Loading (50 kb)...'
(continued)
“Software” for items described in 0A002 is subject to the export licensing authority of the U.S. Department of State, Directorate of Defense Trade Controls (see 22 CFR part 121).
License Exceptions
CIV: N/A
TSR: N/A
List of Items Controlled
Unit: N/A
Related Controls: N/A
Related Definitions: N/A
Items: The List of Items Controlled is contained in the ECCN heading.
0D999 Specific Software, as Follows (See List of Items Controlled).
License Requirements
Reason for Control: AT.
Control(s)—Country Chart: AT applies to entire entry. A license is required for items controlled by this entry to Iraq and North Korea for anti-terrorism reasons. The Commerce Country Chart is not designed to determine AT licensing requirements for this entry. See §742.19 and §746.3 of the EAR for additional information.
License Exceptions
CIV: N/A
TSR: N/A
List of Items Controlled
Unit: $ value.
Related Controls: N/A.
Related Definitions: N/A.
Items:
a. Software for neutronic calculations/modeling;
b. Software for radiation transport calculations/modeling;
c. Software for hydrodynamic calculations/modeling.
E. Technology
0E001 “Technology,” according to the Nuclear Technology Note, for the “development”, “production”, or “use” of items described in 0A001, 0A002, 0B (except 0B986 and 0B999), 0C, or 0D001.
License Requirements
Reason for Control
Control(s)
“Technology” for items described in 0A001, 0B001, 0B002, 0B003, 0B004, 0B005, 0B006, 0C001, 0C002, 0C004, 0C005, 0C006, 0C201, or 0D001 (applies to “software” in 0D001 for all items except those described in 0A002) is subject to the export licensing authority of the Department of Energy (see 10 CFR part 810).
“Technology” for items described in 0A002 and 0D001 (applies to “software” in 0D001 for items described in 0A002 only) is subject to the export licensing authority of the U.S. Department of State, Directorate of Defense Trade Controls (see 22 CFR part 121).
License Exceptions
CIV: N/A
TSR: N/A
List of Items Controlled
Unit: N/A
Related Controls: N/A
Related Definitions: N/A
Items: The List of Items Controlled is contained in the ECCN heading.
0E018 “Technology” for the “Development”, “Production”, or “Use” of Items Controlled by 0A018.a Through 0A018.c.
License Requirements
Reason for Control: NS, UN, AT.
Reason for Control: NS, UN, AT.
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
NS applies to entire entry.............. NS Column 1.
UN applies to entire entry.............. Iraq and Rwanda.
AT applies to entire entry.............. AT Column 1.
------------------------------------------------------------------------
License Exceptions
CIV: N/A
TSR: Yes, except N/A for Rwanda
List of Items Controlled
Unit: N/A
Related Controls: N/A
Related Definitions: N/A
Items: The list of items controlled is contained in the ECCN heading
0E918 “Technology” for the “Development”, “Production”, or “Use” of Bayonets.
License Requirements
Reason for Control: RS, UN, AT.
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
RS applies to entire entry............... RS Column 2.
UN applies to entire entry............... Iraq and Rwanda.
AT applies to entire entry............... AT Column 1.
------------------------------------------------------------------------
License Exceptions
CIV: N/A
TSR: N/A
List of Items Controlled
Unit: N/A
Related Controls: N/A
Related Definitions: N/A
Items:
The list of items controlled is contained in the ECCN heading.
0E982 “Technology” exclusively for the “development” or “production” of equipment controlled by 0A982 or 0A985.
License Requirements
Reason for Control: CC
Control(s)
CC applies to “technology” for items controlled by 0A982 or 0A985. A license is required for ALL destinations, except Canada, regardless of end-use. Accordingly, a column specific to this control does not appear on the Commerce Country Chart. (See part 742 of the EAR for additional information.)
License Exceptions
CIV: N/A
TSR: N/A
List of Items Controlled
Unit: N/A
Related Controls: N/A
Related Definitions: N/A
Items: The list of items controlled is contained in the ECCN heading.
0E984 “Technology” for the “development” or “production” of shotguns controlled by 0A984 and buckshot shotgun shells.
License Requirements
Reason for Control: CC, UN.
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
CC applies to ``technology'' for CC Column 1.
shotguns with a barrel length over 18
in. (45.72 cm) but less than 24 in.
(60.96 cm) and shotgun shells,
regardless of end-user.
CC applies to ``technology'' for CC Column 2.
shotguns with a barrel length over 24
in. (60.96 cm), regardless of end-user.
CC applies to ``technology'' for CC Column 3.
shotguns with a barrel length over 24
in. (60.96 cm) if for sale or resale
to police or law enforcement.
UN applies to entire entry............. Iraq and Rwanda.
