
Trichlorofan
Triethanolamine dodecylbenzenesulfonate
Triethylamine
Trimethylamine
Uranium
Vanadium
Vinyl acetate
Xylene
Xylenol
Zirconium
[Note 1: The Environmental Protection Agency has suspended the requirements of §122.21(g)(7)(ii)(A) and Table I of Appendix D as they apply to certain industrial categories. The suspensions are as follows:
a. At 46 FR 2046, Jan. 8, 1981, the Environmental Protection Agency suspended until further notice §122.21(g)(7)(ii)(A) as it applies to coal mines.
b. At 46 FR 22585, Apr. 20, 1981, the Environmental Protection Agency suspended until further notice §122.21(g)(7)(ii)(A) and the corresponding portions of Item V-C of the NPDES application Form 2c as they apply to:
1. Testing and reporting for all four organic fractions in the Greige Mills Subcategory of the Textile Mills industry (Subpart C—Low water use processing of 40 CFR part 410), and testing and reporting for the pesticide fraction in all other subcategories of this industrial category.
2. Testing and reporting for the volatile, base/neutral and pesticide fractions in the Base and Precious Metals Subcategory of the Ore Mining and Dressing industry (subpart B of 40 CFR part 440), and testing and reporting for all four fractions in all other subcategories of this industrial category.
3. Testing and reporting for all four GC/MS fractions in the Porcelain Enameling industry.
c. At 46 FR 35090, July 1, 1981, the Environmental Protection Agency suspended until further notice §122.21(g)(7)(ii)(A) and the corresponding portions of Item V-C of the NPDES application Form 2c as they apply to:
1. Testing and reporting for the pesticide fraction in the Tall Oil Rosin Subcategory (subpart D) and Rosin-Based Derivatives Subcategory (subpart F) of the Gum and Wood Chemicals industry (40 CFR part 454), and testing and reporting for the pesticide and base/netural fractions in all other subcategories of this industrial category.
2. Testing and reporting for the pesticide fraction in the Leather Tanning and Finishing, Paint and Ink Formulation, and Photographic Supplies industrial categories.
3. Testing and reporting for the acid, base/neutral and pesticide fractions in the Petroleum Refining industrial category.
4. Testing and reporting for the pesticide fraction in the Papergrade Sulfite subcategories (subparts J and U) of the Pulp and Paper industry (40 CFR part 430); testing and reporting for the base/neutral and pesticide fractions in the following subcategories: Deink (subpart Q), Dissolving Kraft (subpart F), and Paperboard from Waste Paper (subpart E); testing and reporting for the volatile, base/neutral and pesticide fractions in the following subcategories: BCT Bleached Kraft (subpart H), Semi-Chemical (subparts B and C), and Nonintegrated-Fine Papers (subpart R); and testing and reporting for the acid, base/neutral, and pesticide fractions in the following subcategories: Fine Bleached Kraft (subpart I), Dissolving Sulfite Pulp (subpart K), Groundwood-Fine Papers (subpart O), Market Bleached Kraft (subpart G), Tissue from Wastepaper (subpart T), and Nonintegrated-Tissue Papers (subpart S).
5. Testing and reporting for the base/neutral fraction in the Once-Through Cooling Water, Fly Ash and Bottom Ash Transport Water process wastestreams of the Steam Electric Power Plant industrial category.
This revision continues these suspensions.]*
*Editorial Note: The words “This revision” refer to the document published at 48 FR 14153, Apr. 1, 1983.
For the duration of the suspensions, therefore, Table I effectively reads:
Table I_Testing Requirements for Organic Toxic Pollutants by Industry
Category
------------------------------------------------------------------------
GC/MS fraction \2\
Industry category -------------------------------------
Volatile Acid Neutral Pesticide
------------------------------------------------------------------------
Adhesives and sealants............ (\1\) (\1\) (\1\)
Aluminum forming.................. (\1\) (\1\) (\1\)
Auto and other laundries.......... (\1\) (\1\) (\1\) (\1\)
Battery manufacturing............. (\1\) ...... (\1\)
Coal mining....................... ........ ...... .......
