National United States Regulations 50 CFR PART 260—INSPECTION AND CERTIFICATION Title 50: Wildlife and Fisheries PART 260—INSPECTION AND CERTIFICATION -------------------------------------------------------------------------------- Authority: Sec. 6, 70 Stat. 1122, 16 U.S.C. 742e; secs. 203, 205, 60 Stat. 1087, 1090 as amended; 7 U.S.C. 1622, 1624; Reorganization Plan No. 4 of 1970 (84 Stat. 2090). Source: 31 FR 16052, Dec. 15, 1966, unless otherwise noted. Subpart A—Inspection and Certification of Establishments and Fishery Products for Human Consumption top § 260.1 Administration of regulations. top The Secretary of Commerce is charged with the administration of the regulations in this part except that he may delegate any or all of such functions to any officer or employee of the National Marine Fisheries Service of the Department in his discretion. 1 1 All functions of the Department of Agriculture which pertain to fish, shellfish, and any products thereof, now performed under the authority of title II of the Act of August 14, 1946, popularly known as the Agricultural Marketing Act of 1946, as amended (7 U.S.C. 1621–1627) including but not limited to the development and promulgation of grade standards, the inspection and certification, and improvement of transportation facilities and rates for fish and shellfish and any products thereof, were transferred to the Department of the Interior by the Director of the Budget (23 FR 2304) pursuant to section 6(a) of the Act of Aug. 8, 1956, popularly known as the Fish and Wildlife Act of 1956 (16 U.S.C. 742e). Reorganization Plan No. 4 of 1970 (84 Stat. 2090) transferred, among other things, such functions from the U.S. Department of the Interior to the U.S. Department of Commerce. [36 FR 21037, Nov. 3, 1971] Definitions top § 260.6 Terms defined. top Words in the regulations in this part in the singular form shall be deemed to import the plural and vice versa, as the case may demand. For the purposes of the regulations in this part, unless the context otherwise requires, the following terms shall have the following meanings: Acceptance number. “Acceptance number” means the number in a sampling plan that indicates the maximum number of deviants permitted in a sample of a lot that meets a specific requirement. Act. “Act” means the applicable provisions of the Agricultural Marketing Act of 1946 (60 Stat. 1087 et seq., as amended; 7 U.S.C. 1621 et seq.). Applicant. “Applicant” means any interested party who requests inspection service under the regulations in this part. Case. “Case” means the number of containers (cased or uncased) which, by the particular industry are ordinarily packed in a shipping container. Certificate of loading. “Certificate of loading” means a statement, either written or printed, issued pursuant to the regulations in this part, relative to check-loading of a processed product subsequent to inspection thereof. Certificate of sampling. “Certificate of sampling” means a statement, either written or printed issued pursuant to the regulations in this part, identifying officially drawn samples and may include a description of condition of containers and the condition under which the processed product is stored. Class. “Class” means a grade or rank of quality. Condition. “Condition” means the degree of soundness of the product which may affect its merchantability and includes, but is not limited to those factors which are subject to change as a result of age, improper preparation and processing, improper packaging, improper storage, or improper handling. Department. “Department” means the U.S. Department of Commerce. Deviant. “Deviant” means a sample unit affected by one or more deviations or a sample unit that varies in a specifically defined manner from the requirements of a standard, specification, or other inspection document. Deviation. “Deviation” means any specifically defined variation from a particular requirement. Director. “Director” means the Director of the National Marine Fisheries Service. Establishment. “Establishment” means any premises, buildings, structures, facilities, and equipment (including vehicles) used in the processing, handling, transporting, and storage of fish and fishery products. Inspection certificate. “Inspection certificate” means a statement, either written or printed, issued pursuant to the regulations in this part, setting forth in addition to appropriate descriptive information relative to a processed product, and the container thereof, the quality and condition, or any part thereof, of the product and may include a description of the conditions under which the product is stored. Inspection service. “Inspection service” means: (1) The sampling pursuant to the regulations in this part; (2) The determination pursuant to the regulations in this part of: (i) Essential characteristics such as style, type, size, or identity of any processed product which differentiates between major groups of the same kind; (ii) The class, quality, and condition of any processed product, including the condition of the container thereof by the examination of appropriate samples; (3) The issuance of any certificate of sampling, inspection certificates, or certificates of loading of a processed product, or any report relative to any of the foregoing; or (4) Performance by an inspector of any related services such as to observe the preparation of the product from its raw state through each step in the entire process; or observe conditions under which the product is being harvested, prepared, handled, stored, processed, packed, preserved, transported, or held; or observe sanitation as a prerequisite to the inspection of the processed product, either on a contract basis or periodic basis; or checkload the inspected processed product in connection with the marketing of the product, or any other type of service of a consultative or advisory nature related herewith. Inspector. “Inspector” means any employee of the Department authorized by the Secretary or any other person licensed by the Secretary to investigate, sample, inspect, and certify in accordance with the regulations in this part to any interested party the class, quality and condition of processed products covered in this part and to perform related duties in connection with the inspection service. Interested party. “Interested party” means any person who has a financial interest in the commodity involved. Licensed sampler. “Licensed sampler” means any person who is authorized by the Secretary to draw samples of processed products for inspection service, to inspect for identification and condition of containers in a lot, and may, when authorized by the Secretary, perform related services under the act and the regulations in this part. Lot. “Lot” has the following meanings: (1) For the purpose of charging fees and issuing certificates, “Lot” means any number of containers of the same size and type which contain a processed product of the same type and style located in the same or adjacent warehouses and which are available for inspection at any one time: Provided, That: (i) Processed products in separate piles which differ from each other as to grade or other factors may be deemed to be separate lots; (ii) Containers in a pile bearing an identification mark different from other containers of such processed product in that pile, if determined to be of lower grade or deficient in other factors, may be deemed to be a separate lot; and (iii) If the applicant requests more than one inspection certificate covering different portions of such processed product, the quantity of the product covered by each certificate shall be deemed to be a separate lot. (2) For the purpose of sampling and determining the grade or compliance with a specification, “Lot” means each pile of containers of the same size and type containing a processed product of the same type and style which is separated from other piles in the same warehouse, but containers in the same pile bearing an identification mark different from other containers in that pile may be deemed to be a separate lot. Official establishment. “Official establishment” means any establishment which has been approved by National Marine Fisheries Service, and utilizes inspection service on a contract basis. Officially drawn sample. “Officiallydrawn sample” means any sample that has been selected from a particular lot by an inspector, licensed sampler, or by any other person authorized by the Secretary pursuant to the regulations in this part. Person. “Person” means any individual, partnership, association, business trust, corporation, any organized group of persons (whether incorporated or not), the United States (including, but not limited to, any corporate agencies thereof), any State, county, or municipal government, any common carrier, and any authorized agent of any of the foregoing. Plant. “Plant” means the premises, buildings, structures, and equipment (including, but not being limited to, machines, utensils, and fixtures) employed or used with respect to the manufacture or production of processed products. Processed product. “Processed product” means any fishery product or other food product covered under the regulations in this part which has been preserved by any recognized commercial process, including, but not limited to, canning, freezing, dehydrating, drying, the addition of chemical substances, or by fermentation. Quality. “Quality” means the inherent properties of any processed product which determine the relative degree of excellence of such product, and includes the effects of preparation and processing, and may or may not include the effects of packing media, or added ingredients. Rejection number. “Rejection number” means the number in a sampling plan that indicates the minimum number of deviants in a sample that will cause a lot to fail a specific requirement. Sample. “Sample” means any number of sample units to be used for inspection. Sample unit. “Sample unit” means a container and/or its entire contents, a portion of the contents of a container or other unit of commodity, or a composite mixture of a product to be used for inspection. Sampling. “Sampling” means the act of selecting samples of processed products for the purpose of inspection under the regulations in this part. Secretary. “Secretary” means the Secretary of the Department or any other officer or employee of the Department authorized to exercise the powers and to perform the duties of the Secretary in respect to the matters covered by the regulations in this part. Shipping container. “Shipping container” means an individual container designed for shipping a number of packages or cans ordinarily packed in a container for shipping or designed for packing unpackaged processed products for shipping. Unofficially drawn sample. “Unofficially drawn sample” means any sample that has been selected by any person other than an inspector or licensed sampler, or by any other person not authorized by the Director pursuant to the regulations in this part. Wholesome. “Wholesome” means the minimum basis of acceptability for human food purposes, of any fish or fishery product as defined in section 402 of the Federal Food, Drug, and Cosmetic Act, as amended. [31 FR 16052, Dec. 15, 1966, as amended at 36 FR 21037, Nov. 3, 1971] § 260.7 Designation of official certificates, memoranda, marks, other identifications, and devices for purposes of the Agricultural Marketing Act. top Subsection 203(h) of the Agricultural Marketing Act of 1946 provides criminal penalties for various specified offenses relating to official certificates, memoranda, marks or other identifications and devices for making such marks or identifications, issued or authorized under section 203 of said act, and certain misrepresentations concerning the inspection or grading of agricultural products under said section. For the purposes of said subsection and the provisions in this part, the terms listed below shall have the respective meanings specified: Official certificate. “Official certificate” means any form of certification, either written or printed, including those defined in §260.6, used under this part to certify with respect to the inspection, class, grade, quality, size, quantity, or condition of products (including the compliance of products with applicable specifications). Official device. “Official device” means a stamping appliance, branding device, stencil, printed label, or any other mechanically or manually operated tool that is approved by the Director for the purpose of applying any official mark or other identification to any product or the packaging material thereof. Official identification. “Official identification” means any United States (U.S.) standard designation of class, grade, quality, size, quantity, or condition specified in this part or any symbol, stamp, label, or seal indicating that the product has been graded or inspected and/or indicating the class, grade, quality, size, quantity, or condition