------------------------------------------------------------------------
License Exceptions
CIV: N/A
TSR: N/A
List of Items Controlled
Unit: N/A
Related Controls: N/A
Related Definitions: N/A
Items: The list of items controlled is contained in the ECCN heading
EAR99 Items subject to the EAR that are not elsewhere specified in this CCL Category or in any other category in the CCL are designated by the number EAR99.
Category 1—Materials, Chemicals, “Microorganisms” & “Toxins”
A. Systems, Equipment and Components
1A001 Components made from fluorinated compounds, as follows (see List of Items Controlled).
License Requirements
Reason for Control: NS, AT
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
NS applies to entire entry............. NS Column 2
AT applies to entire entry............. AT Column 1
------------------------------------------------------------------------
License Exceptions
LVS: $5000
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: Kilograms.
Related Controls: Items specially designed or modified for missiles or for items on the U.S. Munitions List are subject to the export licensing authority of the U.S. Department of State, Directorate of Defense Trade Controls (see 22 CFR part 121.)
Related Definitions: N/A.
Items:
a. Seals, gaskets, sealants or fuel bladders specially designed for “aircraft” or aerospace use made from more than 50% by weight of any of the materials controlled by 1C009.b or 1C009.c;
b. Piezoelectric polymers and copolymers made from vinylidene fluoride materials controlled by 1C009.a:
b.1. In sheet or film form; and
b.2. With a thickness exceeding 200 µm
c. Seals, gaskets, valve seats, bladders or diaphragms made from fluoroelastomers containing at least one vinylether group as a constitutional unit, specially designed for “aircraft”, aerospace or missile use.
1A002 “Composite” structures or laminates, having any of the following (see List of Items Controlled).
License Requirements
Reason for Control: NS, NP, AT.
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
NS applies to entire entry.............. NS Column 2.
NP applies to 1A002.b.1 in the form of NP Column 1.
tubes with an inside diameter between
75 mm and 400 mm.
1 AT applies to entire entry............ AT Column 1.
------------------------------------------------------------------------
License Requirement Notes:
See §743.1 of the EAR for reporting requirements for exports under License Exceptions.
License Exceptions
LVS: $1,500; N/A for NP; N/A for “composite” structures or laminates controlled by 1A002.a, having an organic “matrix” and made from materials controlled by 1C010.c or 1C010.d.
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: Kilograms.
Related Controls: (1) See ECCNs 1E001 (“development” and “production”) and 1E201 (“use”) for technology for items controlled by this entry. (2) Also see ECCNs 1A202, 1C010, 1C210, 9A010, and 9A110. (3) “Composite” structures specially designed for missile applications (including specially designed subsystems and components) are controlled by ECCN 9A110. (4) “Composite” structures or laminates specially designed or prepared for use in separating uranium isotopes are subject to the export licensing authority of the Nuclear Regulatory Commission (see 10 CFR part 110).
Related Definitions: N/A.
Items:
a. An organic “matrix” and made from materials controlled by 1C010.c, 1C010.d or 1C010.e; or
Note: 1A002.a does not control finished or semifinished items specially designed for purely civilian applications as follows:
a. Sporting goods;
b. Automotive industry;
c. Machine tool industry; and
d. Medical applications.
b. A metal or carbon “matrix” and made from:
b.1. Carbon “fibrous or filamentary materials” with:
b.1.a. A “specific modulus” exceeding 10.15 × 10 6 m; and
b.1.b. A “specific tensile strength” exceeding 17.7 × 10 4 m; or
b.2. Materials controlled by 1C010.c.
Note: 1A002.b does not control finished or semifinished items specially designed for purely civilian applications as follows:
a. Sporting goods;
b. Automotive industry;
c. Machine tool industry; and
d. Medical applications.
Technical Notes: (1) Specific modulus: Young's modulus in pascals, equivalent to N/m 2 divided by specific weight in N/m 3 , measured at a temperature of (296±2) K ((23±2) °C) and a relative humidity of (50±5)%. (2) Specific tensile strength: ultimate tensile strength in pascals, equivalent to N/m 2 divided by specific weight in N/m 3 , measured at a temperature of (296±2) K ((232) °C) and a relative humidity of (50±5)%.
Note: 1A002 does not control composite structures or laminates made from epoxy resin impregnated carbon “fibrous or filamentary materials” for the repair of aircraft structures of laminates, provided that the size does not exceed one square meter (1 m 2 ).
1A003 Manufactures of non-fluorinated polymeric substances controlled by 1C008.a.3 in film, sheet, tape or ribbon form with either of the following characteristics (see List of Items Controlled).