Coil coating...................... (\1\) (\1\) (\1\)
Copper forming.................... (\1\) (\1\) (\1\)
Electric and electronic compounds. (\1\) (\1\) (\1\) (\1\)
Electroplating.................... (\1\) (\1\) (\1\)
Explosives manufacturing.......... ........ (\1\) (\1\)
Foundries......................... (\1\) (\1\) (\1\)
Gum and wood (all subparts except (\1\) (\1\) .......
D and F).........................
Subpart D_tall oil rosin.......... (\1\) (\1\) (\1\)
Subpart F_rosin-based derivatives. (\1\) (\1\) (\1\)
Inorganic chemicals manufacturing. (\1\) (\1\) (\1\)
Iron and steel manufacturing...... (\1\) (\1\) (\1\)
Leather tanning and finishing..... (\1\) (\1\) (\1\)
Mechanical products manufacturing. (\1\) (\1\) (\1\)
Nonferrous metals manufacturing... (\1\) (\1\) (\1\) (\1\)
Ore mining (applies to the base ........ (\1\)
and precious metals/Subpart B)...
Organic chemicals manufacturing... (\1\) (\1\) (\1\) (\1\)
Paint and ink formulation......... (\1\) (\1\) (\1\)
Pesticides........................ (\1\) (\1\) (\1\) (\1\)
Petroleum refining................ (\1\)
Pharmaceutical preparations....... (\1\) (\1\) (\1\)
Photographic equipment and (\1\) (\1\) (\1\)
supplies.........................
Plastic and synthetic materials (\1\) (\1\) (\1\) (\1\)
manufacturing....................
Plastic processing................ (\1\)
Porcelain enameling...............
Printing and publishing........... (\1\) (\1\) (\1\) (\1\)
Pulp and paperboard mills_see
footnote \3\.....................
Rubber processing................. (\1\) (\1\) (\1\)
Soap and detergent manufacturing.. (\1\) (\1\) (\1\)
Steam electric power plants....... (\1\) (\1\)
Textile mills (Subpart C_Greige (\1\) (\1\) (\1\)
Mills are exempt from this table)
Timber products processing........ (\1\) (\1\) (\1\) (\1\)
------------------------------------------------------------------------
\1\ Testing required.
\2\ The pollutants in each fraction are listed in Item V-C.
\3\ Pulp and Paperboard Mills:
------------------------------------------------------------------------
GS/MS fractions
------------------------------------
Subpart \3\ Base/
VOA Acid neutral Pesticides
------------------------------------------------------------------------
A.................... \2\ (\1\) \2\ (\1\)
B.................... \2\ (\1\) \2\ \2\
C.................... \2\ (\1\) \2\ \2\
D.................... \2\ (\1\) \2\ \2\
E.................... (\1\) (\1\) \2\ (\1\)
F.................... (\1\) (\1\) \2\ \2\
G.................... (\1\) (\1\) \2\ \2\
H.................... (\1\) (\1\) \2\ \2\
I.................... (\1\) (\1\) \2\ \2\
J.................... (\1\) (\1\) (\1\) \2\
K.................... (\1\) (\1\) \2\ \2\
L.................... (\1\) (\1\) \2\ \2\
M.................... (\1\) (\1\) \2\ \2\
N.................... (\1\) (\1\) \2\ \2\
O.................... (\1\) (\1\) \2\ \2\
P.................... (\1\) (\1\) \2\ \2\
Q.................... (\1\) (\1\) \2\ (\1\)
R.................... \2\ (\1\) \2\ \2\
S.................... (\1\) (\1\) \2\ (\1\)
T.................... (\1\) (\1\) \2\ (\1\)
U.................... (\1\) (\1\) (\1\) \2\
------------------------------------------------------------------------
\1\ Must test.
\2\ Do not test unless ``reason to believe'' it is discharged.
\3\ Subparts are defined in 40 CFR Part 430.