of the product approved by the Director and authorized to be affixed to any product, or affixed to or printed on the packaging material of any product. Official mark. “Official mark” means the grade mark, inspection mark, combined form of inspection and grade mark, and any other mark, or any variations in such marks, including those prescribed in §260.86, approved by the Secretary and authorized to be affixed to any product, or affixed to or printed on the packaging material of any product, stating that the product was graded or inspected or both, or indicating the appropriate U.S. Grade or condition of the product, or for the purpose of maintaining the identity of products graded or inspected or both under this part. Official memorandum. “Official memorandum” means any initial record of findings made by an authorized person in the process of grading, inspecting, or sampling pursuant to this part, any processing or plant-operation report made by an authorized person in connection with grading, inspecting, or sampling under this part, and any report made by an authorized person of services performed pursuant to this part. Inspection Service top § 260.12 Where inspection service is offered. top Inspection service may be furnished wherever an inspector or licensed sampler is available and the facilities and conditions are satisfactory for the conduct of such service. § 260.13 Who may obtain inspection service. top An application for inspection service may be made by any interested party, including, but not limited to, the United States and any instrumentality or agency thereof, any State, county, municipality, or common carrier, and any authorized agent in behalf of the foregoing. § 260.14 How to make application. top An application for inspection service may be made to the officer of inspection or to any inspector, at or nearest the place where the service is desired. An up-to-date list of the Inspection Field Offices of the Department may be obtained upon request to the Director. Satisfactory proof that the applicant is an interested party shall be furnished. § 260.15 Information required in connection with application. top Application for inspection service shall be made in the English language and may be made orally (in person or by telephone), in writing, or by telegraph. If an application for inspection service is made orally, such application shall be confirmed promptly in writing. In connection with each application for inspection service, there shall be furnished such information as may be necessary to perform an inspection on the processed product for which application for inspection is made, including but not limited to, the name of the product, name and address of the packer or plant where such product was packed, the location of the product, its lot or car number, codes or other identification marks, the number of containers, the type and size of the containers, the interest of the applicant in the product, whether the lot has been inspected previously to the application by any Federal agency and the purpose for which inspection is desired. § 260.16 Filing of application. top An application for inspection service shall be regarded as filed only when made in accordance with the regulations in this part. § 260.17 Record of filing time. top A record showing the date and hour when each application for inspection or for an appeal inspection is received shall be maintained. § 260.18 When application may be rejected. top An application for inspection service may be rejected by the Secretary (a) for noncompliance by the applicant with the regulations in this part, (b) for nonpayment for previous inspection services rendered, (c) when the product is not properly identifiable by code or other marks, or (d) when it appears that to perform the inspection service would not be to the best interests of the Government. Such applicant shall be promptly notified of the reason for such rejection. § 260.19 When application may be withdrawn. top An application for inspection service may be withdrawn by the applicant at any time before the inspection is performed: Provided, That, the applicant shall pay at the hourly rate prescribed in §260.70 for the time incurred by the inspector in connection with such application, any travel expenses, telephone, telegraph or other expenses which have been incurred by the inspection service in connection with such application. [31 FR 16052, Dec. 15, 1966, as amended at 36 FR 18738, Sept. 21, 1971] § 260.20 Disposition of inspected sample. top Any sample of a processed product that has been used for inspection may be returned to the applicant, at his request and expense; otherwise it shall be destroyed, or disposed of to a charitable institution. § 260.21 Basis of inspection and grade or compliance determination. top (a) Inspection service shall be performed on the basis of the appropriate U.S. standards for grades of processed products, Federal, Military, Veterans Administration or other government agency specifications, written contract specification, or any written specification or instruction which is approved by the Secretary. (b) Unless otherwise approved by the Director compliance with such grade standards, specifications, or instructions shall be determined by evaluating the product, or sample, in accordance with the requirements of such standards, specifications, or instructions: Provided, That when inspection for quality is based on any U.S. grade standard which contains a scoring system the grade to be assigned to a lot is the grade indicated by the average of the total scores of the sample units: Provided further, That: (1) Such sample complies with the applicable standards of quality promulgated under the Federal Food, Drug, and Cosmetic Act; (2) Such sample complies with the product description; (3) Such sample meets the indicated grade with respect to factors of quality which are not rated by score points; and (4) With respect to those factors of quality which are rated by score points, each of the following requirements is met: (i) None of the sample units falls more than one grade below the indicated grade because of any quality factor to which a limiting rule applies; (ii) None of the sample units falls more than 4 score points below the minimum total score for the indicated grade; and (iii) The number of sample units classed as deviants does not exceed the applicable acceptance number indicated in the sampling plans contained in §260.61. A “deviant,” as used in this paragraph, means a sample unit that falls into the next grade below the indicated grade but does not score more than 4 points below the minimum total score for the indicated grade. (5) If any of the provisions contained in paragraphs (b)(3) and (4) of this section are not met the grade is determined by considering such provisions in connection with succeedingly lower grades until the grade of the lot, if assignable, is established. § 260.22 Order of inspection service. top Inspection service shall be performed, insofar as practicable, in the order in which applications therefor are made except that precedence may be given to any such applications which are made by the United States (including, but not being limited to, any instrumentality or agency thereof) and to any application for an appeal inspection. § 260.23 Postponing inspection service. top If the inspector determines that it is not possible to accurately ascertain the quality or condition of a processed product immediately after processing because the product has not reached equilibrium in color, or drained weight, or for any other substantial reason, he may postpone inspection service for such period as may be necessary. § 260.24 Financial interest of inspector. top No inspector shall inspect any processed product in which he is directly or indirectly financially interested. § 260.25 Forms of certificates. top Inspection certificates, certificates of sampling or loading, and other memoranda concerning inspection service shall be issued on forms approved by the Secretary. § 260.26 Issuance of certificates. top (a) An inspection certificate may be issued only by an inspector: Provided, That, another employee of the inspection service may sign any such certificate covering any processed product inspected by an inspector when given power of attorney by such inspector and authorized by the Secretary, to affix the inspector's signature to an inspection certificate which has been prepared in accordance with the facts set forth in the notes, made by the inspector, in connection with the inspection. (b) A certificate of loading shall be issued and signed by the inspector or licensed sampler authorized to check the loading of a specific lot of processed products: Provided, That, another employee of the inspection service may sign such certificate of loading covering any processed product checkloaded by an inspector or licensed sampler when given power of attorney by such inspector or licensed sampler and authorized by the Secretary to affix the inspector's or licensed sampler's signature to a certificate of loading which has been prepared in accordance with the facts set forth in the notes made by the inspector or licensed sampler in connection with the checkloading of a specific lot of processed products. § 260.27 Issuance of corrected certificates. top A corrected inspection certificate may be issued by the inspector who issued the original certificate after distribution of a certificate if errors, such as incorrect dates, code marks, grade statements, lot or car numbers, container sizes, net or drained weights, quantities, or errors in any other pertinent information require the issuance of a corrected certificate. Whenever a corrected certificate is issued, such certificate shall supersede the inspection certificate which was issued in error and the superseded certificate shall become null and void after the issuance of the corrected certificate. § 260.28 Issuance of an inspection report in lieu of an inspection certificate. top A letter report in lieu of an inspection certificate may be issued by an inspector when such action appears to be more suitable than an inspection certificate: Provided, That, the issuance of such report is approved by the Secretary. § 260.29 Disposition of inspection certificates. top The original of any inspection certificate, issued under the regulations in this part, and not to exceed four copies thereof, if requested prior to issuance, shall be delivered or mailed promptly to the applicant, or person designated by the applicant. All other copies shall be filed in such manner as the Secretary may designate. Additional copies of any such certificates may be supplied to any interested party as provided in §260.78. § 260.30 Report of inspection results prior to issuance of formal report. top Upon request of any interested party, the results of an inspection may be telegraphed or telephoned to him, or to any other person designated by him, at his expense. Appeal Inspection top § 260.36 When appeal inspection may be requested. top An application for an appeal inspection may be made by any interested party who is dissatisfied with the results of an inspection as stated in an inspection certificate, if the lot of processed products can be positively identified by the inspection service as the lot from which officially drawn samples were previously inspected. Such application shall be made within thirty (30) days following the day on which the previous inspection was performed, except upon approval by the Secretary the time within which an application for appeal inspection may be made, may be extended. § 260.37 Where to file for an appeal inspection and information required. top (a) Application for an appeal inspection may be filed with: (1) The inspector who issued the inspection certificate on which the appeal covering the processed product is requested; or (2) The inspector in charge of the office of inspection at or nearest the place where the processed product is located. (b) The application for appeal inspection shall state the location of the lot of processed products and the reasons for the appeal; and date and serial number of the certificate covering inspection of the processed product on which the appeal is requested, and such application may be accompanied by a copy of the previous inspection certificate and any other information that may facilitate inspection. Such application may be made orally (in person or by telephone), in writing, or by telegraph. If made orally, written confirmation shall be made promptly. § 260.38 When an application for an appeal inspection may be withdrawn. top An application for appeal inspection may be withdrawn by the applicant at any time before the appeal inspection is performed: Provided, That the applicant shall pay at the hourly rate prescribed in §260.70, for the time incurred by the inspector in connection with such application, any travel expenses, telephone, telegraph, or other expenses