License Requirements
Reason for Control: NS, AT
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
NS applies to entire entry............. NS Column 2
AT applies to entire entry............. AT Column 1
------------------------------------------------------------------------
License Exceptions
LVS: $200
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: Kilograms
Related Controls: This entry does not control manufactures when coated or laminated with copper and designed for the production of electronic printed circuit boards
Related Definitions: N/A
Items: a. With a thickness exceeding 0.254 mm; or
b. Coated or laminated with carbon, graphite, metals or magnetic substances
1A004 Protective and detection equipment and components not specially designed for military use as follows (see List of Items Controlled).
License Requirements
Reason for Control: NS, CB, AT
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
NS applies to entire entry.............. NS Column 2.
CB applies to chemical detection systems CB Column 2.
and dedicated detectors therefor, in
1A004.c, that also have the technical
characteristics described in 2B351.a.
AT applies to entire entry.............. AT Column 1.
------------------------------------------------------------------------
License Exceptions
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: $ value
Related Controls: (1) See ECCNs 1A995, 2B351, and 2B352. (2) Chemical and biological protective and detection equipment specifically designed, developed, modified, configured, or adapted for military applications is subject to the export licensing jurisdiction of the Department of State, Directorate of Defense Trade Controls (see 22 CFR part 121, category XIV(f)), as is commercial equipment that incorporates components or parts controlled under that category unless those components or parts are: (1) Integral to the device; (2) inseparable from the device; and (3) incapable of replacement without compromising the effectiveness of the device, in which case the equipment is subject to the export licensing jurisdiction of the Department of Commerce under ECCN 1A004.
Related Definitions: N/A
Items:
a. Gas masks, filter canisters and decontamination equipment therefor designed or modified for defense against biological agents or radioactive materials adapted for use in war or chemical warfare (CW) agents and specially designed components therefor;
b. Protective suits, gloves and shoes specially designed or modified for defense against biological agents or radioactive materials adapted for use in war or chemical warfare (CW) agents;
c. Nuclear, biological and chemical (NBC) detection systems specially designed or modified for detection or identification of biological agents or radioactive materials adapted for use in war or chemical warfare (CW) agents and specially designed components therefor.
Note: In this entry, the phrase “adapted for use in war” means: Any modification or selection (such as altering purity, shelf life, virulence, dissemination characteristics, or resistance to UV radiation) designed to increase the effectiveness in producing casualties in humans or animals, degrading equipment or damaging crops or the environment.
Note: 1A004 does not control:
a. Personal radiation monitoring dosimeters;
b. Equipment limited by design or function to protect against hazards specific to civil industries, such as mining, quarrying, agriculture, pharmaceuticals, medical, veterinary, environmental, waste management, or to the food industry.
Note: Protective equipment and components are classified as 1A004 if they have been tested and proven effective against penetration of BW/CW agents or their simulants using test protocols published by a U.S. Government Agency, such as the National Institute of Occupational Safety and Health (NIOSH) or the U.S. Army, for use by emergency responders or evacuees in chemical, biological, radiological or nuclear environments and labeled with or otherwise identified by the manufacturer or exporter as being effective against penetration by BW/CW agents even if such equipment or components are used in civil industries such as mining, quarrying, agriculture, pharmaceuticals, medical, veterinary, environmental, waste management, or the food industry.
1A005 Body armor, and specially designed components therefor, not manufactured to military standards or specifications, nor to their equivalents in performance.
License Requirements
Reason for Control: NS, UN, AT.
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
NS applies to entire entry.............. NS Column 2.
UN applies to entire entry.............. Iraq and Rwanda.
AT applies to entire entry.............. AT Column 1.
------------------------------------------------------------------------
License Exceptions
LVS: N/A
GBS: Yes, except UN
CIV: N/A
List of Items Controlled
Unit: $ value
Related Controls: (1) Bulletproof and bullet resistant vests (body armor) NIJ levels III and IV, are subject to the export licensing authority of the U.S. Department of State, Directorate of Defense Trade Controls. (See 22 CFR part 121.) (2) For “fibrous or filamentary materials” used in the manufacture of body armor, see ECCN 1C010.
Related Definitions: NA
Items:
Note to ECCN 1A005: 1. This entry does not control body armor or protective garments when accompanying their user for the user's own personal protection.
2. This entry does not control body armor designed to provide frontal protection only from both fragment and blast from non-military explosive devices.
The list of items controlled is contained in the ECCN heading.
1A101 Devices for reduced observables such as radar reflectivity, ultraviolet/infrared signatures and acoustic signatures, for applications usable in “missiles” and their subsystems.