[48 FR 14153, Apr. 1, 1983, as amended at 49 FR 38050, Sept. 26, 1984; 50 FR 6940, Feb. 19, 1985]
Appendix E to Part 122—Rainfall Zones of the United States
top
View or download PDF
Not Shown: Alaska (Zone 7); Hawaii (Zone 7); Northern Mariana Islands (Zone 7); Guam (Zone 7); American Samoa (Zone 7); Trust Territory of the Pacific Islands (Zone 7); Puerto Rico (Zone 3) Virgin Islands (Zone 3).
Source: Methodology for Analysis of Detention Basins for Control of Urban Runoff Quality, prepared for U.S. Environmental Protection Agency, Office of Water, Nonpoint Source Division, Washington, DC, 1986.
[55 FR 48073, Nov. 16, 1990]
Appendix F to Part 122—Incorporated Places With Populations Greater Than 250,000 According to the 1990 Decennial Census by the Bureau of the Census
top
------------------------------------------------------------------------
State Incorporated Place
------------------------------------------------------------------------
Alabama................................... Birmingham.
Arizona................................... Phoenix.
Tucson.
California................................ Long Beach.
Los Angeles.
Oakland.
Sacramento.
San Diego.
San Francisco.
San Jose.
Colorado.................................. Denver.
District of Columbia......................
Florida................................... Jacksonville.
Miami.
Tampa.
Georgia................................... Atlanta.
Illinois.................................. Chicago.
Indiana................................... Indianapolis.
Kansas.................................... Wichita.
Kentucky.................................. Louisville.
Louisiana................................. New Orleans.
Maryland.................................. Baltimore.
Massachusetts............................. Boston.
Michigan.................................. Detroit.
Minnesota................................. Minneapolis.
St. Paul.
Missouri.................................. Kansas City.
St. Louis.
Nebraska.................................. Omaha.
New Jersey................................ Newark.
New Mexico................................ Albuquerque.
New York.................................. Buffalo.
Bronx Borough.
Brooklyn Borough.
Manhattan Borough.
Queens Borough.
Staten Island Borough.
North Carolina............................ Charlotte.
Ohio...................................... Cincinnati.
Cleveland.
Columbus.
Toledo.
Oklahoma.................................. Oklahoma City.
Tulsa.
Oregon.................................... Portland.
Pennsylvania.............................. Philadelphia.
Pittsburgh.
Tennessee................................. Memphis.
Nashville/Davidson.
Texas..................................... Austin.
Dallas.
El Paso.
Fort Worth.
Houston.
San Antonio.
Virginia.................................. Norfolk.
Virginia Beach.
Washington................................ Seattle.
Wisconsin................................. Milwaukee.
------------------------------------------------------------------------
[64 FR 68847, Dec. 8, 1999, as amended at 67 FR 47152, July 17, 2002]
Appendix G to Part 122—Incorporated Places With Populations Greater Than 100,000 But Less Than 250,000 According to the 1990 Decennial Census by the Bureau of the Census
top
------------------------------------------------------------------------
State Incorporated place
------------------------------------------------------------------------
Alabama................................... Huntsville.
Mobile.
Montgomery.
Alaska.................................... Anchorage.
Arizona................................... Mesa.
Tempe.
Arkansas.................................. Little Rock.
California................................ Anaheim.
Bakersfield.
Berkeley.
Chula Vista.
Concord.
El Monte.
Escondido.
Fremont.
Fresno.
Fullerton.
Garden Grove.
Glendale.
Hayward.
Huntington Beach.
Inglewood.
Irvine.
Modesto.
Moreno Valley.
Oceanside.
Ontario.
Orange.
Colorado.................................. Aurora.
Colorado Springs.
Lakewood.
Pueblo.
Connecticut............................... Bridgeport.
Hartford.
New Haven.
Stamford.
Waterbury.
Florida................................... Fort Lauderdale.
Hialeah.
Hollywood.
Orlando.
St. Petersburg.
Tallahassee.
Georgia................................... Columbus.
Macon.
Savannah.
Idaho..................................... Boise City.
Illinois.................................. Peoria.
Rockford.
Indiana................................... Evansville.
Fort Wayne.
Gary.
South Bend.
Iowa...................................... Cedar Rapids.
Davenport.