which have been incurred by the inspection service in connection with such application. [31 FR 16052, Dec. 15, 1966, as amended at 36 FR 18738, Sept. 21, 1971] § 260.39 When appeal inspection may be refused. top An application for an appeal inspection may be refused if: (a) The reasons for the appeal inspection are frivolous or not substantial; (b) The quality or condition of the processed product has undergone a material change since the inspection covering the processed product on which the appeal inspection is requested; (c) The lot in question is not, or cannot be made accessible for the selection of officially drawn samples; (d) The lot relative to which appeal inspection is requested cannot be positively identified by the inspector as the lot from which officially drawn samples were previously inspected; or (e) There is noncompliance with the regulations in this part. Such applicant shall be notified promptly of the reason for such refusal. § 260.40 Who shall perform appeal inspection. top An appeal inspection shall be performed by an inspector or inspectors (other than the one from whose inspection the appeal is requested) authorized for this purpose by the Secretary and, whenever practical, such appeal inspection shall be conducted jointly by two such inspectors: Provided, That the inspector who made the inspection on which the appeal is requested may be authorized to draw the samples when another inspector or licensed sampler is not available in the area where the product is located. § 260.41 Appeal inspection certificate. top After an appeal inspection has been completed, an appeal inspection certificate shall be issued showing the results of such appeal inspection; and such certificate shall supersede the inspection certificate previously issued for the processed product involved. Each appeal inspection certificate shall clearly identify the number and date of the inspection certificate which it supersedes. The superseded certificate shall become null and void upon the issuance of the appeal inspection certificate and shall no longer represent the quality or condition of the processed product described therein. The inspector or inspectors issuing an appeal inspection certificate shall forward notice of such issuance to such persons as he considers necessary to prevent misuse of the superseded certificate if the original and all copies of such superseded certificate have not previously been delivered to the inspector or inspectors issuing the appeal inspection certificate. The provisions in the regulations in this part concerning forms of certificates, issuance of certificates, and disposition of certificates shall apply to appeal inspection certificates, except that copies of such appeal inspection certificates shall be furnished all interested parties who received copies of the superseded certificate. Licensing of Samplers and Inspectors top § 260.47 Who may become licensed sampler. top Any person deemed to have the necessary qualifications may be licensed as a licensed sampler to draw samples for the purpose of inspection under the regulations in this part. Such a license shall bear the printed signature of the Secretary, and shall be countersigned by an authorized employee of the Department. Licensed samplers shall have no authority to inspect processed products under the regulations in this part except as to identification and condition of the containers in a lot. A licensed sampler shall perform his duties pursuant to the regulations in this part as directed by the Director. § 260.48 Application to become a licensed sampler. top Application to become a licensed sampler shall be made to the Secretary on forms furnished for that purpose. Each such application shall be signed by the applicant in his own handwriting, and the information contained therein shall be certified by him to be true, complete, and correct to the best of his knowledge and belief, and the application shall contain or be accompanied by: (a) A statement showing his present and previous occupations, together with names of all employers for whom he has worked, with periods of service, during the 10 years previous to the date of his application; (b) A statement that, in his capacity as a licensed sampler, he will not draw samples from any lot of processed products with respect to which he or his employer is an interested party; (c) A statement that he agrees to comply with all terms and conditions of the regulations in this part relating to duties of licensed samplers; and (d) Such other information as may be requested. § 260.49 Inspectors. top Inspections will ordinarily be performed by employees under the Secretary who are employed as Federal Government employees for that purpose. However, any person employed under any joint Federal-State inspection service arrangement may be licensed, if otherwise qualified, by the Secretary to make inspections in accordance with this part on such processed products as may be specified in his license. Such license shall be issued only in a case where the Secretary is satisfied that the particular person is qualified to perform adequately the inspection service for which such person is to be licensed. Each such license shall bear the printed signature of the Secretary and shall be countersigned by an authorized employee of the Department. An inspector shall perform his duties pursuant to the regulations in this part as directed by the Director. § 260.50 Suspension or revocation of license of licensed sampler or licensed inspector. top Pending final action by the Secretary, the Director may, whenever he deems such action necessary, suspend the license of any licensed sampler, or licensed inspector, issued pursuant to the regulations in this part, by giving notice of such suspension to the respective licensee, accompanied by a statement of the reasons therefor. Within 7 days after the receipt of the aforesaid notice and statement of reasons by such licensee, he may file an appeal, in writing, with the Secretary supported by any argument or evidence that he may wish to offer as to why his license should not be suspended or revoked. After the expiration of the aforesaid 7 day period and consideration of such argument and evidence, the Secretary shall take such action as he deems appropriate with respect to such suspension or revocation. § 260.51 Surrender of license. top Upon termination of his services as a licensed sampler or licensed inspector, or suspension or revocation of his license, such licensee shall surrender his license immediately to the office of inspection serving the area in which he is located. These same provisions shall apply in a case of an expired license. Sampling top § 260.57 How samples are drawn by inspectors or licensed samplers. top An inspector or a licensed sampler shall select samples, upon request, from designated lots of processed products which are so placed as to permit thorough and proper sampling in accordance with the regulations in this part. Such person shall, unless otherwise directed by the Secretary, select sample units of such products at random, and from various locations in each lot in such manner and number, not inconsistent with the regulations in this part, as to secure a representative sample of the lot. Samples drawn for inspection shall be furnished by the applicant at no cost to the Department. § 260.58 Accessibility for sampling. top Each applicant shall cause the processed products for which inspection is requested to be made accessible for proper sampling. Failure to make any lot accessible for proper sampling shall be sufficient cause for postponing inspection service until such time as such lot is made accessible for proper sampling. § 260.59 How officially drawn samples are to be identified. top Officially drawn samples shall be marked by the inspector or licensed sampler so such samples can be properly identified for inspection. § 260.60 How samples are to be shipped. top Unless otherwise directed by the Secretary, samples which are to be shipped to any office of inspection shall be forwarded to the office of inspection serving the area in which the processed prodcuts from which the samples were drawn is located. Such samples shall be shipped in a manner to avoid, if possible, any material change in the quality or condition of the sample of the processed product. All transportation charges in connection with such shipments of samples shall be at the expense of the applicant and wherever practicable, such charges shall be prepaid by him. § 260.61 Sampling plans and procedures for determining lot compliance. top (a) Except as otherwise provided for in this section in connection with in-plant inspection and unless otherwise approved by the Secretary, samples shall be selected from each lot in the exact number of sample units indicated for the lot size in the applicable single sampling plan or, at the discretion of the inspection service, any comparable multiple sampling plan: Provided, That at the discretion of the inspection service the number of sample units selected may be increased to the exact number of sample units indicated for any one of the larger sample sizes provided for in the appropriate plans. (b) Under the single sampling plans with respect to any specified requirement: (1) If the number of deviants (as defined in connection with the specific requirements) in the sample does not exceed the acceptance number prescribed for the sample size the lot meets the requirement; (2) If the number of deviants (as defined in connection with the specific requirement) in the sample exceeds the acceptance number prescribed for the sample size the lot fails the requirement. (c) Under the multiple sampling plans inspection commences with the smallest sample size indicated under the appropriate plan and with respect to any specified requirement: (1) If the number of deviants (as defined in connection with the specific requirement) in the sample being considered does not exceed the acceptance number prescribed for that sample size the lot meets the requirement; (2) If the number of deviants (as defined in connection with the specific requirement) in the sample being considered equals or exceeds the rejection number prescribed for that sample size the lot fails the requirement; or (3) If the number of deviants (as defined in connection with the specific requirement) in the sample being considered falls between the acceptance and rejection numbers of the plan, additional sample units are added to the sample so that the sample thus cumulated equals the next larger cumulative sample size in the plan. It may then be determined that the lot meets or fails the specific requirement by considering the cumulative sample and applying the procedures outlined in paragraphs (c)(1) and (2) of this section or by considering successively larger samples cumulated in the same manner until the lot meets or fails the specific requirement. (d) If in the conduct of any type of in-plant inspection the sample is examined before the lot size is known and the number of sample units exceeds the prescribed sample size for such lot but does not equal any of the prescribed larger sample sizes the lot may be deemed to meet or fail a specific requirement in accordance with the following procedure: (1) If the number of deviants (as defined in connection with the specific requirement) in the nonprescribed sample does not exceed the acceptance number of the next smaller sample size the lot meets the requirements; (2) If the number of deviants (as defined in connection with the specific requirement) in the nonprescribed sample equals the acceptance number prescribed for the next larger sample size additional sample units shall be selected to increase the sample to the next larger prescribed sample size; (3) If the number of deviants (as defined in connection with the specific requirement) in the nonprescribed sample exceeds the acceptance number prescribed for the next larger sample size the lot fails the requirement. (e) In the event that the lot compliance determination provisions of a standard or specification are based on the number of specified deviations instead of deviants the procedures set forth in this section may be applied by substituting the word “deviation” for the word “deviant” wherever it appears. (f) Sampling plans referred to in this section are those contained in Tables I, II, III, IV, V, and VI which follow or any other plans which are applicable. For processed products not included in these tables, the minimum sample size shall be the exact number of sample units prescribed in the table, container group, and lot size that, as determined by the inspector, most closely resembles the product, type, container size and amount of product to be samples. Single Sampling Plans and Acceptance Levels Table I_Canned or Similarly Processed Fishery Products, and Products Thereof Containing Units of Such Size and Character as to be Readily Separable ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Lot size (number of containers) Container size group ------------------------------------------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ group 1 Any type of container of less volume than 3,600 or less 3,601-14,400 14,401-48,000 48,001-96,000 156,001-228,000 228,001-300,000 300,001-420,000 Over 420,000 that of a No. 300 size can (300x407).... 