License Requirements
Reason for Control: MT, AT
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
MT applies to entire entry............. MT Column 1
AT applies to entire entry............. AT Column 1
------------------------------------------------------------------------
License Exceptions
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: $ value
Related Controls: See also 1C101. For commodities that meet the definition of defense articles under 22 CFR 120.3 of the International Traffic in Arms Regulations (ITAR), see also 22 CFR 121.16, Item 17-Category II of the (ITAR), which describes similar commodities under the jurisdiction of the Department of State, Directorate of Defense Trade Controls.
Related Definitions: N/A
Items: The list of items controlled is contained in the ECCN heading.
1A102 Resaturated pyrolized carbon-carbon components designed for “missiles”. (These items are subject to the export licensing authority of the U.S. Department of State, Directorate of Defense Trade Controls. See 22 CFR part 121.)
1A202 Composite structures, other than those controlled by 1A002, in the form of tubes and having both of the following characteristics (see List of Items Controlled).
License Requirements
Reason for Control: NP, AT
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
NP applies to entire entry............. NP Column 1
AT applies to entire entry............. AT Column 1
------------------------------------------------------------------------
License Exceptions
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: Kilograms
Related Controls: (1) See ECCNs 1E201 (“use”) and 1E202 (“development” and “production”) for technology for items controlled by this entry. (2) Also see ECCNs 1A002, 1C010, 1C210, 9A010, and 9A110. (3) “Composite” structures specially designed or prepared for use in separating uranium isotopes are subject to the export licensing authority of the Nuclear Regulatory Commission (see 10 CFR part 110).
Related Definitions: N/A
Items:
a. An inside diameter of between 75 mm and 400 mm; and
b. Made with any of the “fibrous or filamentary materials” specified in 1C010.a or .b or 1C210.a or with carbon prepreg materials specified in 1C210.c.
1A225 Platinized catalysts specially designed or prepared for promoting the hydrogen isotope exchange reaction between hydrogen and water for the recovery of tritium from heavy water or for the production of heavy water.
License Requirements
Reason for Control: NP, AT
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
NP applies to entire entry............. NP Column 1
AT applies to entire entry............. AT Column 1
------------------------------------------------------------------------
License Exceptions
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: Kilograms
Related Controls: (1) See ECCNs 1E201 (“use”) and 1E202 (“development” and “production”) for technology for items controlled by this entry. (2) Equipment specially designed or prepared for the production of heavy water is subject to the export licensing authority of the Nuclear Regulatory Commission (see 10 CFR part 110).
Related Definitions: N/A
Items: The list of items controlled is contained in the ECCN heading.
1A226 Specialized packings, which may be used in separating heavy water from ordinary water, having both of the following characteristics (see List of Items Controlled).
License Requirements
Reason for Control: NP, AT
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
NP applies to entire entry............. NP Column 1
AT applies to entire entry............. AT Column 1
------------------------------------------------------------------------
License Exceptions
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: $ value
Related Controls: (1) See ECCNs 1E201 (“use”) and 1E202 (“development” and “production”) for technology for items controlled by this entry. (2) Equipment specially designed or prepared for the production of heavy water is subject to the export licensing authority of the Nuclear Regulatory Commission (see 10 CFR part 110).
Related Definitions: N/A
Items:
a. Made of phosphor bronze mesh chemically treated to improve wettability; and
b. Designed to be used in vacuum distillation towers.
1A227 High-density (lead glass or other) radiation shielding windows, having all of the following characteristics (see List of Items Controlled), and specially designed frames therefor.
License Requirements
Reason for Control: NP, AT
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
NP applies to entire entry............. NP Column 1
AT applies to entire entry............. AT Column 1
------------------------------------------------------------------------
License Exceptions
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: $ value
Related Controls: (1) See ECCNs 1E201 (“use”) and 1E202 (“development” and “production”) for technology for items controlled by this entry. (2) Equipment specially designed or prepared for nuclear reactors and reprocessing facilities is subject to the export licensing authority of the Nuclear Regulatory Commission (see 10 CFR part 110).
Related Definitions: In 1A227.a, the term “cold area” means the viewing area of the window exposed to the lowest level of radiation in the design application.
Items:
a. A “cold area” greater than 0.09 m 2 ;
b. A density greater than 3 g/cm 3 ; and
c. A thickness of 100 mm or greater.
1A290 Depleted uranium (any uranium containing less than 0.711% of the isotope U–235) in shipments of more than 1,000 kilograms in the form of shielding contained in X-ray units, radiographic exposure or teletherapy devices, radioactive thermoelectric generators, or packaging for the transportation of radioactive materials.