Des Moines.
Kansas.................................... Kansas City.
Topeka.
Kentucky.................................. Lexington-Fayette.
Louisiana................................. Baton Rouge.
Shreveport.
Massachusetts............................. Springfield.
Worcester.
Michigan.................................. Ann Arbor.
Flint.
Grand Rapids.
Lansing.
Livonia.
Sterling Heights.
Warren.
Mississippi............................... Jackson.
Missouri.................................. Independence.
Springfield.
Nebraska.................................. Lincoln.
Nevada.................................... Las Vegas.
Reno.
New Jersey................................ Elizabeth.
Jersey City.
Paterson.
New York.................................. Albany.
Rochester.
Syracuse.
Yonkers.
North Carolina............................ Durham.
Greensboro.
Raleigh.
Winston-Salem.
Ohio...................................... Akron.
Dayton.
Youngstown.
Oregon.................................... Eugene.
Pennsylvania.............................. Allentown.
Erie.
Rhode Island.............................. Providence.
South Carolina............................ Columbia.
Tennessee................................. Chattanooga.
Knoxville.
Texas..................................... Abilene.
Amarillo.
Arlington.
Beaumont.
Corpus Christi.
Garland.
Irving.
Laredo.
Lubbock.
Mesquite.
Pasadena.
Plano.
Waco.
Utah...................................... Salt Lake City.
Virginia.................................. Alexandria.
Chesapeake.
Hampton.
Newport News.
Portsmouth.
Richmond.
Roanoke.
Washington................................ Spokane.
Tacoma.
Wisconsin................................. Madison.
------------------------------------------------------------------------
[64 FR 68848, Dec. 8, 1999]
Appendix H to Part 122—Counties with Unincorporated Urbanized Areas With a Population of 250,000 or More According to the 1990 Decennial Census by the Bureau of the Census
top
------------------------------------------------------------------------
Unincorporated
State County urbanized
population
------------------------------------------------------------------------
California........................ Los Angeles......... 886,780
Sacramento.......... 594,889
San Diego........... 250,414
Delaware.......................... New Castle.......... 296,996
Florida........................... Dade................ 1,014,504
Georgia........................... DeKalb.............. 448,686
Hawaii............................ Honolulu \1\........ 114,506
Maryland.......................... Anne Arundel........ 344,654
Baltimore........... 627,593
Montgomery.......... 599,028
Prince George's..... 494,369
Texas............................. Harris.............. 729,206
Utah.............................. Salt Lake........... 270,989
Virginia.......................... Fairfax............. 760,730
Washington........................ King................ 520,468
------------------------------------------------------------------------
\1\ County was previously listed in this appendix; however, population
dropped to below 250,000 in the 1990 Census.
[64 FR 68848, Dec. 8, 1999]
Appendix I to Part 122—Counties With Unincorporated Urbanized Areas Greater Than 100,000, But Less Than 250,000 According to the 1990 Decennial Census by the Bureau of the Census
top
------------------------------------------------------------------------
Unincorporated
State County urbanized
population
------------------------------------------------------------------------
Alabama........................... Jefferson........... 78,608
Arizona........................... Pima................ 162,202
California........................ Alameda............. 115,082
Contra Costa........ 131,082
Kern................ 128,503
Orange.............. 223,081
Riverside........... 166,509
San Bernardino...... 162,202
Colorado.......................... Arapahoe............ 103,248
Florida........................... Broward............. 142,329
Escambia............ 167,463
Hillsborough........ 398,593
Lee................. 102,337
Manatee............. 123,828
Orange.............. 378,611
Palm Beach.......... 360,553
Pasco............... 148,907
Pinellas............ 255,772
Polk................ 121,528
Sarasota............ 172,600
Seminole............ 127,873
Georgia........................... Clayton............. 133,237
Cobb................ 322,595
Fulton.............. 127,776
Gwinnett............ 237,305
Richmond............ 126,476
Kentucky.......................... Jefferson........... 239,430
Louisiana......................... East Baton Rouge.... 102,539
Parish.............. 331,307
Jefferson Parish.... (continued)