96,001-156,000 group 2 Any type of container of a volume equal 2,400 or less 2,401-12,000 12,001-24,000 24,001-48,000 72,001-108,000 108,001-168,000 168,001-240,000 Over 240,000 to or exceeding that of a No. 300 size 48,001-72,000 can, but not exceeding that of a No. 3 cylinder size can (404x700)............. group 3 Any type of container of a volume 1,200 or less 1,201-7,200 7,201-15,000 15,001-24,000 24,001-36,000 36,001-60,000 60,001-84,000 84,001-120,000 Over 120,000 exceeding that of a No. 3 cylinder size can, but not exceeding that of a No. 12 size can (603x812)...................... group 4 Any type of container of a volume 200 or less 201-800 801-1,600 1,601-2,400 2,401-3,600 3,601-8,000 8,001-16,000 16,001-28,000 exceeding that of a No. 12 size can, but Over 28,000 not exceeding that of a 5-gallon container............................... group 5 Any type of container of a volume 25 or less 26-80 81-200 201-400 401-800 801-1,200 1,201-2,000 2,001-3,200 Over 3,200 exceeding that of a 5-gallon container.. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Single sampling plans \1\ -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Sample size 3................................................................. 6 13 21 29 38 48 60 72 (number of sample units) \2\ Acceptance 0................................................................. 1 2 3 4 5 6 7 number ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- \1\ For extension of the single sample sizes beyond 72 sample units, refer to table V of this section; for multiple sampling plans comparable to the various single sampling plans refer to table VI of this section. \2\ The sample units for the various container size groups are as follows: Groups 1, 2, and 3_1 container and its entire contents. Groups 4 and 5_approximately 2 pounds of product. When determined by the inspector that a 2-pound sample unit is inadequate, a larger sample unit may be substituted. Table II_Frozen or Similarly Processed Fishery Products, and Products Thereof Containing Units of Such Size and Character as to be Readily Separable ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Lot size (number of containers) Container size group ------------------------------------------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ group 1 Any type of container of 1 pound or less 2,400 or less 2,401-12,000 12,001-24,000 24,001-48,000 48,001-72,000 72,001-108,000 108,001-168,000 168,001-240,000 Over 240,000 net weight.............................. group 2 Any type of container over 1 pound but 1,800 or less 1,801-8,400 8,401-18,000 18,001-36,000 36,001-60,000 60,001-96,000 96,001-132,000 132,001-168,000 Over 168,000 not over 4 pounds net weight............ group 3 Any type of container over 4 pounds but 900 or less 901-3,600 3,601-10,800 10,801-18,000 18,001-36,000 36,001-60,000 60,001-84,000 84,001-120,000 Over 120,000 not over 10 pounds net weight........... group 4 Any type of container over 10 pounds but 200 or less 201-800 801-1,600 1,601-2,400 2,401-3,600 3,601-8,000 8,001-16,000 16,001-28,000 Over 28,000 not over 100 pounds net weight.......... group 5 Any type of container over 100 pounds net 25 or less 26-80 81-200 201-400 401-800 801-1,200 1,201-2,000 2,001-3,200 Over 3,200 weight.................................. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Single sampling plans \1\ ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Sample size (number of sample units) \2\. 3 6 13 21 29 38 48 60 72 Acceptance number........................ 0 1 2 3 4 5 6 7 8 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ \1\ For extension of the single sample sizes beyond 72 sample units, refer to table V of this section; for multiple sampling plans comparable to the various single sampling plans refer to table VI of this section. \2\ The sample units for the various container size groups are as follows: Groups 1, 2, and 3_1 container and its entire contents. Groups 4 and 5_approximately 3 pounds of product. When determined by the inspector that a 3-pound sample unit is inadequate, a larger sample unit or 1 or more containers and their entire contents may be substituted for 1 or more sample units of 3 pounds. Table III_Canned, Frozen, or Otherwise Processed Fishery and Related Products, and Products Thereof of a Comminuted, Fluid, or Homogeneous State ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Lot size (number of containers) Container size group \1\ -------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ group 1 Any type of container of 12 ounces or less... 5,400 or 5,401-21,600 21,601-62,400 62,401-112,000 112,001-174,000 174,001-240,000 240,001-360,000 360,001-480,000 Over 480,000 less group 2 Any type of container over 12 ounces but not 3,600 or 3,601-14,400 14,401-48,000 48,001-96,000 96,001-156,000 156,001-228,000 228,001-300,000 300,001-420,000 Over 420,000 over 60 ounces.............................. less group 3 Any type of container over 60 ounces but not 1,800 or 1,801-8,400 8,401-18,000 18,001-60,000 36,001-60,000 60,001-96,000 96,001-132,000 132,001-168,000 Over 168,000 over 160 ounces............................. less group 4 Any type of container over 160 ounces but not 200 or less 201-800 801-1,600 1,601-3,200 3,201-8,000 8,001-16,000 16,001-24,000 24,001-32,000 Over 32,000 over 10 gallons or 100 pounds whichever is applicable.................................. group 5 Any type of container over 10 gallons or 100 25 or less 26-80 81-200 201-400 401-800 801-1,200 1,201-2,000 2,001-3,200 Over 3,200 pounds whichever is applicable.............. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Single sampling plans \2\ ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Sample size (number of sample units) \3\..... 3 6 13 21 29 38 48 60 72 Acceptance number............................ 0 1 2 3 4 5 6 7 8 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ \1\ Ounces pertain to either fluid ounces of volume or avoirdupois ounces of net weight whichever is applicable for the product involved. \2\ For extension of the single sample sizes beyond 72 sample units, refer to table V of this section; for multiple sampling plans comparable to the various single sampling plans refer to table VI of this section. \3\ The sample units for the various container size groups are as follows: Groups 1, 2, and 3_1 container and its entire contents. A smaller sample unit may be substituted in group 3 at the inspector's discretion. Groups 4, 5, and 6_approximately 16 ounces of product. When determined by the inspector that a 16-ounce sample unit is inadequate, a larger sample unit may be substituted. Table IV_Dehydrated Fishery and Related Products ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Lot size (number of containers) Container size group ------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ group 1 Any type of container of 1 pound or less 1,800 or less 1,801-8,400 8,401-18,000 18,001-36,000 36,001-60,000 60,001-96,000 96,001-132,000 132,001-168,000 Over 168,000 net weight............................. group 2 Any type of container over 1 pound but 900 or less 901-3,600 3,601-10,800 10,801-18,000 18,001-36,000 36,001-60,000 60,001-84,000 84,001-120,000 Over 120,000 not over 6 pounds net weight........... group 3 Any type of container over 6 pounds but 200 or less 201-800 801-1,600 1,601-3,200 3,201-8,000 8,001-16,000 16,001-24,000 24,001-32,000 Over 32,000 not over 20 pounds net weight.......... group 4 Any type of container over 20 pounds but 48 or less 49-400 401-1,200 1,201-2,000 2,001-2,800 2,801-6,000 6,001-9,600 9,601-15,000 Over 15,000 not over 100 pounds net weight......... group 5 Any type of container over 100 pounds 16 or less 17-80 81-200 201-400 401-800 801-1,200 1,201-2,000 2,001-3,200 Over 3,200 net weight............................. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Single sampling plans \1\ ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Sample size (number of sample units) \2\ 3 6 13 21 29 38 48 60 72 Acceptance number....................... 0 1 2 3 4 5 6 7 8 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ \1\ For extension of the single sample sizes beyond 72 sample units, refer to table V of this section; for multiple sampling plans comparable to the various single sampling plans refer to table VI of this section. \2\ The sample units for the various container size groups are as follows: Group 1_1 container and its entire contents. Groups 2, 3, 4, and 5_1 container and its entire contents or a smaller sample unit when determined by the inspector to be adequate. Table V_Single Sampling Plans for Use in Increasing Sample Size Beyond 72 Sample Units Sample size, n..................................................... 84 96 108 120 132 144 156 168 180 192 204 216 230 244 258 272 286 300 314 328 342 356 370 384 400 Acceptance numbers, c.............................................. 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Multiple Sampling Plans \1\ Table VI_Multiple Sampling Plans Comparable to the Indicated Single Sampling Plans -------------------------------------------------------------------------------------------------------------------------------------------------------- Indicated single sampling plan: Single sample size, n......... ... 6 ... ... 13 ... ... 21 ... ... 29 ... ... 38 ... ... 48 ... ... 60 ... ... 72 ----------------------------------------------------------------------------------------------------------------------- Acceptance numbers, c......... ... 1 ... ... 2 ... ... 3 ... ... 4 ... ... 5 ... ... 6 ... ... 7 ... ... 8 -------------------------------------------------------------------------------------------------------------------------------------------------------- Cumulative sample sizes, nc, and nc c r nc c r nc c r nc c r nc c r nc c r nc c r nc c r acceptance numbers, c, and rejection numbers, r, 4 0 2 8 0 3 10 0 3 12 0 4 14 0 4 16 0 4 18 0 5 22 0 5 for multiple sampling. 6 0 2 10 0 3 14 1 4 16 0 4 20 0 5 24 1 5 28 1 6 32 1 7 8 1 2 12 1 3 18 1 4 20 1 5 26 1 6 32 2 6 38 2 7 42 2 8 ... ... ... 14 2 3 22 2 5 24 2 5 32 2 6 40 3 8 48 3 8 52 3 9 ... ... ... ... ... ... 26 4 5 28 3 6 38 3 7 48 4 8 58 4 8 62 5 10 ... ... ... ... ... ... ... ... ... 32 3 6 44 6 7 56 7 8 68 8 9 72 6 10 ... ... ... ... ... ... ... ... ... 36 5 6 ... ... ... ... ... ... ... ... ... 82 9 10 \1\ These multiple sampling plans may be used in lieu of the single sampling plans listed at the heading of each column. § 260.62 Issuance of certificate of sampling. top Each inspector and each licensed sampler shall prepare and sign a certificate of sampling to cover the samples drawn by the respective person, except that an inspector who inspects the samples which he has drawn need not prepare a certificate of sampling. One copy of each certificate of sampling prepared shall be retained by the inspector or licensed sampler (as the case may be) and the original and all other copies thereof shall be disposed of in accordance with the instructions of the Secretary. § 260.63 Identification of lots sampled. top Each lot from which officially drawn samples are selected shall be marked in such manner as may be prescribed by the Secretary, if such lots do not otherwise possess suitable identification. Fees and Charges top § 260.69 Payment fees and charges. top Fees and charges for any inspection service shall be paid by the interested party making the application for such service, in accordance with the applicable provisions of the regulations in this part, and, if so required by the person in charge of the office of inspection serving the area where the services are to be performed, an advance of funds prior to rendering inspection service in an amount suitable to the Secretary, or a surety bond suitable to the Secretary, may be required as a guarantee of payment for the services rendered. All fees and charges for any inspection service, performed pursuant to the regulations in this part shall be paid by check, draft, or money order made payable to the National Marine Fisheries Service. Such check, draft, or money order shall be remitted to the appropriate regional or area office serving the geographical area in which the services are performed, within ten (10) days from the date of billing, unless otherwise specified in a contract between the applicant and the Secretary, in which latter event the contract provisions shall apply. [36 FR 21038, Nov. 3, 1971] § 260.70 Schedule of fees. top (a) Unless otherwise provided in a written agreement between the applicant and the Secretary, the fees to be charged and collected for any inspection service