License Requirements
Reason for Control: NP, AT
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
NP applies to entire entry............. NP Column 2
AT applies to entire entry............. AT Column 1
------------------------------------------------------------------------
License Exceptions
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: Kilograms
Related Controls: (1) This entry does not control depleted uranium in fabricated forms for use in munitions. See 22 CFR part 121 for depleted uranium subject to the export licensing authority of the U.S. Department of State, Directorate of Defense Trade Controls. (2) Depleted uranium that is not fabricated for use in munitions or fabricated into commodities solely to take advantage of its high density (e.g., aircraft, ship, or other counterweights) or in the forms listed in this entry are subject to the export licensing authority of the Nuclear Regulatory Commission. (See 10 CFR part 110.) (3) See also 0C001
Related Definitions: N/A
Items: The list of items controlled is contained in the ECCN heading
1A984 Chemical agents, including tear gas formulation containing 1 percent or less of orthochlorobenzalmalononitrile (CS), or 1 percent or less of chloroacetophenone (CN) except in individual containers with a net weight of 20 grams or less; liquid pepper except when packaged in individual containers with a net weight of 3 ounces (85.05 grams) or less; smoke bombs; non-irritant smoke flares, canisters, grenades and charges; and other pyrotechnic articles having dual military and commercial use.
License Requirements
Reason for Control: CC
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
CC applies to entire entry............. CC Column 1
------------------------------------------------------------------------
License Exceptions
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: $ value
Related Controls: N/A
Related Definitions: N/A
Items: The list of items controlled is contained in the ECCN heading.
1A985 Fingerprinting powders, dyes, and inks.
License Requirements
Reason for Control: CC
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
CC applies to entire entry............. CC Column 1
------------------------------------------------------------------------
License Exceptions
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: $ value
Related Controls: N/A
Related Definitions: N/A
Items: The list of items controlled is contained in the ECCN heading.
1A995 Protective and detection equipment and components not specially designed for military use and not controlled by ECCN 1A004 or ECCN 2B351, as follows (see List of Items Controlled).
License Requirements
Reason for Control: AT
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
AT applies to entire entry.............. AT Column 1
------------------------------------------------------------------------
License Exceptions
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: $ value
Related controls: See ECCNs 1A004, 2B351, and 2B352.
Related Definitions: N/A
Items:
a. Personal radiation monitoring dosimeters;
b. Equipment limited by design or function to protect against hazards specific to civil industries, such as mining, quarrying, agriculture, pharmaceuticals, medical, veterinary, environmental, waste management, or to the food industry.
Note: This entry (1A995) does not control items for protection against chemical or biological agents that are consumer goods, packaged for retail sale or personal use, or medical products, such as latex exam gloves, latex surgical gloves, liquid disinfectant soap, disposable surgical drapes, surgical gowns, surgical foot covers, and surgical masks. Such items are classified as EAR99.
1A999 Specific Processing Equipment, n.e.s., as Follows (See List of Items Controlled).
License Requirements
Reason for Control: AT.
Control(s).
Country Chart.
AT applies to entire entry. A license is required for items controlled by this entry to North Korea for anti-terrorism reasons. The Commerce Country Chart is not designed to determine AT licensing requirements for this entry. See §742.19 of the EAR for additional information.
License Exceptions
LVS: N/A.
GBS: N/A.
CIV: N/A.
List of Items Controlled
Unit: $ value.
Related Controls: N/A.
Related Definitions: N/A.
Items:
a. Radiation detection, monitoring and measurement equipment, n.e.s.;
b. Radiographic detection equipment such as x-ray converters, and storage phosphor image plates.
B. Test, Inspection and Production Equipment
1B001 Equipment for the production of fibers, prepregs, preforms or “composites” controlled by 1A002 or 1C010, and specially designed components and accessories therefor.
License Requirements
Reason for Control: NS, MT, NP, AT
Control(s) Country Chart
NS applies to entire entry............. NS Column 2
MT applies to entire entry, except MT Column 1
1B001.d.4 and .f.
NP applies to filament winding machines NP Column 1
described in 1B001.a that are capable
of winding cylindrical rotors having a
diameter between 75 mm (3 in) and 400
mm (16 in) and lengths of 600 mm (24
in) or greater; and coordinating and
programming controls and precision
mandrels for these filament winding
machines.
AT applies to entire entry............. AT Column 1
License Exceptions
LVS: N/A for MT and for 1B001.a; $5,000 for all other items
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: $ value
Related Controls: (1) See ECCN 1D001 for software for items controlled by this entry and see ECCNs 1E001 (“development” and “production”) and 1E101 (“use”) for technology for items controlled by this entry. (2) Also see ECCNs 1B101 and 1B201.
Related Definitions: N/A
Items:
a. Filament winding machines of which the motions for positioning, wrapping and winding fibers are coordinated and programmed in three or more axes, specially designed for the manufacture of “composite” structures or laminates from “fibrous or filamentary materials”;
b. Tape-laying or tow-placement machines of which the motions for positioning and laying tape, tows or sheets are coordinated and programmed in two or more axes, specially designed for the manufacture of “composite” airframe or “missile” structures;
c. Multidirectional, multidimensional weaving machines or interlacing machines, including adapters and modification kits, for weaving, interlacing or braiding fibers to manufacture “composite” structures;
Technical Note: For the purposes of 1B001.c the technique of interlacing includes knitting.
Note: 1B001.c does not control textile machinery not modified for the above end-uses.
d. Equipment specially designed or adapted for the production of reinforcement fibers, as follows:
d.1. Equipment for converting polymeric fibers (such as polyacrylonitrile, rayon, pitch or polycarbosilane) into carbon fibers or silicon carbide fibers, including special equipment to strain the fiber during heating;
d.2. Equipment for the chemical vapor deposition of elements or compounds on heated filamentary substrates to manufacture silicon carbide fibers;
d.3. Equipment for the wet-spinning of refractory ceramics (such as aluminum oxide);
d.4. Equipment for converting aluminum containing precursor fibers into alumina fibers by heat treatment;
e. Equipment for producing prepregs controlled by 1C010.e by the hot melt method;
f. Non-destructive inspection equipment capable of inspecting defects three dimensionally, using ultrasonic or X-ray tomography and specially designed for “composite” materials.
1B002 Equipment for Producing Metal Alloys, Metal Alloy Powder or Alloyed Materials, Specially Designed to Avoid Contamination and Specially Designed for Use in One of the Processes Specified in 1C002.c.2
License Requirements
Reason for Control: NS, AT
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
NS applies to entire entry............. NS Column 2
AT applies to entire entry............. AT Column 1
------------------------------------------------------------------------
License Exceptions
LVS: $5000
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: $ value
Related Controls: N/A
Related Definitions: N/A
Items: The list of items controlled is contained in the ECCN heading
1B003 Tools, dies, molds or fixtures, for “superplastic forming” or “diffusion bonding” titanium or aluminum or their alloys, specially designed for the manufacture of (see List of Items Controlled).
License Requirements
Reason for Control: NS, AT
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
NS applies to entire entry............. NS Column 2
AT applies to entire entry............. AT Column 1
------------------------------------------------------------------------
License Exceptions
LVS: $5000
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: Equipment in number; components in $ value
Related Controls: For specially designed production equipment of systems, sub-systems and components controlled by 9A005 to 9A009, 9A011, 9A101, 9A105 to 9A109, 9A111, and 9A116 to 9A120 usable in “missiles”, see 9B115.
Related Definitions: N/A
Items: a. Airframe or aerospace structures;
b. “Aircraft” or aerospace engines; or
c. Specially designed components for those structures or engines.
1B018 Equipment on the International Munitions List.
License Requirements
Reason for Control: NS, MT, RS, AT, UN
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
NS applies to entire entry.............. NS Column 1.
MT applies to equipment for the MT Column 1.
``production'' of rocket propellants.
RS applies to 1B018.a................... RS Column 2.
AT applies to entire entry.............. AT Column 1.
UN applies to entire entry.............. Iraq and Rwanda.
------------------------------------------------------------------------
License Exceptions
LVS: $3000 for 1B018.a for countries WITHOUT an “X” in RS Column 2 on the Country Chart contained in Supplement No. 1 to part 738 of the EAR; $5000 for 1B018.b; N/A for Rwanda.
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: Equipment in number; parts and accessories in $ value
Related Controls: N/A
Related Definitions: N/A
Items: a. Equipment for the “production” of military explosives and solid propellants.
a.1. Complete installations;
a.2. Specialized components (for example, dehydration presses; extrusion presses for the extrusion of small arms, cannon and rocket propellants; cutting machines for the sizing of extruded propellants; sweetie barrels (tumblers) 6 feet and over in diameter and having over 500 pounds product capacity; and continuous mixers for solid propellants); or
a.3. Nitrators, continuous types; and
a.4. Specially designed parts and accessories therefor.
b. Environmental chambers capable of pressures below (10-4) Torr, and specially designed components therefor.
1B101 Equipment, other than that controlled by 1B001, for the “production” of structural composites, fibers, prepregs or preforms as follows (see List of Items Controlled); and specially designed components and accessories therefor.
License Requirements
Reason for Control:MT, NP, AT
------------------------------------------------------------------------
Control(s) Country Chart
------------------------------------------------------------------------
MT applies to entire entry............. MT Column 1.
NP applies to filament winding machines NP Column 1.
described in 1B101.a that are capable
of winding cylindrical rotors having a
diameter between 75 mm (3 in.) and 400
mm (16 in.) and lengths of 600 mm (24
in.) or greater AND to coordinating
and programming controls and precision
mandrels for these filament winding
machines.