performed under the regulations in this part at the request of the United States, or any other agency or instrumentality thereof, will be published as a notice in the Federal Register and will be in accordance with §260.81. (b) Fees are reviewed annually to ascertain that the hourly fees charged are adequate to recover the costs of the services rendered. (1) The TYPE I (Contract Inspection) hourly fee is determined by dividing the estimated annual costs by the estimated annual billable hours. (2) The TYPE II (Lot Inspection) hourly fee is determined by adding a factor of 50 percent to the TYPE I fee, to cover additional costs (down-time, etc.) associated with conducting lot inspection services. (3) The TYPE III (Miscellaneous and Consulting) hourly fee is determined by adding a factor of 25 percent to the TYPE I fee, to cover the additional costs (down-time, etc.) associated with conducting miscellaneous inspection services. [48 FR 24901, June 3, 1983] § 260.71 [Reserved] top § 260.72 Fees for inspection service performed under cooperative agreement. top The fees to be charged and collected for any inspection or similar service performed under cooperative agreement shall be those provided for by such agreement. § 260.73 Disposition of fees for inspections made under cooperative agreement. top Fees for inspection under a cooperative agreement with any State or person shall be disposed of in accordance with the terms of such agreement. Such portion of the fees collected under a cooperative agreement as may be due the United States shall be remitted in accordance with §260.69. § 260.74 Fee for appeal inspection. top The fee to be charged for an appeal inspection shall be at the rates prescribed in this part for other inspection services: Provided, That, if the result of any appeal inspection made for any applicant, other than the United States or any agency or instrumentality thereof, discloses that a material error was made in the inspection on which the appeal is made, no inspection fee shall be assessed. § 260.76 [Reserved] top § 260.77 Fees for score sheets. top If the applicant for inspection service requests score sheets showing in detail the inspection of each container or sample inspected and listed thereon, such score sheets may be furnished by the inspector in charge of the office of inspection serving the area where the inspection was performed; and such applicant shall be changed at the rate of $2.75 for each 12 sampled units, or fraction thereof, inspected and listed on such score sheets. § 260.78 Fees for additional copies of inspection certificates. top Additional copies of any inspection certificate other than those provided for in §260.29, may be supplied to any interested party upon payment of a fee of $2.75 for each set of five (5) or fewer copies. § 260.79 Travel and other expenses. top Charges may be made to cover the cost of travel and other expenses incurred in connection with the performance of any inspection service, including appeal inspections: Provided, That, if charges for sampling or inspection are based on an hourly rate, an additional hourly charge may be made for travel time including time spent waiting for transportation as well as time spent traveling, but not to exceed 8 hours of travel time for any one person for any one day: And provided further, That, if travel is by common carrier, no hourly charge may be made for travel time outside the employee's official work hours. § 260.80 Charges for inspection service on a contract basis. top Irrespective of fees and charges prescribed in the foregoing sections, the Secretary may enter into a written memorandum of understanding or contract, whichever may be appropriate, with any administrative agency charged with the administration of a marketing order effective pursuant to the Agricultural Marketing Agreement Act of 1937, as revised (16 U.S.C. 661 et seq.) for the making of inspections pursuant to said agreement or order on such basis as will reimburse the National Marine Fisheries Service of the Department for the full cost of rendering such inspection service as may be determined by the Secretary. Likewise, the Secretary may enter into a written memorandum of understanding or contract, whichever may be appropriate, with an administrative agency charged with the administration of a similar program operated pursuant to the laws of any State. [36 FR 21038, Nov. 3, 1971] § 260.81 Readjustment and increase in hourly rates of fees. top (a) When Federal Pay Act increases occur, the hourly rates for inspection fees will automatically be increased on the effective date of the pay act by an amount equal to the increase received by the average GS grade level of fishery product inspectors receiving such pay increases. (b) The hourly rates of fees to be charged for inspection services will be subject to review and reevaluation for possible readjustment not less than every 3 years: Provided, That, the hourly rates of fees to be charged for inspection services will be immediately reevaluated as to need for readjustment with each Federal Pay Act increase. [35 FR 15925, Oct. 9, 1970] Miscellaneous top § 260.84 Policies and procedures. top The policies and procedures pertaining to any of the inspection services are contained within the NMFS Fishery Products Inspection Manual. The policies and procedures are available from the Secretary to any interested party by writing to Document Approval and Supply Services Branch, Inspection Services Division, P.O. Drawer 1207, 3207 Frederic St., Pascagoula, MS 39568–1207. [61 FR 9369, Mar. 8, 1996] § 260.86 Approved identification. top (a) Grade marks: The approved grade mark or identification may be used on containers, labels, or otherwise indicated for any processed product that: (1) Has been packed under inspection as provided in this part to assure compliance with the requirements for wholesomeness established for the raw product and of sanitation established for the preparation and processing operations, and (2) has been certified by an inspector as meeting the requirements of such grade, quality or classification. The grade marks approved for use shall be similar in form and design to the examples of Figures 1 to 5 of this section. Shield using red, white, and blue background or other colors appropriate for label. Figure 1 View or download PDF Shield with plain background. Figure 2 View or download PDF Figure 3 View or download PDF Figure 4 View or download PDF Figure 5 View or download PDF (b) Inspection marks: The approved inspection marks may be used on containers, labels, or otherwise indicated for any processed product that: (1) Has been packed under inspection as provided in this part to assure compliance with the requirements for wholesomeness established for the raw product and of sanitation established for the preparation and processing operations, and (2) has been certified by an inspector as meeting the requirements of such quality or grade classification as may be approved by the Secretary. The inspection marks approved for use shall be similar in form and design to the examples in Figures 6, 7, and 8 of this section. Statement enclosed within a circle. Figure 6 View or download PDF Statement without the use of the circle. Figure 7 View or download PDF Statement without the use of the circle. Figure 8 View or download PDF (c) Combined grade and inspection marks: The grade marks set forth in paragraph (a) of this section, and the inspection marks, Figures 7 and 8, set forth in paragraph (b) of this section, may be combined into a consolidated grade and inspection mark for use on processed products that have been packed under inspection as provided in this part. (d) Products not eligible for approved identification: Processed products which have not been packed under inspection as provided in this part shall not be identified by approved grade or inspection marks, but such products may be inspected on a lot inspection basis as provided in this part and identified by an authorized representative of the Department by stamping the shipping cases and inspection certificate(s) covering such lot(s) as appropriate, with marks similar in form and design to the examples in Figures 9 and 10 of this section. Figure 9 View or download PDF Figure 10 View or download PDF (e) Removal of labels bearing inspection marks: At the time a lot of fishery products is found to be mislabeled and the labels on the packages are not removed within ten (10) consecutive calendar days, the following procedure shall be applicable: (1) The processor, under the supervision of the inspector, shall clearly and conspicuously mark all master cases in the lot by means of a “rejected by USDC Inspector” stamp provided by the Department. (2) The processor shall be held accountable to the Department for all mislabeled products until the products are properly labeled. (3) Clearance for the release of the relabeled products shall be obtained by the processor from the inspector. (f) Users of inspection services having an inventory of labels which bear official approved identification marks stating “U.S. Department of the Interior” or otherwise referencing the Interior Department, will be permitted to use such marks until December 31, 1971, except that upon written request the Director, National Marine Fisheries Service, may extend such period for the use of specific labels. [36 FR 4609, Mar. 10, 1971] § 260.88 Political activity. top All inspectors and licensed samplers are forbidden, during the period of their respective appointments or licenses, to take an active part in political management or in political campaigns. Political activities in city, county, State, or national elections, whether primary or regular, or in behalf of any party or candidate, or any measure to be voted upon, are prohibited. This applies to all appointees or licensees, including, but not limited to, temporary and cooperative employees and employees on leave of absence with or without pay. Willful violation of this section will constitute grounds for dismissal in the case of appointees and revocation of licenses in the case of licensees. § 260.90 Compliance with other laws. top None of the requirements in the regulations in this part shall excuse failure to comply with any Federal, State, county, or municipal laws applicable to the operation of food processing establishments and to processed food products. § 260.91 Identification. top Each inspector and licensed sampler shall have in his possession at all times and present upon request, while on duty, the means of identification furnished by the Department to such person. § 260.93 Debarment and suspension. top (a) Debarment. Any person may be debarred from using or benefiting from the inspection service provided under the regulations of this subchapter or under the terms of any inspection contract, and such debarment may apply to one or more plants under his control, if such person engages in one or more of the following acts or activities: (1) Misrepresenting, misstating, or withholding any material or relevant facts or information in conjunction with any application or request for an inspection contract, inspection service, inspection appeal, lot inspection, or other service provided for under the regulations of this subchapter. (2) Using on a processed product any label which displays any official identification, official device, or official mark, when the label is not currently approved for use by the Director or his delegate. (3) Using on a processed product any label which displays the words “Packed Under Federal Inspection, U.S. Department of Commerce”, or which displays any official mark, official device, or official identification, or which displays a facsimile of the foregoing, when such product has not been inspected under the regulations of this subchapter. (4) Making any statement or reference to the U.S. Grade of any processed product or any inspection service provided under the regulations of this subchapter on the label or in the advertising of any processed product, when such product has not been inspected under the regulations of this subchapter. (5) Making, using, issuing or attempting to issue or use in conjunction with the sale, shipment, transfer or advertisement of a processed product any certificate of loading, certificate of sampling, inspection certificate, official device, official identification, official mark, official document, or score sheet which has not been issued, approved, or authorized for use with such product by an inspector. (6) Using any of the terms “United States”, “Officially graded”, “Officially inspected”, “Government inspected”, “Federally inspected”, “Officially sampled”, or words of similar import or meanings, or using any official device, official identification, or official mark on the label, on the shipping container, or in the advertising of any processed product, when such product has not been inspected under the regulations of this subchapter. (7) Using, attempting