AT applies to entire entry............. AT Column 1.
------------------------------------------------------------------------
License Exceptions
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: $ value
Related Controls: See ECCN 1D101 for software for items controlled by this entry and see ECCNs 1E001 (“development” and “production”) and 1E101 (“use”) for technology for items controlled by this entry. Also see 1B201.
Related Definitions: Examples of components and accessories for the machines controlled by this entry are molds, mandrels, dies, fixtures and tooling for the preform pressing, curing, casting, sintering or bonding of composite structures, laminates and manufactures thereof.
Items:
a. Filament winding machines of which the motions for positioning, wrapping and winding fibers can be coordinated and programmed in three or more axes, designed to fabricate composite structures or laminates from fibrous or filamentary materials, and coordinating and programming controls;
b. Tape-laying machines of which the motions for positioning and laying tape and sheets can be coordinated and programmed in two or more axes, designed for the manufacture of composite airframe and “missile” structures;
c. Equipment designed or modified for the “production” of “fibrous or filamentary materials” as follows:
c.1. Equipment for converting polymeric fibers (such as polyacrylonitrile, rayon or polycarbosilane) including special provision to strain the fiber during heating;
c.2. Equipment for the vapor deposition of elements or compounds on heated filament substrates; and
c.3. Equipment for the wet-spinning of refractory ceramics (such as aluminum oxide);
d. Equipment designed or modified for special fiber surface treatment or for producing prepregs and preforms controlled by 9A110.
Note: Equipment covered in 1B101.d includes but is not limited to, rollers, tension stretchers, coating equipment, cutting equipment and clicker dies.
1B102 Metal powder “production equipment,” other than that specified in 1B002, and components as follows (see List of Items Controlled).
License Requirements
Reason for Control: MT, AT
Control(s) Country Chart
MT applies to entire entry............. MT Column 1
AT applies to entire entry............. AT Column 1
License Exceptions
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: Equipment in number; components in $ value
Related Controls: 1.) See also 1B115.b.
Related Definitions: N/A
Items:
a. Metal power “production equipment usable for the “production,” in a controlled environment, of spherical or atomized materials specified in 1C011.a, 1C011.b, 1C111.a.1, 1C111.a.2, or on the U.S. Munitions List.
b. Specially designed components for “production equipment” specified in 1B002 or 1B102.a.
Note: 1B102 includes:
a. Plasma generators (high frequency arc-jet) usable for obtaining sputtered or spherical metallic powders with organization of the process in an argon-water environment;
b. Electroburst equipment usable for obtaining sputtered or spherical metallic powders with organization of the process in an argon-water environment;
c. Equipment usable for the “production” of spherical aluminum powders by powdering a melt in an inert medium (e.g., nitrogen).
1B115 “Equipment, other than that controlled in 1B002 or 1B102, for the “production” of propellant or propellant constituents, and specially designed components therefor.
License Requirements
Reason for Control: MT, AT
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
MT applies to entire entry............. MT Column 1
AT applies to entire entry............. AT Column 1
------------------------------------------------------------------------
License Exceptions
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: Equipment in number; components in $ value
Related Controls: For the control of batch mixers, continuous mixers and fluid energy mills, see 1B117, 1B118 and 1B119.
Related Definitions: N/A
Items:
a. “Production equipment” for the “production”, handling or acceptance testing of liquid propellants or propellant constituents controlled by 1C011.a, 1C011.b, 1C111 or on the U.S. Munitions List;
b. “Production equipment,” for the production, handling, mixing, curing, casting, pressing, machining, extruding or acceptance testing of solid propellants or propellant constituents described in 1C011.a, 1C011.b or 1C111, or on the U.S. Munitions List.
Note: 1B115.b does not control batch mixers, continuous mixers or fluid energy mills. For the control of batch mixers, continuous mixers and fluid energy mills see 1B117, 1B118, and 1B119.
Note 1: [Reserved]
Note 2: 1B115 does not control equipment for the “production,” handling and acceptance testing of boron carbide.
1B116 Specially designed nozzles for producing pyrolitically derived materials formed on a mold, mandrel or other substrate from precursor gases which decompose in the 1,573 K (1,300 °C) to 3,173 K (2,900 °C) temperature range at pressures of 130 Pa to 20 kPa.
License Requirements
Reason for Control: MT, AT
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
MT applies to entire entry............. MT Column 1
AT applies to entire entry............. AT Column 1
------------------------------------------------------------------------
License Exceptions
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: Equipment in number
Related Controls: N/A
Related Definitions: N/A
Items: The list of items controlled is contained in the ECCN heading
1B117 “Batch mixers with provision for mixing under vacuum in the range from zero to 13.326 kPa and with temperature control capability of the mixing chamber and having all of the following characteristics (see List of Items Controlled), and specially designed components therefor.