to use, altering or reproducing any certificate, certificate form, design, insignia, mark, shield, device, or figure which simulates in whole or in part any official mark, official device, official identification, certificate of loading, certificate of sampling, inspection certificate or other official certificate issued pursuant to the regulations of this subchapter. (8) Assaulting, harassing, interfering, obstructing or attempting to interfere or obstruct any inspector or sampler in the performance of his duties under the regulations of this subchapter. (9) Violating any one or more of the terms of any inspection contract or the provisions of the regulations of this subchapter. (10) Engaging in acts or activities which destroy or interfere with the purposes of the inspection program or which have the effect of undermining the integrity of the inspection program. (b) Temporary suspension. (1) Whenever the Director has reasonable cause to believe that any person has engaged in any act or activity described in paragraph (a) of this section, and in such act or activity, in the judgment of the Director, would cause serious and irreparable injury to the inspection program and services provided under the regulations of this subchapter, the Director may, without a hearing, temporarily suspend, either before or after the institution of a debarment hearing, the inspection service provided under the regulations of this subchapter or under any inspection contract for one or more plants under the control of such person. Notice of suspension shall be served by registered or certified mail, return receipt requested, and the notice shall specifically state those acts or activities of such person which are the bases for the suspension. The suspension shall become effective five (5) days after receipt of the notice. (2) Once a person has received a notice of a temporary suspension, a debarment hearing will be set for 30 days after the effective date of the suspension. Within 60 days after the completion of the debarment hearing, the Hearing Examiner shall determine, based upon evidence of record, whether the temporary suspension shall be continued or terminated. A temporary suspension shall be terminated by the Hearing Examiner if he determines that the acts or activities, which were the bases for the suspension, did not occur or will not cause serious and irreparable injury to the inspection program and services provided under the regulations of this subchapter. This determination of the Hearing Examiner on the continuation or termination of the temporary suspension shall be final and there shall be no appeal of this determination. The initial decision by the Hearing Examiner on the debarment shall be made in accordance with paragraph (b)(1), Decisions, of this section. (3) After a debarment hearing has been instituted against any person by a suspension, such suspension will remain in effect until a final decision is rendered on the debarment in accordance with the regulations of this section or the temporary suspension is terminated by the Hearing Examiner. (4) When a debarment hearing has been instituted against any person not under suspension, the Director may, in accordance with the regulations of this paragraph (b) temporarily suspend such person, and the suspension will remain in effect until a final decision on the debarment is rendered in accordance with the regulations of this section or the temporary suspension is terminated by the Hearing Examiner. (c) Hearing Examiner. All hearing shall be held before a Hearing Examiner appointed by the Secretary or the Director. (d) Hearing. If one or more of the acts or activities described in paragraph (a) of this section have occurred, the Director may institute a hearing to determine the length of time during which the person shall be debarred and those plants to which the debarment shall apply. No person may be debarred unless there is a hearing, as prescribed in this section, and it has been determined by the Hearing Examiner, based on evidence of record, that the one or more of the activities described in paragraph (a) of this section have occurred. Any debarment or suspension must be instituted within two (2) years of the time when such acts or activities described in paragraph (a) of this section have occurred. (e) Notice of hearing. The Director shall notify such person of the debarment hearing by registered or certified mail, return receipt requested. The notice shall set forth the time and place of the hearing, the specific acts or activities which are the basis for the debarment hearing, the time period of debarment being sought, and those plants to which the debarment shall apply. Except for the debarment hearing provided for in paragraph (b) of this section the hearing will be set for a time not longer than 120 days after receipt of the notice of hearing. (f) Time and place of hearing. The hearing shall be held at a time and place fixed by the Director: Provided, however, The Hearing Examiner may, upon a proper showing of inconvenience, change the time and place of the hearing. Motions for change of time or place of the hearing must be mailed to or served upon the Hearing Examiner no later than 10 days before the hearing. (g) Right to counsel. In all proceedings under this section, all persons and the Department of Commerce shall have the right to be represented by counsel, in accordance with the rules and regulations set forth in title 43, Code of Federal Regulations, part 1. (h) Form, execution, and service of documents. (1) All papers to be filed under the regulations in this section shall be clear and legible; and shall be dated, signed in ink, contain the docket description and title of the proceeding, if any, and the address of the signatory. Five copies of all papers are required to be filed. Documents filed shall be executed by: (i) The person or persons filing same, (ii) by an authorized officer thereof if it be a corporation or, (iii) by an attorney or other person having authority with respect thereto. (2) All documents, when filed, shall show that service has been made upon all parties to the proceeding. Such service shall be made by delivering one copy to each party in person or by mailing by first-class mail, properly addressed with postage prepaid. When a party has appeared by attorney or other representative, service on such attorney or other representative will be deemed service upon the party. The date of service of document shall be the day when the matter served is deposited in the U.S. mail, shown by the postmark thereon, or is delivered in person, as the case may be. (3) A person is deemed to have appeared in a hearing by the filing with the Director a written notice of his appearance or his authority in writing to appear on behalf of one of the persons to the hearing. (4) The original of every document filed under this section and required to be served upon all parties to a proceeding shall be accompanied by a certificate of service signed by the party making service, stating that such service has been made upon each party to the proceeding. Certificates of service may be in substantially the following form: I hereby certify that I have this day served the foregoing document upon all parties of record in this proceeding by: (1) Mailing postage prepaid, (2) delivering in person, a copy to each party. Dated at __________ this _____ day of ______, 19__ Signature ________________ (i) Procedures and evidence. (1) All parties to a hearing shall be entitled to introduce all relevant evidence on the issues as stated in the notice for hearing or as determined by the Hearing Examiner at the outset of or during the hearing. (2) Technical rules of evidence shall not apply to hearings conducted pursuant to this section, but rules or principles designed to assure production of the most credible evidence available and to subject testimony to test by cross-examination shall be applied where reasonably necessary. (j) Duties of Hearing Examiner. The Hearing Examiner shall have the authority and duty to: (1) Take or cause depositions to be taken. (2) Regulate the course of the hearings. (3) Prescribe the order in which evidence shall be presented. (4) Dispose of procedural requests or similar matters. (5) Hear and initially rule upon all motions and petitions before him. (6) Administer oaths and affirmations. (7) Rule upon offers of proof and receive competent, relevant, material, reliable, and probative evidence. (8) Control the admission of irrelevant, immaterial, incompetent, unreliable, repetitious, or cumulative evidence. (9) Hear oral arguments if the Hearing Examiner determined such requirement is necessary. (10) Fix the time for filing briefs, motions, and other documents to be filed in connection with hearings. (11) Issue the initial decision and dispose of any other pertinent matters that normally and properly arise in the course of proceedings. (12) Do all other things necessary for an orderly and impartial hearing. (k) The record. (1) The Director will designate an official reporter for all hearings. The official transcript of testimony taken, together with any exhibits and briefs filed therewith, shall be filed with the Director. Transcripts of testimony will be available in any proceeding under the regulations of this section, at rates fixed by the contract between the United States of America and the reporter. If the reporter is an employee of the Department of Commerce, the rate will be fixed by the Director. (2) The transcript of testimony and exhibits, together with all briefs, papers, and all rulings by the Hearing Examiner shall constitute the record. The initial decision will be predicated on the same record, as will be final decision. (l) Decisions. (1) The Hearing Examiner shall render the initial decision in all debarment proceedings before him. The same Hearing Examiner who presides at the hearing shall render the initial decision except when such Examiner becomes unavailable to the Department of Commerce. In such case, another Hearing Examiner will be designated by the Secretary or Director to render the initial decision. Briefs, or other documents, to be submitted after the hearing must be received not later than twenty (20) days after the hearing, unless otherwise extended by the Hearing Examiner upon motion by a party. The initial decision shall be made within sixty (60) days after the receipt of all briefs. If no appeals from the initial decision is served upon the Director within ten (10) days of the date of the initial decision, it will become the final decision on the 20th day following the date of the initial decision. If an appeal is received, the appeal will be transmitted to the Secretary who will render the final decision after considering the record and the appeal. (2) All initial and final decisions shall include a statement of findings and conclusions, as well as the reasons or bases therefore, upon the material issues presented. A copy of each decision shall be served on the parties to the proceeding, and furnished to interested persons upon request. (3) It shall be the duty of the Hearing Examiner, and the Secretary where there is an appeal, to determine whether the person has engaged in one or more of the acts or activities described in paragraph (a) of this section, and, if there is a finding that the person has engaged in such acts or activities, the length of time the person shall be debarred, and the plants to which the debarment shall apply. [31 FR 16052, Dec. 15, 1966, as amended at 36 FR 18738, Sept. 21, 1971] Requirements for Plants Operating Under Continuous Inspection on a Contract Basis 1 top 1 Compliance with the above requirements does not excuse failure to comply with all applicable sanitary rules and regulations of city, county, State, Federal, or other agencies having jursidiction over such establishments and operations. § 260.96 Application for fishery products inspection service on a contract basis at official establishments. top Any person desiring to process and pack products in an establishment under fishery products inspection service on a contract basis, must receive approval of such buildings and facilities as an official establishment prior to the inauguration of such service. An application for inspection service to be rendered in an establishment shall be approved according to the following procedure: (a) Initial survey: When application has been filed for inspection service as aforesaid, NMFS inspector(s) shall examine the buildings, premises, and facilities according to the requirements of the fishery products inspection service and shall specify any additional facilities required for the service. (b) Final survey and establishment approval: Prior to the inauguration of the fishery products inspection service, a final survey of the buildings, premises, and facilities shall be made to verify that the buildings are constructed and facilities are in accordance with the approved drawings and the