License Requirements
Reason for Control: MT, AT.
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
MT applies to entire entry............. MT Column 1.
AT applies to entire entry............. AT Column 1.
------------------------------------------------------------------------
License Exceptions
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: Equipment in number; components in $ value
Related Controls: N/A
Related Definitions: N/A
Items:
a. A total volumetric capacity of 110 liters (30 gallons) or more; and
b. At least one mixing/kneading shaft mounted off center.
1B118 Continuous mixers with provision for mixing under vacuum in the range from zero to 13.326 kPa and with temperature control capability of the mixing chamber and having all of the following characteristics (see List of Items Controlled), and specially designed components therefor.
License Requirements
Reason for Control: MT, AT
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
MT applies to entire entry............. MT Column 1
AT applies to entire entry............. AT Column 1
------------------------------------------------------------------------
License Exceptions
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: Equipment in number; components in $ value
Related Controls: N/A
Related Definitions: N/A
Items:
a. Two or more mixing/kneading shafts; or
b. A single rotating shaft which oscillates and has kneading teeth/pins on the shaft as well as inside the casing of the mixing chamber.
1B119 Fluid energy mills usable for grinding or milling propellant or propellant constituents specified in 1C011.a, 1C011.b or 1C111, or on the U.S. Munitions List, and specially designed components therefor.
License Requirements
Reason for Control: MT, AT
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
MT applies to entire entry............. MT Column 1
AT applies to entire entry............. AT Column 1
------------------------------------------------------------------------
License Exceptions
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: Equipment in number; components in $ value
Related Controls: N/A
Related Definitions: N/A
Items: The list of items controlled is contained in the ECCN heading.
1B201 Filament winding machines, other than those controlled by ECCN 1B001 or 1B101, and related equipment, as follows (see List of Items Controlled).
License Requirements
Reason for Control: NP, AT
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
NP applies to entire entry............. NP Column 1
AT applies to entire entry............. AT Column 1
------------------------------------------------------------------------
License Exceptions
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: $ value
Related Controls: See ECCN 1D201 for software for items controlled by this entry and see ECCNs 1E001 (“development” and “production”) and 1E201 (“use”) for technology for items controlled by this entry. Also see ECCN 1E203 for technology for the “development” of software controlled by ECCN 1D201.
Related Definitions: N/A
Items:
a. Filament winding machines having all of the following characteristics:
a.1. Having motions for positioning, wrapping, and winding fibers coordinated and programmed in two or more axes;
a.2. Specially designed to fabricate composite structures or laminates from “fibrous or filamentary materials”; and
a.3. Capable of winding cylindrical rotors of diameter between 75 mm (3 in.) and 400 mm (16 in.) and lengths of 600 mm (24 in.) or greater;
b. Coordinating and programming controls for filament winding machines controlled by 1B201.a;
c. Precision mandrels for filament winding machines controlled by 1B201.a.
1B225 Electrolytic cells for fluorine production with a production capacity greater than 250 g of fluorine per hour.
License Requirements
Reason for Control: NP, AT
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
NP applies to entire entry............. NP Column 1
AT applies to entire entry............. AT Column 1
------------------------------------------------------------------------
License Exceptions
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: $ value
Related Controls: See ECCNs 1E001 (“development” and “production”) and 1E201 (“use”) for technology for items controlled by this entry.
Related Definitions: N/A
Items: The list of items controlled is contained in the ECCN heading.
1B226 Electromagnetic isotope separators designed for, or equipped with, single or multiple ion sources capable of providing a total ion beam current of 50 mA or greater.
License Requirements
Reason for Control: NP, AT
------------------------------------------------------------------------
Control(s) Country chart
------------------------------------------------------------------------
NP applies to entire entry............. NP Column 1
AT applies to entire entry............. AT Column 1
------------------------------------------------------------------------
License Exceptions
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Unit: $ value
Related Controls: (1) Electromagnetic isotope separators specially designed or prepared for use in separating uranium isotopes are subject to the export licensing authority of the Nuclear Regulatory Commission (see 10 CFR part 110). (2) See ECCNs 1E001 (“development” and “production”) and 1E201 (“use”) for technology for items controlled by this entry.
Related Definitions: N/A
ECCN Controls: This entry includes separators capable of enriching stable isotopes and separators with the ion sources and collectors both in the magnetic field and those configurations in which they are external to the field.
Items: The list of items controlled is contained in the ECCN heading.
1B227Ammonia synthesis converters or ammonia synthesis units in which the synthesis gas (nitrogen and hydrogen) is withdrawn from an ammonia/hydrogen high-pressure exchange column and the synthesized ammonia is returned to that column. (continued)