regulations in this part. (c) Drawings and specifications of new construction or proposed alterations of existing official establishments shall be furnished to the Director in advance of actual construction for prior approval with regard to compliance with requirements for facilities. [36 FR 21039, Nov. 3, 1971] § 260.97 Conditions for providing fishery products inspection service at official establishments. top (a) The determination as to the inspection effort required to adequately provide inspection service at any establishment will be made by NMFS. The man-hours required may vary at different official establishments due to factors such as, but not limited to, size and complexity of operations, volume and variety of products produced, and adequacy of control systems and cooperation. The inspection effort requirement may be reevaluated when the contracting party or NMFS deems there is sufficient change in production, equipment and change of quality control input to warrant reevaluation. Inspectors will not be available to perform any of employee or management duties, however, they will be available for consultation purposes. NMFS reserves the right to reassign inspectors as it deems necessary. (b) NMFS shall not be held responsible: (1) For damages occurring through any act of commission or omission on the part of its inspectors when engaged in performing services; or (2) For production errors, such as processing temperatures, length of process, or misbranding of products; or (3) For failure to supply enough inspection effort during any period of service. (c) The contracting party will: (1) Use only wholesome raw material which has been handled or stored under sanitary conditions and is suitable for processings; maintain the official establishment(s), designated on the contract in such sanitary condition and to employ such methods of handling raw materials for processing as may be necessary to conform to the sanitary requirements precribed or approved by NMFS; (2) Adequately code each primary container and master case of products sold or otherwise distributed from a manufacturing, processing, packing, or repackaging activity to enable positive lot identification to facilitate, where necessary, the segregation of specific food lots that may have become contaminated or otherwise unfit for their intended use; (3) Not permit any labels on which reference is made to Federal inspection, to be used on any product which is not packed under fishery products inspection service nor permit any labels on which reference is made to any U.S. Grade to be used on any product which has not been officially certified as meeting the requirements of such grade; nor supply labels bearing reference to Federal inspection to another establishment unless the products to which such labels are to be applied have been packed under Federal inspection at an official establishment; (4) Not affix any label on which reference is made to Federal inspection to any container of processed foods, produced in any designated official establishment, with respect to which the grade of such product is not certified because of adulteration due to the presence of contaminants in excess of limits established in accordance with the regulations or guidelines issued pursuant to the Food, Drug, and Cosmetic Act, as amended; (5) Not, with respect to any product for which U.S. Grade Standards are in effect, affix any label on which reference is made to Federal inspection to any container of processed food which is substandard: Provided, That such label may be affixed to any container of such substandard quality product if such label bears a statement to indicate the substandard quality; (6) Not, with respect to any product for which U.S. Grade Standard are not in effect, affix any label on which reference is made to the Federal inspection to containers of processed foods, except with the approval of NMFS; (7) Furnish such reports of processing, packaging, grading, laboratory analyses, and output of products inspected, processed, and packaged at the designated official establish-ment(s) as may be requested by NMFS, subject to the approval of the Bureau of the Budget in accordance with the Federal Reports Act of 1942; (8) Make available for use by inspectors, adequate office space in the designated official establishment(s) and furnish suitable desks, office equipment, and files for the proper care and storage of inspection records; (9) Make laboratory facilities and necessary equipment available for the use of inspectors to inspect samples of processed foods and/or components thereof; (10) Furnish and provide laundry service, as required by NMFS, for coats, trousers, smocks, and towels used by inspectors during performance of duty in official establishment(s); (11) Furnish stenographic and clerical assistance as may be necessary in the typing of certificates and reports and the handling of official correspondence, as well as furnish the labor incident to the drawing and grading of samples and other work required to facilitate adequate inspection procedures whenever necessary; (12) Submit to NMFS, three (3) copies of new product specifications in a manner prescribed by NMFS, and three (3) end-product samples for evaluation and/or laboratory analysis on all products for approval, for which U.S. Grade Standards are not available, when inspection is to be applied to such products. If requested of NMFS, such new specifications and end-product samples shall be considered confidential; (13) Submit, as required by NMFS, for approval, proofs prior to printing and thereafter four (4) copies of any finished label which may or may not bear official identification marks, when such products are packed under Federal inspection on a contract basis; (14) Not make deceptive, fraudulent, or unauthorized use in advertising, or otherwise, of the fishery products inspection service, the inspection certificates or reports issued, or the containers on which official identification marks are embossed or otherwise identified, in connection with the sale of any processed products; (15) Submit to NMFS, four (4) copies of each label which may or may not bear official identification marks, when such labels are to be withdrawn from inspection or when approved labels are disapproved for further use under inspection; (16) Notify NMFS in advance of the proposed use of any labels which require obliteration of any official identification marks, and all reference to the inspection service on approved labels which have been withdrawn or disapproved for use; (17) Accord representatives of NMFS at all reasonable times free and immediate access to establishment(s) and official establishment(s) under applicant's control for the purpose of checking codes, coded products, coding devices, coding procedures, official identification marks obliteration, and use of withdrawn or disapproved labels. (d) Termination of inspection services: (1) The fishery products inspection service, including the issuance of inspection reports, shall be rendered from the date of the commencement specified in the contract and continue until suspended or terminated: (i) By mutual consent; (ii) by either party giving the other party sixty (60) days' written notice specifying the date of suspension or termination; (iii) by one (1) day's written notice by NMFS in the event the applicant fails to honor any invoice within ten (10) days after date of receipt of such invoice covering the full costs of the inspection service provided, or in the event the applicant fails to maintain its designated plants in a sanitary condition or to use wholesome raw materials for processing as required by NMFS, or in the event the applicant fails to comply with any provisions of the regulations contained in this part; (iv) by automatic termination in case of bankruptcy, closing out of business, or change in controlling ownership. (2) In case the contracting party wishes to terminate the fishery products inspection service under the terms of paragraph (d)(1)(i) or (ii) of this section, either the service must be continued until all unused containers, labels, and advertising material on hand or in possession of his supplier bearing official identification marks, or reference to fishery products inspection service have been used, or said containers, labels, and advertising material must be destroyed, or official identification marks, and all other reference to the fishery products inspection service on said containers, labels, advertising material must be obliterated, or assurance satisfactory to NMFS must be furnished that such containers, labels, and advertising material will not be used in violation of any of the provisions of the regulations in the part. (3) In case the fishery products inspection service is terminated for cause by NMFS under the terms of paragraph (d)(1)(iii) of this section, or in case of automatic termination under terms of paragraph (d)(1)(iv) of this section, the contracting party must destroy all unused containers, labels, and advertising material on hand bearing official identification marks, or reference to fishery products inspection service, or must obliterate official identification marks, and all reference to the fishery products inspection service on said containers, labels and advertising material. After termination of the fishery products inspection service, NMFS may, at such time or times as it may determine to be necessary, during regular business hours, enter the establishment(s) or other facilities in order to ascertain that the containers, labels, and advertising material have been altered or disposed of in the manner provided herein, to the satisfaction of NMFS. [36 FR 21039, Nov. 3, 1971] § 260.98 Premises. top The premises about an official establishment shall be free from conditions which may result in the contamination of food including, but not limited to, the following: (a) Strong offensive odors; (b) Improperly stored equipment, litter, waste, refuse, and uncut weeds or grass within the immediate vicinity of the buildings or structures that may constitute an attractant, breeding place, or harborage for rodents, insects, and other pests; (c) Excessively dusty roads, yards, or parking lots that may constitute a source of contamination in areas where food is exposed; (d) Inadequately drained areas that may contribute contamination to food products through seepage or foot-borne filth and by providing a breeding place for insects or micro-organisms; If the grounds of an official establishment are bordered by grounds not under the official establishment operator's control of the kind described in paragraphs (b) through (d) of this section, care must be exercised in the official establishment by inspection, extermination, or other means to effect exclusion of pests, dirt, and other filth that may be a source of food contamination. [36 FR 21040, Nov. 3, 1971] § 260.99 Buildings and structures. top The buildings and structures shall be properly constructed and maintained in a sanitary condition, including, but not limited to the following requirements: (a) Lighting. There shall be sufficient light (1) consistent with the use to which the particular portion of the building is devoted, and (2) to provide for efficient cleaning. Belts and tables on which picking, sorting, or trimming operations are carried on shall be provided with sufficient nonglaring light to insure adequacy of the respective operation. Light bulbs, fixtures, skylights, or other glass suspended over exposed food in any step of preparation shall be of the safety type or otherwise protected to prevent food contamination in case of breakage. (b) Ventilation. There shall be sufficient ventilation in each room and compartment thereof to prevent excessive condensation of moisture and to insure sanitary and suitable processing and operating conditions. If such ventilation does not prevent excessive condensation, the Director may require that suitable facilities be provided to prevent the condensate from coming in contact with equipment used in processing operations and with any ingredient used in the manufacture or production of a processed product. (c) Drains and gutters. All drains and gutters shall be properly installed with approved traps and vents. The drainage and plumbing system must permit the quick runoff of all water from official establishment buildings, and surface water around buildings and on the premises; and all such water shall be disposed of in such a manner as to prevent a nuisance or health hazard. Tanks or other equipment whose drains are connected to the waste system must have such screens and vacuum breaking devices affixed so as to prevent the entrance of waste water, material, and the entrance of vermin to the processing tanks or equipment. (d) Water supply. There shall be ample supply of both hot and cold water; and the water shall be of safe and sanitary quality with adequate facilities for its (1) distribution throughout buildings, and (2) protection against contamination and pollution. Sea water of safe suitable and sanitary quality may be used in the processing of various fishery products when approved by NMFS prior to use. (e) Construction. Roofs shall be weathertight. The walls, ceilings, partitions, posts, doors, and other parts of all buildings and structures shall be of such materials, construction, and finish as to permit their efficient and thorough cleaning. The floors shall be constructed of tile, cement, or other equally impervious material, shall have good surface drainage, and shall be free from openings or rough surfaces which would interfere with maintaining the floors in a clean condition. (f) Processing rooms. Each room and each compartment in which any processed products are handled, processed, or stored (1) shall be so designed and constructed as to insure processing and operating conditions of a clean and orderly character; (2) shall be free from objectional odors and vapors; and (3) shall be maintained in a clean and sanitary condition. (g) Prevention of animals and insects in official establishment(s). Dogs, cats, birds, and other animals (including, but not being limited to rodents and insects) shall be excluded from the rooms from which processed products are being prepared, handled, or stored and from any rooms from which ingredients (including, but not being limited to salt, sugar, spices, flour, batter, breading, and fishery products) are handled and stored. Screens, or other devices, adequate to prevent the passage of insects shall, where practical, be provided for all outside doors and openings. The use of chemical compounds such as cleaning agents, insecticides, bactericides, or rodent poisons shall not be permitted except under such precautions and restrictions as will prevent any possibility of their contamination of the processed product. The use of such compounds shall be limited to those circumstances and conditions as approved by NMFS. (h) Inspector's office. Furnished suitable and adequate office space, including, but not being limited to, light, heat, and janitor service shall be provided rent free in official establishments for use for official purposes by the inspector and NMFS representatives. The room or rooms designated for this purpose shall meet with the approval of NMFS and shall be conveniently located, properly ventilated, and provided with lockers or cabinets suitable for the protection and storage of inspection equipment and supplies and with facilities suitable for inspectors to change clothing. (i) Adequate parking space, conveniently located, for private or official vehicles used in connection with providing inspection services shall be provided. [36 FR 21040, Nov. 3, 1971] § 260.100 Facilities. top Each official establishment shall be equipped with adequate sanitary facilities and accommodations, including, but not being limited to, the following: (a) Containers approved for use as containers for processed products shall not be used for any other purpose. (b) No product or material not intended for human food or which creates an objectionable condition shall be processed, handled, or stored in any room, compartment, or place where any fishery product is manufactured, processed, handled, or stored. (c) Suitable facilities for cleaning and sanitizing equipment (e.g., brooms, brushes, mops, clean cloths, hose, nozzles, soaps, detergent, sprayers) shall be provided at convenient locations throughout the plant. [36 FR 21040, Nov. 3, 1971] § 260.101 Lavatory accommodations. top Modern lavatory accommodations, and properly located facilities for cleaning and sanitizing utensils and hands, shall be provided. (a) Adequate lavatory and toilet accommodations, including, but not being limited to, running hot water (135 °F. or more) and cold water, soap, and single service towels, shall be provided. Such accommodations shall be in or near toilet and locker rooms and also at such other places as may be essential to the cleanliness of all personnel handling products. (b) Sufficient containers with covers shall be provided for used towels and other wastes. (c) An adequate number of hand washing facilities serving areas where edible products are prepared shall be operated by other than hand-operated controls, or shall be of a continuous flow type which provides an adequate flow of water for washing hands. (d) Durable signs shall be posted conspicuously in each toilet room and locker room directing employees to wash hands before returning to work. (e) Toilet facilities shall be provided according to the following formula: ------------------------------------------------------------------------ Toilet Number of persons bowls required ------------------------------------------------------------------------ 1 to 15, inclusive.......................................... 1 16 to 35, inclusive......................................... 2 36 to 55, inclusive......................................... \1\ 3 56 to 80, inclusive......................................... \1\ 4 For each additional 30 persons in excess of 80.............. \1\ 1 ------------------------------------------------------------------------ \1\ Urinals may be substituted for toilet bowls but only to the extent of one-third of the total number of bowls required. All toilet equipment shall be kept operative, in good repair, and in a sanitary condition. [36 FR 21041, Nov. 3, 1971] § 260.102 Equipment. top All equipment used for receiving, washing, segregating, picking, processing, packaging, or storing any processed products or any ingredients used in the manufacture or production thereof, shall be of such design, material, and construction as will: (a) Enable the examination, segregation, preparation, packaging, and other processing operations applicable to processed products, in an efficient, clean, and sanitary manner, and (b) Permit easy access to all parts to insure thorough cleaning and effective bactericidal treatment. Insofar as is practicable, all such equipment shall be made of smooth impermeable corrosion-resistant material that will not adversely affect the processed product by chemical action or physical contact. Such equipment shall be kept in good repair and sanitary condition. Such equipment shall be cleaned and sanitized at a frequency as is necessary or required in accordance with Good Manufacturing Practice Regulations, 21 CFR part 128. [36 FR 21041, Nov. 3, 1971] § 260.103 Operations and operating procedures shall be in accordance with an effective sanitation program. top (a) All operators in the receiving transporting, holdings, segregating, preparing, processing, packaging, and storing of processed products and ingredients, used as aforesaid, shall be strictly in accord with clean and sanitary methods and shall be conducted as rapidly as possible and at temperatures that will inhibit and retard the growth of bacterial and other micro-organisms and prevent any deterioration or contamination of such processed products or ingredients thereof. Mechanical adjustments or practices which may cause contamination of foods by oil, dust, paint, scale, fumes, grinding materials, decomposed food, filth, chemicals, or other foreign materials shall not be conducted during any manufacturing or processing operation. (b) All processed products, raw materials, ingredients, and components thereof shall be subject to inspection during each manufacturing or processing operation. To assure a safe, wholesome finished product, changes in processing methods and procedures as may be required by the Director shall be effectuated as soon as practicable. All processed products which are not manufactured or prepared in accordance with the requirements contained in §260.96 to §260.104 or are unwholesome or otherwise not fit for human food shall be removed and segregated prior to any further processing operation. (c) Official establishments operating under Federal inspection should have an effective quality control program as appropriate for the nature of the products and processing operations. (d) All ingredients used in the manufacture or processing of any processed product shall be wholesome and fit for human food. (e) The methods and procedures employed in the receiving, segregating, handling, transporting, and processing of ingredients in official estab lishment(s) shall be adequate to result in a satisfactory processed product. Such methods and procedures include, but are not limited to, the following requirements: (1) Containers, utensils, pans, and buckets used for the storage or transporting of partially processed food ingredients shall not be nested unless rewashed and sanitized before each use; (2) Containers which are used for holding partially processed food ingredients shall not be stacked in such manner as to permit contamination of the partially processed food ingredients; (3) Packages or containers for processed products shall be clean when being filled with such products; and all reasonable precautions shall be taken to avoid soiling or contaminating the surface of any package or container liner which is, or will be, in direct contact with such products. (f) Retention tags: (1) Any equipment such as, but not limited to, conveyors, tillers, sorters, choppers, and containers which fail to meet appropriate and adequate sanitation requirements will be identified by the inspector in an appropriate and conspicuous manner with the word “RETAINED.” Following such identification, the equipment shall not be used until the discrepancy has been resolved, the equipment reinspected and approved by the inspector and the “RETAINED” identification removed by the inspector. (2) Lot(s) of processed products that may be considered to be mislabeled and/or unwholesome by reason of contaminants or which may otherwise be in such condition as to require further evaluation or testing to determine that the product properly labeled and/or wholesome will be identified by the inspector in an appropriate and conspicuous manner with the word “RETAINED.” Such lot(s) of product shall be held for reinspection or testing. Final disposition of the lot(s) shall be determined by NMFS and the removal of the “RETAINED” identification shall be performed by the inspector. [36 FR 21041, Nov. 3, 1971] § 260.104 Personnel. top The establishment management shall be responsible for taking all precautions to assure the following: (a) Disease control. No person affected by disease in a communicable form, or while a carrier of such disease, or while affected with boils, sores, infected wounds, or other abnormal sources of microbiological contamination, shall work in a food plant in any capacity in which there is a reasonable possibility of food ingredients becoming contaminated by such person, or of disease being transmitted by such person to other individuals. (b) Cleanliness. All persons, while working in direct contact with food preparation, food ingredients, or surfaces coming into contact therewith shall: (1) Wear clean outer garments, maintain a high degree of personal cleanliness, and conform to hygenic practices while on duty, to the extent necessary to prevent contamination of food products. (2) Wash and sanitize their hands thoroughly to prevent contamination by undesirable microorganisms before starting work, after each absence from the work station, and at any other time when the hands may have become soiled or contaminated. (3) Remove all insecure jewelry and, when food is being manipulated by hand, remove from hands any jewelry that cannot be adequately sanitized. (4) If gloves are used in food handling, maintain them in an intact, clean, and sanitary condition. Such gloves shall be of an impermeable material except where their usage would be inappropriate or incompatible with the work involved. (5) Wear hair nets, caps, masks, or other effective hair restraints. Other persons that may incidentally enter the processing areas shall comply with this requirement. (6) Not store clothing or other personal belongings, eat food, drink beverages, chew gum, or use tobacco in any form in areas where food or food ingredients are exposed or in areas used for washing equipment or utensils. (7) Take any other necessary precautions to prevent contamination of foods with microorganisms or foreign substances including, but not limited to perspiration, hair, cosmetics, tobacco, chemicals, and medicants. (c) Education and training. Personnel responsible for identifying sanitation failures or food contamination should have a background of education or experience, or a combination thereof, to provide a level of competency necessary for production of clean wholesome food. Food handlers and supervisors should receive appropriate training in proper food-handling techniques and food-protection principles and should be cognizant of the danger of poor personal hygiene and unsanitary practices, and other vectors of contamination. [36 FR 21041, Nov. 3, 1971] Labeling Requirements top §§ 260.200-260.201 [Reserved] top